AutoCAD 3D Sphere Command Tutorial Complete | Half Sphere; Diameter; Tan Tan Radius; 3 Points Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn how to
create sphere at first switch to 3d
modeling click on this gear icon select
3d modeling click on this unsaved view
select SSO matrix give UCS icon enter no
region then from here select shaded mode
click here here is the sphere command
click on sphere give the center point
where you want to create the sphere then
give the radius how much you want
against fear if the centerpoint if you
want to create sphere using diameter
click on diameter option and give the
diameter then sphere next option is
repeat the sphere passing through three
points for this I will create one queue
make ortho q Bob for you says I want to
create a sphere passing through this the
midpoint click on sphere then select on
drippy you the first midpoint second
midpoint and 30 midpoint again spear to
piece for to create sphere passing
through two points click on 2p you the
first point give the second point
against fear the next is 10/10 radius if
you want to create a sphere touching to
circular object I will create two
circular object I will create one
cylinder and one cone
give the Centrepointe radius and height
I want to create a sphere touching this
cylinder and cone click on sphere select
10th and earlier then here your 3d
object snap should be off if it is on it
will show the center point and not the
tangent point to make it up press f4
button on keyboard then select the
tangent point first tangent point second
tangent point then give the radius in
this way you can create a sphere
touching two cylindrical objects then if
you want to create a half sphere suppose
I want to run this fear into a half
sphere for that select this cylinder
then give the center point then give a
radius bigger than the sphere then click
on this axis endpoint and give the
direction one we said you want to cut
suppose I want to cut on this side give
their depth then subtract it click on
solid subtract select object to subtract
from enter select object to subtract
enter in this way you can create a half
sphere then to use the color double
click and select the color
and press escape to come out that's all
thanks for watching we will stop here