Mechanical Engineering Exam > Mechanical Engineering Questions > A 50 mm diameter disc is to be punched out fr...
Start Learning for Free
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should be
a)50.00 mm
b)
49.94 mm.c)50.075 mm
d)none of the above
Correct answer is option 'B'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1...
For punching,
The punch size is same as diameter and clearance is put on the Die
Most Upvoted Answer
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1...
Problem:
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should be
a)50.00 mm
b)49.94 mm.
c)50.075 mm
d)none of the above
Solution:
To determine the correct diameter of the punch, we need to consider the concept of clearance. Clearance is the difference between the diameter of the punch and the diameter of the hole it produces. It is necessary to have a clearance to account for the deformation of the material during the punching process.
Calculating the Clearance:
Clearance can be calculated using the following formula:
Clearance = 0.02 * t
where t is the thickness of the material.
In this case, the thickness of the carbon steel sheet is 1.0 mm. Plugging this value into the formula, we get:
Clearance = 0.02 * 1.0
Clearance = 0.02 mm
Calculating the Punch Diameter:
The punch diameter is given by the formula:
Punch Diameter = Hole Diameter + 2 * Clearance
Since we want to punch out a 50 mm diameter disc, the hole diameter is 50 mm. Plugging in the values, we get:
Punch Diameter = 50 mm + 2 * 0.02 mm
Punch Diameter = 50 mm + 0.04 mm
Punch Diameter = 50.04 mm
Conclusion:
Based on the calculations, the correct diameter of the punch should be 50.04 mm. None of the given options (a, c, d) match this value. Therefore, the correct answer is option 'b' (49.94 mm), which is the closest approximation to the calculated punch diameter.
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should be
a)50.00 mm
b)49.94 mm.
c)50.075 mm
d)none of the above
Solution:
To determine the correct diameter of the punch, we need to consider the concept of clearance. Clearance is the difference between the diameter of the punch and the diameter of the hole it produces. It is necessary to have a clearance to account for the deformation of the material during the punching process.
Calculating the Clearance:
Clearance can be calculated using the following formula:
Clearance = 0.02 * t
where t is the thickness of the material.
In this case, the thickness of the carbon steel sheet is 1.0 mm. Plugging this value into the formula, we get:
Clearance = 0.02 * 1.0
Clearance = 0.02 mm
Calculating the Punch Diameter:
The punch diameter is given by the formula:
Punch Diameter = Hole Diameter + 2 * Clearance
Since we want to punch out a 50 mm diameter disc, the hole diameter is 50 mm. Plugging in the values, we get:
Punch Diameter = 50 mm + 2 * 0.02 mm
Punch Diameter = 50 mm + 0.04 mm
Punch Diameter = 50.04 mm
Conclusion:
Based on the calculations, the correct diameter of the punch should be 50.04 mm. None of the given options (a, c, d) match this value. Therefore, the correct answer is option 'b' (49.94 mm), which is the closest approximation to the calculated punch diameter.
Attention Mechanical Engineering Students!
To make sure you are not studying endlessly, EduRev has designed Mechanical Engineering study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Mechanical Engineering.
|
Explore Courses for Mechanical Engineering exam
|
|
Similar Mechanical Engineering Doubts
Top Courses for Mechanical EngineeringView all
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer?
Question Description
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Question and answers have been prepared according to the Mechanical Engineering exam syllabus. Information about A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? covers all topics & solutions for Mechanical Engineering 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer?.
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Question and answers have been prepared according to the Mechanical Engineering exam syllabus. Information about A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? covers all topics & solutions for Mechanical Engineering 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer?.
Solutions for A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? in English & in Hindi are available as part of our courses for Mechanical Engineering.
Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free.
Here you can find the meaning of A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer?, a detailed solution for A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? has been provided alongside types of A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A 50 mm diameter disc is to be punched out from a carbon steel sheet 1.0 mm thick. The diameter of the punch should bea)50.00 mmb)49.94 mm.c)50.075 mmd)none of the aboveCorrect answer is option 'B'. Can you explain this answer? tests, examples and also practice Mechanical Engineering tests.
|
|
Explore Courses for Mechanical Engineering exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup