Class 11 Exam  >  Class 11 Questions  >  A body of mass 100Kg is moving with a velocit... Start Learning for Free
A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.?
Most Upvoted Answer
A body of mass 100Kg is moving with a velocity 1m/s the frictional for...
Given:
- Mass of the body, m = 100 Kg
- Initial velocity, u = 1 m/s
- Frictional force, f = 5 kg wt = 5 x 9.8 N (1 kg wt = 9.8 N)
- Applied force, F = 50 N
- Time, t = 60 s

To find:
- Final velocity, v

Solution:
1. We know that the net force acting on the body is given by:
F_net = F_applied - F_friction

2. Using the above formula, we can find the net force acting on the body:
F_net = 50 N - 5 x 9.8 N = 0.2 N

3. We can now use the formula for acceleration:
a = F_net / m

4. Substituting the values, we get:
a = 0.2 N / 100 Kg = 0.002 m/s^2

5. We can now use the formula for velocity:
v = u + at

6. Substituting the values, we get:
v = 1 m/s + 0.002 m/s^2 x 60 s = 1.12 m/s

7. Hence, the final velocity of the body after one minute is 1.12 m/s, which is approximately equal to 1.6 m/s (option 3).

Therefore, the answer is option '3'.
Attention Class 11 Students!
To make sure you are not studying endlessly, EduRev has designed Class 11 study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Class 11.
Explore Courses for Class 11 exam

Similar Class 11 Doubts

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. The most efficient form of damping is

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. In Fluid Friction Damping the amount of damping torque

Attempt All sub parts from each question.Damping: When an analog instrument is used to measure a physical parameter, a deflecting torque is applied to the moving system which is deflected from its initial position and should move steadily to the deflected position. But due to inertia, the moving system keeps on oscillating about equilibrium. To remove the oscillation of the moving system a damping torque is required. The damping torque should be of such that the pointer quickly comes to its final steady position, without overshooting. If the instrument is underdamped, the moving system will oscillate about the final steady position with a decreasing amplitude and will take some time before it comes to rest. When the moving system moves rapidly but smoothly to its final steady position, the instrument is said to be critically damped or deadbeat. If the damping torque is more than what is required for critical damping, the instrument is said to be overdamped. In an overdamped instrument, the moving system moves slowly to its final steady position in a lethargic fashion.Methods of producing damping torque:(i) Air friction damping(ii) Fluid friction damping(iii) Eddy current dampingAir Friction Damping: A light piston is attached to the moving system. This piston moves in an air chamber closed at one end. When there is an oscillation, the piston moves in and out of the chamber. When the piston moves into the chamber, the air inside is compressed and an air pressure is built up which opposes the motion of the piston and thus the moving system faces a damping torque which ultimately reduces the oscillation. Fluid Friction Damping: In this type of damping oil is used in place of air. Viscosity of the oil being greater, the damping torque is also more. A disc is attached to the moving system which is completely dipped into the oil. When the moving system oscillates, the disc moves in oil and a frictional drag is produced. This frictional drag opposes the oscillation. Eddy Current Damping: The moving system is connected to an aluminium disc which rotates in a magnetic field. Rotation in magnetic field induces an emf in it and if the path is closed, a current (known as eddy current) flows. This current interacts with the magnetic field to produce an electromagnetic torque which opposes the motion. This torque is proportional to the oscillation of the moving system. This electromagnetic torque ultimately reduces the oscillation. Air friction damping provides a very simple and cheap method of damping. The disadvantages of fluid friction damping are that it can be used only for instruments which are in vertical position. Eddy current damping is the most efficient form of damping.Q. When the moving system of a measuring instrument moves rapidly but smoothly to its final steady position, the instrument is said to be

Top Courses for Class 11

A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.?
Question Description
A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? for Class 11 2024 is part of Class 11 preparation. The Question and answers have been prepared according to the Class 11 exam syllabus. Information about A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? covers all topics & solutions for Class 11 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.?.
Solutions for A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? in English & in Hindi are available as part of our courses for Class 11. Download more important topics, notes, lectures and mock test series for Class 11 Exam by signing up for free.
Here you can find the meaning of A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? defined & explained in the simplest way possible. Besides giving the explanation of A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.?, a detailed solution for A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? has been provided alongside types of A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? theory, EduRev gives you an ample number of questions to practice A body of mass 100Kg is moving with a velocity 1m/s the frictional force offered by the surface is 5kg wt.If the body is pushed by a force of 50N for one minute , velocity of the body after one minute is 1) 0.16m/s 2) 16m/s 3) 1.6m/s 4) 3.2m/s answer is option '3'.can you explain.? tests, examples and also practice Class 11 tests.
Explore Courses for Class 11 exam

Top Courses for Class 11

Explore Courses
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev