All Courses
Explore Courses UPSC Exam UPSC Test Series Free Notes EduRev Infinity Get the App Login Join for Free
Sign in Open App
Class 11 Exam  >  Class 11 Questions  >  A body is moving with uniform velocity of 2 m... Start Learning for Free
SaveJoin the Discussion on the App
A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is 10 N. If the body moves with velocity 4 m/s, the force of friction will be 
  • a)
    2.5 N  
  • b)
    5 N 
  • c)
    10 N  
  • d)
    20 N
Correct answer is option 'C'. Can you explain this answer?
FREE This question is part of
Download PDF Attempt Test
Download PDF Attempt this Test
Verified Answer
A body is moving with uniform velocity of 2 m/s on a rough level surfa...
Kinetic friction is constant, hence frictional force will remain same (= 10 N). 
View all questions of this test
Most Upvoted Answer
A body is moving with uniform velocity of 2 m/s on a rough level surfa...
Frictional Force on a Body Moving with Uniform Velocity

- When a body is moving with a uniform velocity on a rough level surface, the frictional force acting on it is equal to the product of the coefficient of friction (μ) and the normal force (N).

Frictional Force = μN

- In this case, the velocity of the body is given as 2 m/s and the frictional force is given as 10 N. We need to find the frictional force when the velocity of the body is 4 m/s.

Using the formula for frictional force, we have:

10 N = μN (equation 1)

- Now, let's consider the situation when the body moves with a velocity of 4 m/s. Since the velocity has increased, the frictional force will also increase.

- The normal force acting on the body remains the same, as the body is still on the same rough level surface. Therefore, the normal force can be considered constant.

- Let's assume the new frictional force is F (to be determined).

Using the formula for frictional force, we have:

F = μN (equation 2)

- We can compare equations 1 and 2 to find the relationship between the frictional force and the velocity of the body.

Since the normal force is constant, we can cancel it out from both equations:

10 N = μN
F = μN

- Now, let's compare the velocities:

2 m/s ≠ 4 m/s

- From this comparison, we can conclude that the frictional force is not directly proportional to the velocity of the body.

- Therefore, we cannot directly use the given frictional force of 10 N to find the frictional force when the velocity is 4 m/s.

- Hence, without any additional information or assumptions about the coefficient of friction, we cannot determine the exact value of the frictional force when the velocity of the body is 4 m/s.

- Therefore, the correct answer cannot be determined and none of the given options (a, b, c, d) are correct.
Attention Class 11 Students!
To make sure you are not studying endlessly, EduRev has designed Class 11 study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Class 11.
< Previous Question Next Question >
Explore Courses for Class 11 exam

Similar Class 11 Doubts

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. The most efficient form of damping is

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. In Fluid Friction Damping the amount of damping torque

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. When the moving system of a measuring instrument moves rapidly but smoothly to its final steady position, the instrument is said to be

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. Damping is required to be provided to the moving part of measuring instrument

Top Courses for Class 11View all

Top Courses for Class 11

A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer?
Question Description
A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? for Class 11 2024 is part of Class 11 preparation. The Question and answers have been prepared according to the Class 11 exam syllabus. Information about A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? covers all topics & solutions for Class 11 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer?.
Solutions for A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? in English & in Hindi are available as part of our courses for Class 11. Download more important topics, notes, lectures and mock test series for Class 11 Exam by signing up for free.
Here you can find the meaning of A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer?, a detailed solution for A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? has been provided alongside types of A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice A body is moving with uniform velocity of 2 m/s on a rough level surface. The frictional force on it is10 N. If the body moves with velocity 4 m/s, the force of friction will bea)2.5 N b)5 Nc)10 N d)20 NCorrect answer is option 'C'. Can you explain this answer? tests, examples and also practice Class 11 tests.
Explore Courses for Class 11 exam

Top Courses for Class 11

Explore Courses

Suggested Free Tests

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Get App
© EduRev
Education Revolution
Signup to see your scores go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup