AutoCAD 3D Cone Command Tutorial Complete | Frustum of Cone; Axis Endpoint; Top Radius; Elliptical Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn:about
cone command we will see how to create
corn in 3d to switch to 3d click on this
gear icon click on 3d modeling then
select here is a symmetry so that it
will show the z axis give the UCS icon
enter no region so it will ship the icon
here is the cone command give the cone
then specify the center point of the
cone where you want to create it then
give the base radius how much you want 3
enter then give the height of the cone
suppose it is 5 then to weave it in
shaded mode click here and select this
shaded begin cone then give the center
point if you want to create a cone base
circle with diameter click here give the
diameter then if you want to change the
axis click on this axis end point then
give the length how much length you want
for the cone suppose 10 and you can also
specify the angle to specify the angle
press tab button on the keyboard and
give the angle again cone give the
center point then give the radius then
you can also create a system of cone to
create a frustum of cone click on this
top radius how much you want
suppose I want it to be to enter then
give the direction on which direction
you want create the and give the height
if you want to edit the cone object
click on it if you want to change the
bottom radius click on this arrow and
drag the mouse here you can give the
increment in radius by how much amount
you want to increment the radius that
you can specify here by 2 unit and if
you want to use the total radius of the
cone click on this arrow to specify the
total delious of the cone press tab
button and here you can specify the
required total radius how much you
same way you can change the radius at
the top also total radius and increment
radius and by clicking on this arrow you
can change the height of the cone how
much you want and to specify the total
I'd press the tab button and give the
total light I want to create a cone
passing through these three midpoint
click on coal and select 3 P and give
the three-point milled off this middle
of this and made of this then give the
direction and I eat how much you want it
will create the cone with that parameter
if you want to create cone passing
through two points then click on bone
click on 2 P then give the first point
here the second point and if you want to
specify the height of the cone from
other object then click on these two
points I want to define it as per this
cone take this Center and take this 4
per point it will create the cone with
the same height of this end cone and
there is DTR is there that is tangent to
two circles and of defined radius
suppose I want to create a cone tangent
to these two cones click on tenth and
radius you take care that 3d objects
nappies or if it is not off it will show
the center point actually and it will
not take the tangent point to make the
3d object snap off race f4 button on the
keyboard and then give the tangent point
tangent to this and tangent to this then
give the radius how much you want
suppose I want 15 radians
enter and then give the height of the
cone I want it it will create cone touch
II to other cone or any circular object
and of your desire radius and height
again cone then you can create a cone
with elliptical base also click on
elliptical then click on center point
give the center of the ellipse then make
the ortho on and give the direction and
give the radius in that direction the
radius is supposed to give the radius in
other direction it is for you then give
the height of the
and if you want to give color to any
object just double-click and select the
color that's all thanks for watching we
will stop here