Class 10 Exam > Class 10 Notes > Class 10 Electricity numerical questions
Class 10 Electricity numerical questions PDF Download
Given below are the Class 10 Science Numerical Questions for electricity
a) Concepts questions
b) Calculation problems
c) Multiple choice questions
d) Long answer questions
e) Fill in the blank's
1) A wire of length 3 m and area of cross-section 1.7X10-6 m2 has a resistance 3X10-2ohm.
a) What is the formula for resistivity of the wire and what is the unit of it
b) Calculate the resistivity of the wire
Ans)
a) Resistivity of the wire is given by
ρ=RAL
And It unit is Ohm-m
b) In this case
L=3 m
A=1.7X10-6 m2
R=3X10-2 ohm
So
ρ=1.7X10-8 Ohm-m
2) The table given below shows the resistivity of three Material X, Y and Z?
a) Arrange the samples in increasing order of conductivity
b) Which of these is best conductor?
c) Which are these is best insulator?
Ans)
a) Conductivity is inversely proportional to resistivity
So
Y< X< Z
b) Z is the best conductor as it has least resistivity
c) Y is the best insulator as it has highest resistivity
3) There are m resistor each of resistance R. First they all are connected in series and equivalent resistance is X. Now they are connected in parallel and equivalent resistance is Y. What is the ratio of X and Y?
Ans)
Series combination
X=R R R …….= mR
Parallel combination
1Y=1R 1R 1R ...=mR
Or Y=R/m
So X : Y=m2 : 1
4) We have four resistors A ,B ,C and D of resistance 4ohm,8ohm ,12 ohm and 24 ohm respectively?
Ans)
Lowest resistance is obtained in parallel combination
1R=14 18 112 124
Or R=2Ω
Highest resistance is obtained in series combination
R=4 8 12 24=48Ω
5) Three resistors 5Ω, 10Ω and 30Ω are connected in parallel with the battery of Voltage 6V?
Ans)
Potential difference remains same across parallel combination
So current in each resistor is calculated as
I1=V/R1=6/5=1.2 A
I2=V/R2=6/10=.6 A
I3=V/R3=6/30=.2 A
Total current in the circuit
I=I1 I2 I3=1.2 .6 .2=2 A
Effective resistance
1R=15 110 130
a) Find the power consumed by the bulb
b) If the electric distribution company changes Rs 5 for 6 KWH, what is the monthly bill for 60 days
Ans) Power of the electrical bulb is given by
P=V X I=.8 A X 250 V= 200 W =.2 KW
Total energy consumption by the bulb in 60 days
E=P X t= .2 X8 X60=96 KWH
So cost will be =5X96/6=80 Rs
7)
A1 ,A2 ,A3 and A are ammeters connected in the circuit
B1 ,B2 and B3 are three identical bulbs
They all are connected to Voltage source as shown in Figure
When the three bulb are working good and glowing ,the current recorded in Ammeter A is 6 A
Answer Following questions
a) Same amount of current will go through each Bulb. And the value is 2 A .True or False
b) If the Bulb B3 is blown away, the bulb B1and B2 will start glowing more. True or False
c) What will happen to all the ammeter reading if Bulb B1 is blown away
d) The current shown in Ammeter A remains even any bulb goes down. True or False
Ans)
a) Since Bulb are identical and connected in parallel with Voltage. Same current will flow through each bulb. Since the total current is 6 A.Individual current will be 2 A
b) If the Bulb B3 is blown away, The potential difference across other bulb still remains same, So same current will flow and they will glow as it is. No change
c) when Bulb B1 goes down, the current in that part become zero.
So reading of Ammeter A1 becomes zero
Reading of Ammeter A2 will remain same i.e. 2 A
Reading of Ammeter A3 will remain same i.e. 2 A
Reading of Ammeter A will be = 2 2=4 A
d) As shown above, the reading of Ammeter A will change
8) Gave the formula for each
Solutions
a) Concepts questions
b) Calculation problems
c) Multiple choice questions
d) Long answer questions
e) Fill in the blank's
1) A wire of length 3 m and area of cross-section 1.7X10-6 m2 has a resistance 3X10-2ohm.
a) What is the formula for resistivity of the wire and what is the unit of it
b) Calculate the resistivity of the wire
Ans)
a) Resistivity of the wire is given by
And It unit is Ohm-m
b) In this case
L=3 m
A=1.7X10-6 m2
R=3X10-2 ohm
So
ρ=1.7X10-8 Ohm-m
2) The table given below shows the resistivity of three Material X, Y and Z?
| Samples | X | Y | Z |
| Resistivity | 3 X10-9 | 11.1 X10-6 | 18X10-17 |
b) Which of these is best conductor?
c) Which are these is best insulator?
Ans)
a) Conductivity is inversely proportional to resistivity
So
Y< X< Z
b) Z is the best conductor as it has least resistivity
c) Y is the best insulator as it has highest resistivity
3) There are m resistor each of resistance R. First they all are connected in series and equivalent resistance is X. Now they are connected in parallel and equivalent resistance is Y. What is the ratio of X and Y?
Ans)
Series combination
X=R R R …….= mR
Parallel combination
Or Y=R/m
So X : Y=m2 : 1
4) We have four resistors A ,B ,C and D of resistance 4ohm,8ohm ,12 ohm and 24 ohm respectively?
| 1 | Lowest resistance which can be obtained by combining these four resistors | |
| 2 | highest resistance which can be obtained by combining these four resistors |
Lowest resistance is obtained in parallel combination
Or R=2Ω
Highest resistance is obtained in series combination
5) Three resistors 5Ω, 10Ω and 30Ω are connected in parallel with the battery of Voltage 6V?
| S.no | Questions | |
| 1 | The value of current across each resistor | |
| 2 | The value of Potential difference across each resistor | |
| 3 | Total current in the circuit | |
| 4 | Effective resistance of the circuit |
Potential difference remains same across parallel combination
So current in each resistor is calculated as
I1=V/R1=6/5=1.2 A
I2=V/R2=6/10=.6 A
I3=V/R3=6/30=.2 A
Total current in the circuit
I=I1 I2 I3=1.2 .6 .2=2 A
Effective resistance
- R= 3Ω
a) Find the power consumed by the bulb
b) If the electric distribution company changes Rs 5 for 6 KWH, what is the monthly bill for 60 days
Ans) Power of the electrical bulb is given by
P=V X I=.8 A X 250 V= 200 W =.2 KW
Total energy consumption by the bulb in 60 days
E=P X t= .2 X8 X60=96 KWH
So cost will be =5X96/6=80 Rs
7)
A1 ,A2 ,A3 and A are ammeters connected in the circuit
B1 ,B2 and B3 are three identical bulbs
They all are connected to Voltage source as shown in Figure
When the three bulb are working good and glowing ,the current recorded in Ammeter A is 6 A
Answer Following questions
a) Same amount of current will go through each Bulb. And the value is 2 A .True or False
b) If the Bulb B3 is blown away, the bulb B1and B2 will start glowing more. True or False
c) What will happen to all the ammeter reading if Bulb B1 is blown away
d) The current shown in Ammeter A remains even any bulb goes down. True or False
Ans)
a) Since Bulb are identical and connected in parallel with Voltage. Same current will flow through each bulb. Since the total current is 6 A.Individual current will be 2 A
b) If the Bulb B3 is blown away, The potential difference across other bulb still remains same, So same current will flow and they will glow as it is. No change
c) when Bulb B1 goes down, the current in that part become zero.
So reading of Ammeter A1 becomes zero
Reading of Ammeter A2 will remain same i.e. 2 A
Reading of Ammeter A3 will remain same i.e. 2 A
Reading of Ammeter A will be = 2 2=4 A
d) As shown above, the reading of Ammeter A will change
8) Gave the formula for each
| 1 | Ohm’s Law | |
| 2 | Resistance in terms of Length,Area,resistivity | |
| 3 | Current in terms of Resistance and Voltage | |
| 4 | Equivalent Resistance for Resistors in Series | |
| 5 | Equivalent Resistance for Resistors in Parallel | |
| 6 | Power produced in the resistance |
| 1 | Ohm’s Law | V=IR |
| 2 | Resistance in terms of Length,Area,resistivity | |
| 3 | Current in terms of Resistance and Voltage | |
| 4 | Equivalent Resistance for Resistors in Series | R=R1 R2 R3….. |
| 5 | Equivalent Resistance for Resistors in Parallel | |
| 6 | Power produced in the resistance | P=I2R |
FAQs on Class 10 Electricity numerical questions
| 1. What is electricity and how does it work? |  |
Ans. Electricity is the flow of electric charge through a conductor. It is caused by the movement of electrons from one atom to another. When a source of energy, such as a battery or a power plant, is connected to a circuit, it creates a potential difference or voltage. This voltage then causes the electrons to move, creating an electric current.
| 2. What are the different units used to measure electricity? | |
Ans. The basic units used to measure electricity are voltage (measured in volts), current (measured in amperes), and resistance (measured in ohms). These units are interconnected through Ohm's law, which states that the current flowing through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance.
| 3. How does a circuit work? | |
Ans. A circuit is a closed loop through which electricity can flow. It typically consists of a power source, such as a battery, wires to carry the electric current, and different components, such as resistors, capacitors, and switches. When the circuit is complete, meaning all components are connected in a continuous path, the electric current can flow, allowing the circuit to work.
| 4. What is the difference between series and parallel circuits? | |
Ans. In a series circuit, the components are connected one after another, forming a single path for the electric current. In this type of circuit, the same current flows through each component, and the voltage is divided among them. In contrast, a parallel circuit has multiple branches, with each component connected to the power source independently. Here, the voltage across each component is the same, but the current is divided among the branches.
| 5. How does resistance affect the flow of electricity in a circuit? | |
Ans. Resistance is a property of a material that opposes the flow of electric current. It can be affected by factors such as the length, cross-sectional area, and temperature of the conductor. The higher the resistance, the more difficult it is for the current to flow. According to Ohm's law, the current in a circuit is inversely proportional to the resistance. Therefore, an increase in resistance leads to a decrease in current flow.
Related Exams
About this Document
|
3.2K Views |
|
4.72/5 Rating |
|
Nov 24, 2024 Last updated |
Document Description: Class 10 Electricity numerical questions for Class 10 2024 is part of Class 10 preparation. The notes and questions for Class 10 Electricity numerical questions have been prepared according to the Class 10 exam syllabus. Information about Class 10 Electricity numerical questions covers topics like and Class 10 Electricity numerical questions Example, for Class 10 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for Class 10 Electricity numerical questions.
Introduction of Class 10 Electricity numerical questions in English is available as part of
our Class 10 preparation & Class 10 Electricity numerical questions in Hindi for Class 10
courses. Download more important topics, notes, lectures and mock test series for Class 10
Exam by signing up for free. Class 10: Class 10 Electricity numerical questions
Description
Full syllabus notes, lecture & questions for Class 10 Electricity numerical questions - Class 10 | Plus excerises question with solution to help you revise complete syllabus | Best notes, free PDF download
Information about Class 10 Electricity numerical questions
In this doc you can find the meaning of Class 10 Electricity numerical questions defined & explained in the simplest way possible.
Besides explaining types of Class 10 Electricity numerical questions theory,
EduRev gives you an ample number of questions to practice Class 10 Electricity numerical questions tests, examples and also practice Class 10 tests.
Download as PDF
|
Explore Courses for Class 10 exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
Class 10 Electricity numerical questions
,ppt
,Summary
,shortcuts and tricks
,Exam
,Extra Questions
,past year papers
,video lectures
,Free
,Class 10 Electricity numerical questions
,Sample Paper
,Objective type Questions
,Class 10 Electricity numerical questions
,study material
,Important questions
,Viva Questions
,MCQs
,practice quizzes
,Semester Notes
,Previous Year Questions with Solutions
,mock tests for examination
;
Additional Information about Class 10 Electricity numerical questions for Class 10 Preparation
Class 10 Electricity numerical questions Free PDF Download
The Class 10 Electricity numerical questions is an invaluable resource that delves deep into the core of the Class 10 exam.
These study notes are curated by experts and cover all the essential topics and concepts, making your preparation more efficient and effective.
With the help of these notes, you can grasp complex subjects quickly, revise important points easily,
and reinforce your understanding of key concepts. The study notes are presented in a concise and easy-to-understand manner,
allowing you to optimize your learning process. Whether you're looking for best-recommended books, sample papers, study material,
or toppers' notes, this PDF has got you covered. Download the Class 10 Electricity numerical questions now and kickstart your journey towards success in the Class 10 exam.
Importance of Class 10 Electricity numerical questions
The importance of Class 10 Electricity numerical questions cannot be overstated, especially for Class 10 aspirants.
This document holds the key to success in the Class 10 exam.
It offers a detailed understanding of the concept, providing invaluable insights into the topic.
By knowing the concepts well in advance, students can plan their preparation effectively.
Utilize this indispensable guide for a well-rounded preparation and achieve your desired results.
Class 10 Electricity numerical questions Notes
Class 10 Electricity numerical questions Notes offer in-depth insights into the specific topic to help you master it with ease.
This comprehensive document covers all aspects related to Class 10 Electricity numerical questions.
It includes detailed information about the exam syllabus, recommended books, and study materials for a well-rounded preparation.
Practice papers and question papers enable you to assess your progress effectively.
Additionally, the paper analysis provides valuable tips for tackling the exam strategically.
Access to Toppers' notes gives you an edge in understanding complex concepts.
Whether you're a beginner or aiming for advanced proficiency, Class 10 Electricity numerical questions Notes on EduRev are your ultimate resource for success.
Class 10 Electricity numerical questions Class 10
The "Class 10 Electricity numerical questions Class 10 Questions" guide is a valuable resource for all aspiring students preparing for the
Class 10 exam. It focuses on providing a wide range of practice questions to help students gauge
their understanding of the exam topics. These questions cover the entire syllabus, ensuring comprehensive preparation.
The guide includes previous years' question papers for students to familiarize themselves with the exam's format and difficulty level.
Additionally, it offers subject-specific question banks, allowing students to focus on weak areas and improve their performance.
Study Class 10 Electricity numerical questions on the App
Students of Class 10 can study Class 10 Electricity numerical questions alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the Class 10 Electricity numerical questions,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of Class 10 Electricity numerical questions is prepared as per the latest Class 10 syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup