Civil Engineering (CE) Exam > Civil Engineering (CE) Questions > In the design of two-way slab restrained at a...
Start Learning for Free
In the design of two-way slab restrained at all edges, torsional reinforcement required is
- a)0.75 times the area of steel provided at midspan in the same directions
- b)0.375 times the area of steel provided at mid-span in the same directions.
- c)0.375 times the area of steel provided nil
- d)nil
Correct answer is option 'A'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
In the design of two-way slab restrained at all edges, torsional reinf...
For restrained slab, the area of reinforcement in each of the four corner layers shall be three-quarters of the area required for the maximum mid span moment in the slab simply supported on both edges meeting at that corner. If the corner contained by edges over only one of which the slab is continuous, torsion reinforcement equal to 0.375 times the area of reinforcement provided the mid-span in the same direction shall be provided. If both edges are continuous, no torsion reinforcement shall be provided.
Most Upvoted Answer
In the design of two-way slab restrained at all edges, torsional reinf...
Torsional Reinforcement in Two-Way Slab
Two-way slabs are structural elements that are used to transfer loads in two directions to the supporting beams or columns. When designing a two-way slab that is restrained at all edges, torsional reinforcement is required to resist the twisting forces that may occur due to the applied loads. The amount of torsional reinforcement required is determined by the following equation:
As = 0.75Ast,mid
Where As is the area of torsional reinforcement required per unit width of the slab, and Ast,mid is the area of steel provided at midspan in the same direction.
Explanation of Answer
Option A is the correct answer because it provides the equation that is used to determine the amount of torsional reinforcement required in a two-way slab that is restrained at all edges. The equation states that the area of torsional reinforcement required is 0.75 times the area of steel provided at midspan in the same direction. This means that the amount of torsional reinforcement required is proportional to the amount of steel provided at midspan, which is the location where the bending moment is maximum in both directions.
Options B, C, and D are incorrect because they either provide a lower value for the amount of torsional reinforcement required or suggest that no torsional reinforcement is required, which is not accurate for a two-way slab that is restrained at all edges.
Conclusion
In conclusion, when designing a two-way slab that is restrained at all edges, it is important to consider the amount of torsional reinforcement required to resist the twisting forces that may occur due to the applied loads. The amount of torsional reinforcement required is proportional to the amount of steel provided at midspan in the same direction and can be determined using the equation As = 0.75Ast,mid.
Two-way slabs are structural elements that are used to transfer loads in two directions to the supporting beams or columns. When designing a two-way slab that is restrained at all edges, torsional reinforcement is required to resist the twisting forces that may occur due to the applied loads. The amount of torsional reinforcement required is determined by the following equation:
As = 0.75Ast,mid
Where As is the area of torsional reinforcement required per unit width of the slab, and Ast,mid is the area of steel provided at midspan in the same direction.
Explanation of Answer
Option A is the correct answer because it provides the equation that is used to determine the amount of torsional reinforcement required in a two-way slab that is restrained at all edges. The equation states that the area of torsional reinforcement required is 0.75 times the area of steel provided at midspan in the same direction. This means that the amount of torsional reinforcement required is proportional to the amount of steel provided at midspan, which is the location where the bending moment is maximum in both directions.
Options B, C, and D are incorrect because they either provide a lower value for the amount of torsional reinforcement required or suggest that no torsional reinforcement is required, which is not accurate for a two-way slab that is restrained at all edges.
Conclusion
In conclusion, when designing a two-way slab that is restrained at all edges, it is important to consider the amount of torsional reinforcement required to resist the twisting forces that may occur due to the applied loads. The amount of torsional reinforcement required is proportional to the amount of steel provided at midspan in the same direction and can be determined using the equation As = 0.75Ast,mid.
Attention Civil Engineering (CE) Students!
To make sure you are not studying endlessly, EduRev has designed Civil Engineering (CE) study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Civil Engineering (CE).
|
Explore Courses for Civil Engineering (CE) exam
|
|
Similar Civil Engineering (CE) Doubts
Top Courses for Civil Engineering (CE)View all
In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer?
Question Description
In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer?.
In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer?.
Solutions for In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? in English & in Hindi are available as part of our courses for Civil Engineering (CE).
Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free.
Here you can find the meaning of In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer?, a detailed solution for In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? has been provided alongside types of In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice In the design of two-way slab restrained at all edges, torsional reinforcement required isa)0.75 times the area of steel provided at midspan in the same directionsb)0.375 times the area of steel provided at mid-span in the same directions.c)0.375 times the area of steel provided nild)nilCorrect answer is option 'A'. Can you explain this answer? tests, examples and also practice Civil Engineering (CE) tests.
|
|
Explore Courses for Civil Engineering (CE) exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup