UPSC Exam  >  UPSC Notes  >  Science & Technology for UPSC CSE  >  Satellite Frequency Bands

Satellite Frequency Bands | Science & Technology for UPSC CSE PDF Download

In this article, You will read about Satellite Frequency Bands: L, S, C, X, Ku, Ka-band for UPSC IAS.

Satellite technology is developing fast, and the applications for satellite technology are increasing all the time. Not only can satellites be used for radio communications, but they are also used for astronomy, weather forecasting, broadcasting, mapping, and many more applications.
With the variety of satellite frequency bands that can be used, designations have been developed so that they can be referred to easily.
The higher frequency bands typically give access to wider bandwidths but are also more susceptible to signal degradation due to ‘rain fade’ (the absorption of radio signals by atmospheric rain, snow, or ice).
Because of satellite’s increased use, number and size, congestion has become a serious issue in the lower frequency bands. New technologies are being investigated so that higher bands can be used.
Frequency BandsFrequency Bands

Satellite Frequency Bands

  • L-band (1–2 GHz)
  • S-band (2–4 GHz)
  • C-band (4–8 GHz)
  • X-band (8–12 GHz)
  • Ku-band (12–18 GHz)
  • Ka-band (26–40 GHz)

1. L-band (1–2 GHz)
Global Positioning System (GPS) carriers and also satellite mobile phones, such as Iridium; Inmarsat providing communications at sea, land, and air; WorldSpace satellite radio.

2. S-band (2–4 GHz)
Weather radar, surface ship radar, and some communications satellites, especially those of NASA for communication with ISS and Space Shuttle. In May 2009, Inmarsat and Solaris mobile (a joint venture between Eutelsat and Astra) was awarded each a 2×15 MHz portion of the S-band by the European Commission.

3. C-band (4–8 GHz)
Primarily used for satellite communications, for full-time satellite TV networks or raw satellite feeds. Commonly used in areas that are subject to tropical rainfall, since it is less susceptible to rain fade than Ku band (the original Telstar satellite had a transponder operating in this band, used to relay the first live transatlantic TV signal in 1962).

4. X-band (8–12 GHz)
Primarily used by the military. Used in radar applications including continuous-wave, pulsed, single-polarisation, dual- polarisation, synthetic aperture radar, and phased arrays. X-band radar frequency sub-bands are used in civil, military and government institutions for weather monitoring, air traffic control, maritime vessel traffic control, defense tracking, and vehicle speed detection for law enforcement.

5. Ku-band (12–18 GHz)
Used for satellite communications. In Europe, the Ku-band downlink is used from 10.7 GHz to 12.75 GHz for direct broadcast satellite services, such as Astra.

6. Ka-band (26–40 GHz)
Communications satellites for close up high resolutions applications, uplink in either the 27.5 GHz and 31 GHz bands, close-range targeting radars on military aircraft.

Table on BandsTable on Bands

India has recently launched its GSAT-6 from Sriharikota in S-Band to enable multimedia applications for solely strategic military purposes and societal uses in case of emergencies.

Satellite Frequency Bands | Science & Technology for UPSC CSE

The document Satellite Frequency Bands | Science & Technology for UPSC CSE is a part of the UPSC Course Science & Technology for UPSC CSE.
All you need of UPSC at this link: UPSC
146 videos|358 docs|249 tests

Top Courses for UPSC

FAQs on Satellite Frequency Bands - Science & Technology for UPSC CSE

1. What are satellite frequency bands?
Ans. Satellite frequency bands refer to the ranges of frequencies allocated for satellite communication. These bands are used to transmit and receive signals between satellites and ground-based stations.
2. How many satellite frequency bands are there?
Ans. There are several satellite frequency bands allocated for different purposes. The most commonly used bands include C-band, Ku-band, Ka-band, and L-band. Each band has its specific frequency range and characteristics.
3. What is the advantage of using different satellite frequency bands?
Ans. Different satellite frequency bands offer unique advantages based on factors like signal propagation, bandwidth availability, and interference resistance. For example, C-band frequencies have better resistance to rain fade, while Ka-band frequencies provide higher data transfer rates.
4. Can satellite frequency bands be reused for different purposes?
Ans. Yes, satellite frequency bands can be reused for different purposes, but this requires careful coordination and allocation by regulatory bodies. Frequency reuse allows for efficient use of the available spectrum and maximizes the number of simultaneous satellite communications.
5. How are satellite frequency bands regulated?
Ans. Satellite frequency bands are regulated by international organizations like the International Telecommunication Union (ITU). These organizations allocate specific frequency ranges to different satellite services and ensure interference-free communication by defining technical parameters and coordination procedures.
146 videos|358 docs|249 tests
Download as PDF
Explore Courses for UPSC exam

Top Courses for UPSC

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Extra Questions

,

shortcuts and tricks

,

Satellite Frequency Bands | Science & Technology for UPSC CSE

,

Summary

,

Sample Paper

,

study material

,

Previous Year Questions with Solutions

,

past year papers

,

MCQs

,

ppt

,

mock tests for examination

,

Exam

,

pdf

,

Viva Questions

,

practice quizzes

,

video lectures

,

Objective type Questions

,

Free

,

Important questions

,

Satellite Frequency Bands | Science & Technology for UPSC CSE

,

Satellite Frequency Bands | Science & Technology for UPSC CSE

,

Semester Notes

;