A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103andOmega;b)25000 andOmega;c)5 x 102andOmega;d)5 x 104andOmega;Correct answer is option 'A'. Can you explain this answer?

EduRev

All Courses

Explore Courses UPSC Exam UPSC Test Series Free Notes EduRev Infinity

Open App

Class 12 Exam > Class 12 Questions > A carbon resistor is marked in green, red, an...

A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor is

a)
52 x 10³Ω
b)
25000 Ω
c)
5 x 10² Ω
d)
5 x 10⁴ Ω

Correct answer is option 'A'. Can you explain this answer?

Join for Free

Join for Free

Most Upvoted Answer

A carbon resistor is marked in green, red, and orange bands. The appro...

To determine the resistance of a carbon resistor based on the color bands, we need to refer to the standard resistor color code. The colors represent digits and multipliers as follows:

Green: 5

Red: 2

Orange: Multiplier of 10^3 (1,000)

Given the color bands: Green, Red, Orange

The resistance value is calculated as follows:

First digit: Green = 5

Second digit: Red = 2

Multiplier: Orange = 10^3 (1,000)

So the resistance is:

Resistance=(52)×10^3 ohms=52,000 ohms=52 kilo-ohms

Answer: The approximate resistance of the resistor is 52 kΩ.

Free Test

FREE

Test: Drift Velocity & Resistivity of Electrons
20 Ques | 20 Min

Start Free Test

View all free Class 12 tests

Community Answer

A carbon resistor is marked in green, red, and orange bands. The appro...

The colour code of green =5,red=2,orange is 10^-3 ohms.
The Two colour band indicate the significant no and the third colours band indicate decimal multiplier .
Thus we get 52 ×10^-3 ohm.

View all answers Start learning for free

Explore Courses for Class 12 exam

Similar Class 12 Doubts

Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrom e) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.In carbon composition resistors, __ the ratio of carbon, _ the overall resistance.

View answer

Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrom e) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.Wirewound Resistors are made by winding a thin _ or similar wire on an former in the form of a spiral helix.

View answer

‘X’ is a type of commercial resistor made from a mixture of clay, carbon black, and resin binder which are pressed and then molded into cylindrical rods by heating. Identify X.

View answer

Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrom e) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.Carbon composition resistors are made from a mixture of

View answer

Read the following text and answer the following questions on the basis of the same:Types of resistors Most common type of resistor is Carbon Composition Resistors. Carbon resistors are a cheap, general purpose resistor used in electrical and electronic circuits. Their resistive element is manufactured from a mixture of finely ground carbon dust or graphite and a non-conducting ceramic powder to bind it all together. The ratio of carbon dust to ceramic (conductor to insulator) determines the resistive value of the resistor. Higher the ratio of carbon, lower the overall resistance. Film Type Resistors consist of Metal Film, Carbon Film and Metal Oxide Film .Such resistors are generally made by depositing pure metals, such as nickel, or an oxide film, such as tin-oxide, on an insulating ceramic rod or substrate. The resistive value of the resistor is controlled by increasing the desired thickness of the deposited film giving them the names of either “thick-film resistors” or “thin-film resistors”. Film type resistors can achieve much higher ohmic value compared to other types. Another type of resistor, called a Wirewound Resistor, is made by winding a thin metal alloy wire (Nichrom e) or similar wire on an insulating ceramic former in the form of a spiral helix. These types of resistors are generally only available in very low ohmic value with high precision . They are able to handle much higher electrical currents than other resistors of the same ohmic value with much excessive power ratings. These high power resistors are moulded into an aluminium heat sink body with fins attached to increase their overall surface area to promote heat loss and cooling.Metal Film Type Resistors are generally made by depositing pure , on rod or substrate.

View answer

A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer?

Share with a Friend

Answer this doubt

Question Description
A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? for Class 12 2025 is part of Class 12 preparation. The Question and answers have been prepared according to the Class 12 exam syllabus. Information about A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Class 12 2025 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer?.

Solutions for A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? in English & in Hindi are available as part of our courses for Class 12. Download more important topics, notes, lectures and mock test series for Class 12 Exam by signing up for free.

Here you can find the meaning of A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer?, a detailed solution for A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? has been provided alongside types of A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice A carbon resistor is marked in green, red, and orange bands. The approximate resistance of the resistor isa)52 x 103Ωb)25000 Ωc)5 x 102Ωd)5 x 104ΩCorrect answer is option 'A'. Can you explain this answer? tests, examples and also practice Class 12 tests.

Explore Courses for Class 12 exam