4- CATIA Beginner Tutorial: Line tool vs. Profile tool Video Lecture | Learning CATIA: For Beginners - Design Softwares

welcome to to the number four we already
start talking about sketching and make
some sketches in the previous tutorial
now I'm going to continue talking also
about sketches so let's start a new part
from five this time new and here you
pick part okay and let's start a new
sketch we know how to start the sketcher
and this time we're going to talk about
the let's take this menu here we took
the last tutorial about the tangle tools
be more clear strike it here and now
we're going to talk about the profile
and the line so and see the difference
between both two so let's start with the
line and here in the sketch to mini
Rashidi coordinates of the line and the
angle of the line so when you're finish
you click it's done you want to draw
another line just like the way the line
tool again and start another line as you
notice each time we need to pick the
line tool and here if you look new hover
at the end point of this last segment
you see a blue dot that mean you are
starting the new line exactly on the end
of this line
now again last time
we're going to close its profile but if
you use the profile tool is more easier
and time-saving
you just pick at one time and stop
drawing the line the the need put it all
the time activating the tool and here we
have our profile also with the profile
tool you can draw arcs reserved this
start profile and if you click and hold
the mouse the profile change to be an
arc now this tool line hold you see this
hand now you have an arc so you created
this profile easily with only the
profile tool and if you hover over the
line tool you see different type of
lines for a beginner this is this line
the first one is the most used one but
mostly you're going to use the profile
tool and the other tribes if you hope
are you can see the type of these lines
and with more practice you're going to
automatically know how these lines works
in the future to us for a beginner could
be enough with the profile the line tool
so now I can't close this tutorial not
in the next tutorial I'm going to talk
about the dimensions how to add
dimensions and constraints to make you
provide more accurate so see you in the
next tutorial