Electronics and Communication Engineering (ECE) Exam > Electronics and Communication Engineering (ECE) Questions > Consider a sine wave of frequency 2 KHz and p...
Start Learning for Free
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power that
may be transmitted without slopeoverload distortion?
may be transmitted without slopeoverload distortion?
- a)100 W
- b)50 W
- c)150 W
- d)200 W
Correct answer is option 'B'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This si...
Most Upvoted Answer
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This si...
Solution:
Given parameters:
Frequency of sine wave, f = 2 kHz
Peak amplitude, A = AM
Step size, Δ = 0.4 V
Sampling period, T = 3.18 x 10^-6 sec
To avoid slope overload distortion, the step size must be less than or equal to the maximum slope of the input signal. The maximum slope of a sine wave is at its zero crossings and is given by:
dV/dt = 2πfA
Substituting the given values, we get:
dV/dt = 2π x 2 x 10^3 x AM
To avoid slope overload distortion, we must have:
Δ ≤ dV/dt x T
Substituting the given values, we get:
0.4 ≤ 2π x 2 x 10^3 x AM x 3.18 x 10^-6
Solving for AM, we get:
AM ≤ 31.83 V
The power of the signal is given by:
P = (AM/√2)^2/R
where R is the load resistance.
The maximum power that may be transmitted without slope overload distortion is obtained by substituting the maximum value of AM:
Pmax = (31.83/√2)^2/R = 50 W
Therefore, the correct answer is option B (50 W).
Given parameters:
Frequency of sine wave, f = 2 kHz
Peak amplitude, A = AM
Step size, Δ = 0.4 V
Sampling period, T = 3.18 x 10^-6 sec
To avoid slope overload distortion, the step size must be less than or equal to the maximum slope of the input signal. The maximum slope of a sine wave is at its zero crossings and is given by:
dV/dt = 2πfA
Substituting the given values, we get:
dV/dt = 2π x 2 x 10^3 x AM
To avoid slope overload distortion, we must have:
Δ ≤ dV/dt x T
Substituting the given values, we get:
0.4 ≤ 2π x 2 x 10^3 x AM x 3.18 x 10^-6
Solving for AM, we get:
AM ≤ 31.83 V
The power of the signal is given by:
P = (AM/√2)^2/R
where R is the load resistance.
The maximum power that may be transmitted without slope overload distortion is obtained by substituting the maximum value of AM:
Pmax = (31.83/√2)^2/R = 50 W
Therefore, the correct answer is option B (50 W).
Attention Electronics and Communication Engineering (ECE) Students!
To make sure you are not studying endlessly, EduRev has designed Electronics and Communication Engineering (ECE) study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Electronics and Communication Engineering (ECE).
|
Explore Courses for Electronics and Communication Engineering (ECE) exam
|
|
Top Courses for Electronics and Communication Engineering (ECE)View all
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer?
Question Description
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? for Electronics and Communication Engineering (ECE) 2024 is part of Electronics and Communication Engineering (ECE) preparation. The Question and answers have been prepared according to the Electronics and Communication Engineering (ECE) exam syllabus. Information about Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? covers all topics & solutions for Electronics and Communication Engineering (ECE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer?.
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? for Electronics and Communication Engineering (ECE) 2024 is part of Electronics and Communication Engineering (ECE) preparation. The Question and answers have been prepared according to the Electronics and Communication Engineering (ECE) exam syllabus. Information about Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? covers all topics & solutions for Electronics and Communication Engineering (ECE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer?.
Solutions for Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? in English & in Hindi are available as part of our courses for Electronics and Communication Engineering (ECE).
Download more important topics, notes, lectures and mock test series for Electronics and Communication Engineering (ECE) Exam by signing up for free.
Here you can find the meaning of Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer?, a detailed solution for Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? has been provided alongside types of Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice Consider a sine wave of frequency 2 KHz and peak amplitude AM. This signal is applied to a delta modulator of step-size 0.4 Volt and sampling period 3.18 x 10-6 sec. What is the maximum power thatmay be transmitted without slopeoverload distortion?a)100 Wb)50 Wc)150 Wd)200 WCorrect answer is option 'B'. Can you explain this answer? tests, examples and also practice Electronics and Communication Engineering (ECE) tests.
|
|
Explore Courses for Electronics and Communication Engineering (ECE) exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
x
![]()
Best way to Prepare for Electronics and Communication Engineering (ECE)
Learn | Test | Discuss | Repeat
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up
within 7 days!
within 7 days!
Takes less than 10 seconds to signup