64 AutoDesk Inventor Tutorial: Work Axis Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

Toria 64 for inventor this tutorial
we're going to talk about the next
feature the axis this also for helping
you drawing or having reference guiding
lines or axis for your 3d modeling so
now let's open the access menu here you
have the default access or work access
it can make any type of access depending
on your selections so this is kind of
quiet and fast to use now if you need
more specific types you have online or
on edge you can see all the difference
types so for now we can select the
access if you take the cylinder you will
create axis for that cylinder and again
this activate the default access tool
and if you should pick that edge you are
able to see lick or insert and axis on
that edge notice select that point so
you'd notice the pure every to take
point
let's lick that point so now you insert
the fast axis so here you can also do
the same thing on line what we created
with the fast so for that line or edge
so your every just slick edge you are
not able to select a cylinder or
anything else
so this go to through two points so if
we select that it you are not able to
select an edge so if you select that
point and that point so you're able to
create that axis again you have
different types of access you have also
part to learn through point you simply
click that point so
you're creating the axis view over over
it can change its positions dragging
pulling also you have the type of axis
intersection of two planes so let's
select this time select this plane and
select another player here so you are
able to create that access of
intersection