AutoCAD 3D House Modeling Tutorial - 8 | 3D Home | 3D Building | 3D Floor Plan | 3D Room Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will see how to
create railings for stairs so at first
we wish to click on view and take the
top UCS you say shall stop then go back
to home and select circle as a circle
command circle give the center point and
a radius of 25 so 50 diameter rod here
we will be creating so you just place
tool this respond go inside the circle
and give the height of 750 then copy
this rod or we will give the color to
this rod or target it is black only we
will keep it is black copy then take the
quadrant of this side and this quadrant
we will make the ortho of if it is on we
will put it on the stairs midpoint this
rod we will put at the midpoint of this
stairs
okay eske then we will copy this rod by
leaving once stairs in between so just
take the basement of this and we will
copy it here so we will in between we
would leave one step and on alternate
steps we'll copy this rod then copy here
take the end point then take the end
point here
okay then we will put it here at the end
of this
then one at the mid mid of this line
then one here so you will take the
nearest base point ship right leg
nearest here I want to put one
then one at the corner
then
we'll put the here also
at the end of this then at the end of
this
by living one step you'll copy
all right then we will just remove this
we do not want this then we will move it
in between give the base point second
point okay just make earth on so it will
move straight all right then we will
move this rod at the end just move
select this Road enter then take the
quadrant so we will take this quadrant
okay we will put at the end of the slab
then we will move move it inside by 2550
so it will come inside 50 all right then
move it inside by 25
select object enter base point direction
25 distance then 25 backward 25 so it
will be exactly put on the corner then
we will copy this on that side so just
copy select object enter give the base
point give the second point suppose
wanna Arad I will put it here next will
be here then next we just zoom - so that
I can view it properly then next here
then next further there
okay we'll just make the post nabob so
it will not go anywhere ap for making
the object nur of this place the three
then one last at the corner all right
Saul unwanted ah I will just see this
these rods this has been copied by
mistake so in this way we have put all
the rods now we want rods on this side
also so we will just copy the these rods
there copy select all these this side
rods
so here one step has been left extra so
we will take it down just move move this
rod down and up this you take a plea
make object snap on and up this to the
end of this and again we have to move it
down also and up this to the end of this
okay then we will copy these rods on
that side also copy just select all
these low rods
then do the base point give the
direction and give the distance of one
meter is total minus 50 that means nine
five zero so it will be placed on that
side directly all right now same way we
have to copy here on this platform also
just say copy okay so just say copy then
select one rod and then take this
quadrant this side quadrant just zoom it
take the quadrant or mid mid will also
do quadrant one built in 2.0
what Campbell point take the midpoint
and put it on this platform suppose I
want to put one at the mid make earth op
with the mid of this platform
just take the midpoint of this lag form
settings it is taking some other way but
I will just orbit okay now take the
midpoint out okay this midpoint then
this end point when I cut the end point
so it is taking with it time for the
object snap so otherwise we will copy
this copy this at find a distance find a
minus
5450 distance make earth on 450 make
objects snap off at a distance of 450
all right now we will move it the
quadrant of this do the basement give
the direction we will move it by suppose
200
then 15 said alright then this we will
copy here again take the copy select
object give the basement give the
direction suppose I want just make it
three six now pop I want to one node
here I want to one rod here and one dot
at this point
okay scape to come out
it is this extra one okay so in this way
all rod has been placed properly now I
want then top rod is needed connecting
all these roads so for that you have to
give 3d polyline command just takes 3d
polyline then go to the bottom rod and
take this ended up top just take the
center of this top make a object upon f3
Center then zoom - make earth off and
take the center of this top top rod
again so just zoom with the zoom there
and take the center okay
again from here we will take the center
up next what this row then center of
this row so we are currently we are
given a 3d polyline command so we will
connect the last rod okay so all rods
has been connected in this way then on
this side also we will again give 3d
polyline and we will connect these rods
also so just say take the center of this
rod center of top rod
from there
zoom inside take the center of this rod
okay so - pan it down then take the
center of this rod first rod then Center
up top rod
here
then this rod this one and the last one
so in this with this side 3d polyline is
also ready now we will just create our
two circles and just create a circle of
twenty five areas two circles just copy
the last circle and keep it ready for
other ship then we will form this
reading by a swift command so just click
on extrude arrow below extrude just say
sweep
then select object to sweep take this
circle then press ENTER then sweep path
take this 3d polyline we just created so
this one railing is ready again say
sweep press ENTER to repeat the command
select this circle enter say path is
this 3d polyline other 3d polyline so in
this way we have created this railing
then we will also need the opening here
actually for entry so for that we will
just switch back to back UCS just say
back we are on the back side then just
create two vertical lines from the end
of this platform and make earth on make
objects snap off this one line and other
line from the other end of the make a
three again
then go up and click just make object
snap off so it will not take unwanted
then just zoom it and press bullet so
that opening will be clear for entry
just go back to home preschool and take
this portion here okay go inside and
click so in this way this portion is
open now just delete these lines that
that we have created just now and so -
so in this way we have created the
railings for the stairs so that is all
we'll stop here thanks for joining
[Music]
you
you