AutoCAD 3D Revolve Command Tutorial Complete | Options covered Solid; Surface; X; Y; Z; Object Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn about the
wall command to switch to 3d modeling
click here and select 3d modeling then
click on unsaved review SC isometric and
give the UCS icon command UCS icon enter
choose no region option and click here
on 2d wireframe and select shaded with
edges for revolve command at first you
will have to create the profile which
you want to revolve the profile needs to
be connected you can create it using
polyline command you can also create it
using line command if you create it by
line command you will have to join it
using join command we will create one
profile using line command make the
earth own give the dimensions and create
your profile you want to revolve enter
then to connect it click on modify and
select the join command and select all
the object enter all the objects are
connected press escape then for the wall
command you will also need a axis around
which you want to revolve this shape
that also you can create using line
command click on the line command then
drag the point now this distance will
depend on the radius of the hole which
will be created up the revolve command
based on that this distance will be
different suppose I want this distance
to be 4 give the 4 enter and create one
axis around which you want to revolve
then enter then to use the Raval comment
from keyboard type re V inter and select
object to revolve this profile then
enter then you will have to specify axis
start point I want with a revolve around
this axis give the start point give the
end point
then give angle by which you want to
revolve it suppose I want to revolve it
right 180 degree give the 180 degree and
in this way this profile is revolved
around this axis by that angle make the
grid mode off we'll just undo it you can
give the wall command from here click on
the arrow below the extrude command and
select or you all
then select the object enter and if you
give the start point in the reverse
direction it will be reward in the
reverse direction if I give this as a
start point and this as a end point then
it will be reward in other direction and
if you want to create a complete full
circle give the 360 degree then you can
use other option also for specifying the
axis click on rial select the object
enter then you can also revolve around x
axis now this is the x axis it will be
revolved around this if we take the x
axis it will be reward around x axis and
give the angle now it is the world by
considering this axis passing through
the center of Revolt object same way you
can revolve around y axis also if we
again take it Raval select the object
enter and give the y axis then it will
revolve around this green y axis and
this gap between y axis and the line
will be taken as a radius of the
internal circle and you can give the
angle same way you can also revolve
around z axis to ryeol around z axis you
will have to create object on vertical
plane to create object or vertical plane
click here and select right or front
plane suppose i want to create on this X
Z then click on this front plane then
create your object you want to revolve
suppose I want to revolve circle
create the circular object then go back
to world click on this world and again
use the Raval come on reborn
select object to the wall enter then
click on this z axis so it will be
revolved around the z axis and give the
angle the wall shrek the object then
using this mode option you can choose
whether you want to create a solid
object or surface object can also
specify an object as a axis of
revolution click on this object and
click on this object that you want to
define as a axis of revolution and then
give the angle by which you want to
leave all that's all thanks for watching
we will stop here