AutoCAD Tips and Tricks Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

so in this lecture we plan to cover this
sieges difference.if is available below
here then we will see the selection
methods and what are the tools for
selection then we will be covering the
concept of you units also and we will be
seeing how to do work in multiple
documents so these are the topics that
we are going to cover today so in these
switches we have already seen the ortho
mode using f8 you can make it on and off
so artha mode creates straight line that
we are already seen in our first
tutorial so next is polar tracking next
is polar tracking
so using this polar tracking you can
track the angles so normally when we
work with line command
it shows the angle there but we don't
recognize which angle is coming right
now there suppose I will make this polar
tracking on by clicking on it so here
you can see that polar on then I will
right-click on the polar tracking and I
will take a setting option there
right click setting then this dialog box
will come so in this dialog box
increment angle has been set as 30
degree okay I will keep that as it is so
what will happen now
now polar tracking is on increment angle
is 30 so when I create line by clicking
on first point when I move to 30 angle
it shows that tracking tracking it shows
so if I goes to 60 so any every angle
incrementing in the in 30 day or 30
incrementing by 30 is shown or tracked
by that polar tracking so in this way
you can know when that particular angle
has been reached so 30 60 90 for every
13 remained angle it is showing that
tracking so using this you can easily
create the object suppose I want to
create
line in 30-degree so 30 degrees already
there so you do not have to put that
angle you can directly give the length
suppose I want the five lengths enter
then I want to create some line in
suppose 120 degree so I will just show
120 is there so I will just put the line
3 then I want to create a line in 150
degrees so 150 degrees cutter coming
correctly so I will just put the length
so in this way you can use the polar
tracking so it will track the angles so
whatever angle you can put there what
adequate angle you can put there then
next funda is object snap so we have
seen that already the endpoint midpoint
perpendicular and all those things are
called as object snaps so if this object
snap normally what happens when we
create one to create some object suppose
I want to create a liar circle circle on
the midpoint is from I take the cursor
and the midpoint of the line it directly
shows the midpoint so this is possible
because this object object snap is on so
if I click on this and make it off and
if I try to take my cursor near the line
it will not show the object snap so now
in normal working this object snap
should be on then only it will show the
object snaps again if you write the
object snaps also have the setting you
just have to right click on the object
snap and click on settings so here you
will see that some object snaps has been
selected by green ticks so the objects
knife which are selected by green ticks
will be showing automatically and the
objects necks which are not ticked will
you have to pick it manually by shift
right clicking so whatever object snap
you need that you can make it on by
clicking on it
so in this way you can use the object
snap concept then next is object snap
tracking so this object snap tracking is
basically useful to locate a point with
respect to other points suppose for
example suppose I have this rectangle
and at the ray center of this rectangle
I want to create a circle so normally I
draw the one horizontal line from MIT to
MIT and then a at that midpoint I create
the circle but using this object snap
tracking as the object snap tracking is
on so I will just say circle then I will
I know that this center point will come
at the midpoint of this line and
midpoint of this line so I will just
take my cursor over the abaut line so it
is marking there it is marking with ello
there so I will take on this line also
made of this line and when I come back
to maybe a center point it automatically
takes that point with respect to those
two points so I can click and I can
locate object so in this way you can use
a object snap tracking to look at some
object with respect to other objects or
objects snap tracking can also be used
suppose I have one drawing here so
object snap tracking can also be used to
track the views suppose I have created
this view or duty and I from that I want
to create this view so I will just erase
it and we will create it using object
snap tracking so now this front view I
will need inline in this line so I will
just say line I will just take my cursor
on the corner and I will come down I
will not click there and I will click
here so that point will exactly start in
that line again the length of this line
will be I will be tracking from the
above line so in this way I can create
but I can I will make Thor Athan so that
lines will come straight so here I will
put the height is thirty suppose then
lengths again I will track this point
then a height is 20 then again this
length I will tracking from this point
then I will track this height from this
point I will track this length from this
point and in this way I have create
completed this object so in the centre
object we can track from circle so I
will take my cursor on the quadrant I
will come down it is showing
intersection there I will click so I
want to come down by 10 distance again I
want to track this circle then again I
will track this end
so this portion is completed again line
internal circle I will track I will
track this midpoint so this line is
completed then again I will track this
side the internal circle point quadrant
point then I will track this midpoint so
in this way you can use object snap
tracking to take the projections so that
is the front of object snap tracking
then next is dynamic input so because of
the dynamic input you can see the
message at the cursor this plus cursor
you are seeing a massive specify first
point so that is possible because
dynamic input is on suppose if this
dynamic input is off and if I give the
line then that message is not coming
there then that message is coming down
here and if I click the first point I
cannot give the length and angle also so
in this way you can make the dynamic
input on so that will make your drafting
simpler or in our lair tutorials it is
very important that you keep this
dynamic input on then only you will be
able to create the object if now I will
take the line first point so you can see
that because as dynamic input is on it
is showing the length and angle there so
in this way you can use dynamic input
then next is we seen in previous
tutorial hide show line weight the layer
concept then next is quick properties if
discrete properties is on now normally
what happens now cute properties is
azaab suppose if I select the line then
nothing will happen but suppose is
discrete properties you know and if I
select the line it will show this dialog
box here so from this dialog box you can
very quickly change the layer color and
line type you can see the length of the
line also same way suppose if i select
the circle it will show the circle
properties complete radius diameter
circumference and all those things and
one more thing is there if you want a
circle of some particular area it will
automatically adjust suppose I want 3000
area circle so it will automatically
adjust the radius and all those two
so in this way you can use this click
properties dialog box if you do not want
this you just click on this click
properties and it will get off so it
will be a normal behavior so in this way
you can use these different switches now
next topic we will see the selection
methods what are the different selection
methods how to use it so number of times
when we use button command from this
toolbar it shows select object prompt to
you so using this select object when you
click this select toggle object on the
right side and comes to left side a
green dotted line is shown so this green
dotted line is called as crossing window
so the property of crossing window is it
will select all the object those are
complete inside this window and the
object cross by this window so here if
we click here you will see that all
these line all these object has been
selected and the other option is if I
click on the left side and comes on the
right side then it will select only
object those are complete inside the
window so it will select only this
circle and line if I click here it will
select only circle and line so in this
way you can use window and crossing
window so you can see that when I go on
right side it creates a blue window if I
goes on right left side it creates a
green window and we have seen the
properties then if by mistake if I get
select something suppose eyes by mistake
I select these two circles then I can
cancel selection of those two circles by
pressing the shift and clicking on that
circle so in this way you can cancel
your selection by pressing shift and
clicking on the unrequired object so in
this way you can use different selection
methods then next concept is that of
units so I will delete this object from
format units you can change the unit so
there are different by different
normally for mechanical tank decimal
unit is sufficient
if you want inches then you have to
either select architecture all the
engineering then it will take at a unit
as inches you can also control the
inches if you want to create something
in inches then just say ok and if I now
take the line option so it will show me
the length in feet inches automatically
so if I want to suppose I will say a fit
to draw straight lines suppose I want to
create a line obtain fit then I have to
say then fit single quote you have to
you then it will create a line of 10
feet if I give only 10 then it will
create a line of 10 inches so that you
have to take care of line if suppose I
want to create a line of 50 inches then
I can directly say here 50 so it will
create that line of 50 inches but if I
want to create a line of suppose for you
feet 10 inches then you have to whenever
you want to create a line in a fit you
always have to remember that you have to
you fit a single quote 5 feet 10 inches
so it will create a line of 5 feet 10
inches so in this way you can create the
object in inches also so by going back
to format units you can come back to
normal units by pressing on this symbol
from here you can control the precision
how accurately or up to or how many
digits it should show the values same
way you can change the unit for angle
also and you can control the precision
also from here so in this way you can
change the unit or control the precision
then next funda is suppose I have
multiple trunk open suppose I will close
this drawing and I will open to three
drinks suppose idea I have this one
drying I will open this is the one more
drying and this is the one more drawing
so suppose that time you can see from
window here three drawings are open so
you can click on any drawing and you can
go to that drawing but you can use the
ctrl tab as a shortcut to traverse to
the train from one drawing you can go to
other drawing using ctrl tab also
suppose if you want
see all the wrong at a time then you can
use either tide law horizontally or tile
vertically suppose I use style
vertically so it is showing me all the
Rings at a time so in this way you can
use the tile vertically and suppose I
want to transfer some object from one
trend to other trying suppose I want to
transfer Jen just select that object and
click on this copy or control C then go
inside other ring and just say paste so
you in this way copy and pasting you can
transport ring from one drawing to other
drawing so if you want to come back to
single format just maximals any drawing
that is required and you will be back
into a single format so in this way we
have completed this tutorial thanks for
joining