AutoCAD Arc Command Tutorial Complete Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

welcome back in this tutorial we will
try to cover all the options available
in our command
so first option is three-point arc so it
will create arc passing through three
points suppose I have a triangle suppose
I want to create our passing through
these three points so I can click on it
three point give the first point second
point and third point
so in this way it will create our
passing through three points so you can
take any three points suppose I will
take this first point this does the
second point and this has a third then
next option is start center end so you
can create arc using start point center
point I'd input suppose I have some
shape here suppose I want to create one
arc like this so while creating this arc
you have to remember that your arc is
great always created in anti-clockwise
direction so as per that you you have to
decide your start point if I want to
create at like this so this will be my
start point so I will give start center
end so at first you will have to give
the start point then Center Point and
then the end point and if you give the
reverse if you use this as a start point
and this as the in print in arc will be
created from outside suppose we just try
that also suppose start Center in start
point center point and end point if you
want from outside so as for that you
have to decide your start point then
next option aides start Center and angle
suppose I do some start point here then
my center point is here and then you you
have to you suppose I will make Arthur
off you have to give the angle suppose I
give it to be 120 degree so this 120
degree is actually the included angle
that means if we create one line suppose
end of this to the center point and from
center point off to end of this so the
angle between these two lines will be
the 120 degree if suppose we try to give
the dimension angular first line second
line location so these are angle is 120
degree so the angle is actually included
angle this is called as employee angle
so using that angle start on the end
point also you can create the arc so
length is next is using length so here
you you will have to view chord length
so if you take this start center length
so at first you will have to give the
start point then you will have to use
some center point and then you have to
specify the chord length suppose I
specifies the coeur d'alene to be 10
that means actually if we check which is
the 10 dimension using a line so from
this point to this point the distance
will be 10 distance so in this way you
can create a arc using chord length also
then next stage then next start end and
angle so it will be the same only the
data given is different and you can also
create using Direction also so direction
will be tangent to the first point if we
create like start and end direction this
can be used for actually creating slot
also suppose I have one line here and I
copy this line suppose I want to create
here one arc so I can create it using
this start and end direction so as I
have to create art like this so arcs
creates in anti-clockwise direction so
this will be the start point then I will
have to give the end point then I will
have to give the angle so if I give the
angle of 0 so my circle will be created
vertical so this option can be used very
easily to create a slot like this so was
i create opposite also start and then
now in this case that that angle will be
180 degree so in this way you can use
this command to create slot using angle
using Direction actually then start and
end radius so using this also you can
create it so this command is also useful
to create a slot also suppose again I
create some object suppose I copy this
object at a distance of 4 so my radius
will be 2.5 so here I can say that start
end and radius give the start point give
the end point and radius will be 2.5 so
in this fails this command also useful
for kid creating the slot that is you
specify the start and end radius so here
the same only same as like this only
sequence is change so all this others
are same and the continuous it will
continue from the last arc suppose if I
create some mark here and if I click on
the continue so it will automatically
continue from the last arc if I again
take the continue
so it will continue from the imprint of
the last arc so in this way you can
create the arc using continue so in this
way you can use the arc command to
create different types of objects so
thanks for giving we will stop