AutoCAD 2015 Line Command Tutorial Complete. Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn line
command so here is the line command
so line command you can give in two ways
by clicking here or you can also type L
and press enter
so both way you can give the line
command array in fact any command you
can give in two ways from keyboard or by
clicking on the icon so I will take line
L enter then specify first point so from
which point you want to start click
there suppose I want to start from here
so click the small button and take your
cursor away and if I want this line to
be straight here you can see that the
polar tracking is on so it is
automatically coming straight and if you
don't want to go in the angle and if you
want it straight whenever you take it
anywhere then you can make the ortho on
for that to force if you want to force
it to be straight only then you have to
make the earth on so from here you can
make the ortho mode on or if it is the
shortcut key for keyboard if if you want
to make it on from keyboard you can
press F it also so click here and then
give the direction where you want to go
suppose I want to go in this direction
then type the length how much length you
want suppose I want it to be handed then
press ENTER then take your cursor above
suppose I want to go ago we can give the
link suppose I want it to be 50 press
ENTER then I want to go on the left side
again give the length hundred enter if
during bring the line command or
creating line command if you make some
mistake and if you want to cancel the
last line command then you can click on
this undo click on this undo button so
your last line will be cancel or you can
also give you enter suppose I can I will
give the length enter then if you want
to connect this this point and this
point
that means last point and the first
point then you can click on this close
or you can also use C enter for that
click on this close so the line will be
created automatically joining the last
point and the first point and your line
command will be completed and here you
can view that this command line is empty
that means your command is completed
nothing is running and if you want to
remove this object we can use the rich
Gomberg just click on the rates and you
can click at the empty space and create
the window crossing window and click
second point and press enter so all the
objects will be it is or you can also
individually click on them if I undo it
or if you want you can also individually
click on them and that red X is showing
that it will be removed that means me it
will be deleted and press Enter
so those object will be edits then
suppose I want to create a line in some
angle specified angle then again I will
take the line command give the first
point then to make it insolent
here to make this ortho mode of so click
on that
so for inclined line you will have to
use the length and the angle so for
length I will give suppose 50 then for
angle here to press tab button on the
keyboard and give the angle so angle how
you have to specify the angle so X will
be 0 degree Y will be 90 degree and
minus X will be 180 degree so in that
way you will have to specify the angle
suppose if I want to go in between here
so I will have to specify 30 degree
then here 60 degree 90 degree 120 150 so
in this way you will have to specify the
angle and same is the case below also if
I want to go below here also I will have
to space
thirty degree then ninety degree 12150
so on the both sides you will have to
specify the zero to 180 180 degree angle
so on the both side angle will be same
then your line will be drawn on the side
on which side your cursor is on that
side your line will be drawn suppose ah
from here I want to create a line of 30
degree so I will give you 30 press enter
so a line of 30 degrees created so from
here I want to go on this side again
give the length then press tab button
then suppose from this 90 I want to go
ahead by 30 degree on left side so I
will have to specify the angle from X
x-axis so the total angle will be 90
plus 30 that is 120 degree press Enter
if I go down it will automatically
measure from the in the mod of bottom
area down area so here also I will
specify the length then press tab then
angle suppose from this y-axis I want to
come down by 30 degree and the total
angle is 180 degree so the angle I will
have to specify from x axis so that will
be 180 minus 30 degree that is 150
degree press ENTER and to connect you
can click on this close button so it
will be connected and if you don't want
this XY by XY axis in between when you
are working so for that you will have to
you you seeis UCS I command UCS icon
press ENTER and click on this no region
so it will remain on the left side it
will not come in between so we can here
is it
click the processing window and remove
it so this highlighted area is the new
feature of AutoCAD 2015 so it will
highlight in blue color which objects
has been selected so previously it was
showing in dotted line actually hidden
line now it is relating presenter to
come up suppose I have one line here I
make make it straight
by pressing f8 button on keyboard you
can draw a line with free and also
without giving any length or taking the
length water length it is showing you
press ENTER again enter you can repeat
the command by pressing enter button use
the first point second point enter to
come out we can also press spacebar as a
for enter 2 so in AutoCAD a spacebar
also work as a enter button
so suppose I want to create one line
from end point of this cursor so if you
take your cursor there it will show you
end point automatically so this end
point is called as object snaps so it
helps you in creating the object
accurately so for this object snaps to
work properly you will have to keep this
object snap on actually so here it is on
right now if you click on it it will
become of object snap off then it will
not show you though any object snap so
if at your end it is not showing then
you you will have to make it on so click
on it but you can also press the f3
button on the keyboard
so from end point it will create it
accurately from it again I will press F
it to make the object snap off again
here end point if you take your cursor
if you want the midpoint it is not
showing the midpoint so you in two ways
you can do it you can directly put the
shift button and right click and from
here you can choose them me to find
object snap so if you want the midpoint
second time you will have to do the same
way suppose I will click here and if I
take my cursor there it will show the
midpoint this is the one way other way
is automatic suppose I will undo to show
the midpoint automatically you will have
to click on this arrow after the object
snap button and then click on this
midpoint so it will excelle it will
consider it for automatic selection so
now if I take my
it will automatically show the midpoint
again in point end point now here it is
showing the midpoint but I don't want to
connect it to midpoint II but I want
this line to be perpendicular to this
line so if it is showing object snap
which is not required by us if we want
perpendicularly he showing midpoint then
you can choose the different object snap
by Shift + right click hold the shift
button and right click and from here you
can choose the perpendicular and click
on the line and say me if you want
perpendicular again and again then you
can come here you can click on
perpendicular so it will also come
automatically here it is showing the
perpendicular automatically if you want
to come come out of the line command
without using close button then we just
have to press Enter button so you can
come out by pressing the enter button
from line commands so whatever we are
learn obtain now based on that we will
create one object so suppose we want to
create this object so we will take the
limit at first we will have to use the
limit command so the limit for this
drawing will be 30 20 25 75 so 100 by
100 will be the limit for this drawing
so at first we will start neutering so
click on this new tab and click on this
start ring then give the limits command
for that you li m enter then lower left
corner will be 0 comma 0 enter an upper
right corner will be 100 comma hundred
then press ENTER again then give zoom
all red enter enter to apply the limits
then take the line come at Q the first
point now I want the line to be straight
so I will make the ortho mode on then
give the length of the line so length is
75
enter then take your cursor up then next
length will be 20 15 30 is 65 again take
your cursor up give the length of 65
then on the left side length is 25 and
30 so again we will take it on the left
side and we will give length of 25 enter
take it down give the height of 30 enter
then 2015 30 20 then 20 then 50 take
your cursor on the side then 30 and you
can use the close button so in this way
this object is created so to create the
next object with suppose angle line I
want to create this object with angle
line so for this again I will have to
decide the limits so I will 30 20 30 20
30 1941 40 suppose I will take it 180
180 so again I will start new ring new
tab start right limits
enter zero comma zero enter then 180
comma one it enter then zoom all Z enter
a enter and take the line command give
the first point suppose I will
start from any point suppose I will
start from this point but I will start
from this point so at first I will have
to create a line info line line so I
will take line command give the first
point then at first I will have to give
the length length is 30 then tab then
angle from x-axis I will have to specify
the angle so in this case if this line I
am creating so if I create one
horizontal line that will be the x-axis
so the angle will be half of this so 30
degree so I will give the 30 enter then
make our Thorn give the 20 again go on
right 20 again make ortho off again
length is 30 tab angle now from here I
will have to specify the angle so from
this horizontal line I will have to
specify this angle so I know from this
vertical line this horizontal line 30
degree that means from this vertical
line it will be 30 degree that means the
total is 90 degree that means this angle
will be 60 degree so I will give you 60
enter again then 30 tab so this angle
will be again this we
sixty-degree again because the angle
between these two line is 60 that means
from vertical it is 30 so it will be 60
I can make our own we can also we can
length tab so from x axis angle will be
30 degree I can take on this side length
is 30 tab angle again the angle between
these two line is 60 degree so from
horizontal line it will be 30 that means
the remaining will be 150 degree so I
will give you 150 again also on stick it
up 20 length again on this side 20 again
or 12 again length I hit tab angle again
angle I will have to specify this
horizontal line so it will be from this
horizontal line I need the angle so from
this vertical we know it is 30 so that
means 90 plus 30 is 120 X will give the
lip angle of 120 begin on this side line
38 tab angle will be again 30 plus 90
plus 30 will be 120 T so you know you
can use this tacking also so you can
give length 20 again make also on length
of 20 and then close it here so in this
way this object is also created so thank
you we will stop