AutoCAD Construction Line (Xline) and Ray Command Tutorial Complete | Hor; Ver; Ang; Bisect; Offset Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn:about
construction line and array click on the
draw we here is the construction line so
construction line is basically useful to
create a reference lines you can also
use these lines as a projection lines
when you create one view using
construction line you can create other
views so this is a infinite length lines
and that's it these lines extend to
infinity so to create this line click on
construction line then there are
different options are here if you want
to create horizontal construction line
click on hot so it will create
horizontal construction line as many as
you want and again we will go for
construction line if you want to create
vertical click on the vertical so you
can create at a position you want then
angle if you want to create in some
angle then give the angle how much angle
suppose I want to pay it in 45 degree so
you can create in the desired angle then
next option is bisect it will bisect the
angle so click on the bisect suppose I
want to bisect this angle so give the
first point give the second point and
give the Third Point specifying the
angle so it will bisect that angle
so in this way you can create a line
bisecting angle then offset suppose I
have one line and I want to create
opposite to this and I want the opposite
line to be a construction line so for
that click on construction line click on
offset and give the distance suppose Phi
U and select the line select the side so
it will create a construction line from
simple line and you can use in a
construction line like this also
directly you can use it without
specifying whether you want horizontal
vertical or in angle click the first
point make ortho on give the horizontal
point I can give the vertical point and
press escape to come out in this way you
can create a construction line then one
more command is the Ray so ray is like
construction line only but it is
infinite in one direction so it will
create the lines in one direction and if
you make the ortho off so that is the
only difference between construction
line construction line is infinite on
both sides and Ray's infinite one one
day one direction so this one we will
stop