2-Inventor Beginner Tutorial: Interface /Start Part/ Units Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

this tutorial will have a look at the
inventor interface so let's start the
Autodesk Inventor
and here we see the first window which
pops up contains many helpful topics
close this window I'll show you the
inventor interface and here as we see
the inventor interface a new open
projects open samples and here are the
small icons a new open and save and here
is the tools online and now let's start
a new part and there's two ways to start
a new part in Inventor we have this in
you and here this small icon new so here
it is a quick choose you can choose
between a simply drawing and bar
comparing that to SolidWorks
new we have part simply drawing and here
we can choose part here we have new part
and if we try the other method by
choosing will be choosing you and here
you have option to choose with more
specific and you can choose so I'm going
to choose the metric and here we can
choose standard with the units
millimeters so now we have the units
will be used in here will be in
millimeters but in case you want to
change the unit's result if you can you
part from here and we want to change the
units you can simply go to
tools you can be sitting units and
change to the desired units so I'm going
to choose millimeter second angle will
be in degrees the mass would be in graph
and then apply closed
so with bar from here and if we have to
look at the interface we can see here it
is divided in section 3d model and speak
to manage view environment get started
so I'm going to show you how to use
icons in the next tutorials
and if we look at the bottom layer we
see this new is the number of open part
every closed one you'll see there's one
or is open and for more help there is if
one bottle you can press to get more
help using the inventor and here we have
the browser window comparing it to the
solid walls if you are familiar with the
SolidWorks it is in this place in
SolidWorks so in the next tutorial I am
going to show you how to start a sketch
and inventor