How to draw Isometric Drawing in AutoCAD Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in previous tutorial we have learned
isometric drawing basics so in this
tutorial we will be creating one
isometric drawing based on what we learn
in previous tutorial so we will be
creating this drawing the limits for
this drawing will be 200 comma 200 so at
first we'll set the limits use the
limits command lower left corner 0 comma
0 enter upper right corner 200 comma 200
then we have to limit the enter a enter
then shift to isometric mode do snaps st
yl command press enter then well enter 1
for isometric then press Enter so your
cursor has gone inside then at first we
will create this rectangle of 80 by 120
so take line come at
get to this point then for line to the
straight make ortho on then give the
length of 120 enter now I want to go on
this side so press F for you on keyboard
to change the ISO plane give the length
of 80 again I can break this point for
tracking this point properly here to
right click on folder tracking go to
city and set the increment angle to 30
and tiki our track is track using all
polar angle settings then only it will
track in 30 degree so it's us you have
to make this setting and okay then only
you will be able to track this then
click and click then I want to go down
so again f4 you press f5 to change ISO
plane and height is 50 then again I will
track this click press ENTER to come out
now here isometric sorry so at first I
will shift this for that you UCS icon
enter no region then take release excess
income and then click on ISO circle then
specify center point here and give the
radius of 40 so trim the unwanted so
from keyboard you can type TR 14
shortcut for trim select cutting edges
enter select object to trim enter then I
want to create internal circle so again
elites accessing then ISO circle when
Center Point's radius is 16
so this object has been created
the next will be this object to be
copied at 20:00 distance behind we will
just copy it so click copy select object
has many object as you want then enter
give the base point then give the
direction I want to go there so I will
just press f5 to change the ISO plane
and give the distance of 20 press ENTER
then again press ENTER to come out then
here one line will be required so I will
take line and I have to draw it from
quadrant two quadrant then enter then
trim the unwanted objects TR enter slick
cutting edges then enter and remove the
unwanted objects then press ENTER to
come out now here I want one line so I
will copy it so that line is at a
distance of 15 so I will copy this line
enter base point Direction 15 Direction
distance is 15 then press Enter and come
then I have to copy this object there so
I will say copy select all the object
then enter and then give the basement so
this point will be coming here so I will
take this as a basement and second point
will be the design point then press
ENTER to come out then trim the unwanted
TR enter
and press enter and remove the unwanted
objects
press ENTER to come out because I do not
want this line also then again trim PR
enter these to enter remedies to enter
then next will be to create the upper
portion so there are two circles are
there 80 diameter 60 diameter and height
is 20 so we will create one circle so
taking a check so st. ISO circle then
drag the point midpoint of this and
midpoint of this just order for the
while and crack it click here then it is
coming in vertical plane so by pressing
f5 you we will change the plane give the
radius of 40 then we will copy it select
object enter basement direction to
change the plane press F for you and
give a distance of 20 press ENTER again
press ENTER to come out then I will draw
lines from quadrant of this point to
this point presenter presenter to repeat
from quadrant of this to this enter then
again trim select object to be cut this
enter remove this worker and
again train suppose this circle and this
line enter remove this portion enter
then one more circle is here sixty
diameter so again acts in its axis and I
so circle then center point if for you
to change the ISO plane then radius of
30 then again the circle up then the
depth here is 15 so here we can see the
depth is 50 will copy the circle below
by 15 distance to copy select object
enter base point again it for you press
avail to change the direction give the
distance of 15 press enter to come out
then trim the unwanted frame cutting
edge is this enter images then one more
circle is there of 30 diameter so we
will create it again ellipse axis and
ISO circle so the centre will be center
of this circle centre point below f4u
then give the radius of 15 then trim
unwanted lake at images enter select
object room enter so in this way this
objective created then next thing will
be to give the dimensions so let's start
with 30 to 50 all the dimensions we will
give step by step so for dimension we
have to use aligned we will take from
end of this to end of this you go down
click
then at a notate take continue okay at
first we have to use for current we have
to use continue we have to use this as
the first one and this as a second point
then continue then click on second one
enter now this dimension is not properly
visible so UD enter for dimension style
modify it and in the food section you
increase the scale to 20 then in primer
units precision we need single zero in
text we need eatable and iso standard
okay close should those are visible
properly then again aligned do this
first first point second point discuss
again here enter to repeat the command
press this point this point here then I
can enter to repeat the command this
point now here you have to track this
point so that we will change the ISO
plane f5 so that it will automatically
get a point in line of below point again
give the response then we have two
oblique this dimension so click on ugly
select this is the omission because they
are in the same direction vertical
direction then enter the oblique angle
of 90 so those will be vertical then
press ENTER again to repeat the command
select public option this one enter
angle will be 150
again for the center oblique select
object enter public angle will be in
this direction 30 degree then next will
be diameter of the spherical so for that
we will use multi leader click on this
quadrant and click here then put there
30 diameter from symbol diameter click
outside now this multi leader is not
visible so we will go to multileader
style manager modify later style here we
will put 20 okay close so it will give
visible properly then we stop to circle
distance for that if you want to give it
like this so we will need this line
there so we will create one line so for
that line from the center of this go a
bit outside to here
enter then one more line for circle
okay it is packing too many things so
we'll change the plane f5 and click here
this clip then we will again go for
aligned then click this point this point
and location area again enter to repeat
the command of align dimension first
point second point location then make
visual dimension of Li click on on
annotate dimensions oblique then select
these two dimension enter angle will be
this like this so 150 degrees
so those has been you can click on it
and arrange bring it forward
place escape to come out
then here 20 is required again aligned
so you are quadrant two quadrant and
click on quadrant only here 15 is
required again quadrant two quadrant and
click on quadrants so 15 is done then we
are to apply the layer we will go for
this their properties quickly will
create center color line type load 3 ok
centaur ok for 0 we will give some color
and for dimension also will you color
different color so you take this ok
close this and select click on all the
dimension
and click on the dim layer escape then
for Center select all the centerline
will click on Center escape Center not
visible properly so ults command enter
increase the value to for you so in this
case we are CH at this time so we will
stop here thanks for join