3-Inventor Beginner Tutorial: Creating your first 2D sketch /Sketch Commands Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

since tutorial number three in winter
and this tutorial we should be going to
create the first sketch in in winter so
let's start new bar standard metric and
greed and here we see in the browser
menu we have the origin creeks span the
origin so we'll have planes and axes so
we have the Y Z plane and exit plane XY
and XY z axis comparing that to
SolidWorks we have B from plane to plane
and right click man
so to start a sketch in one of these
planes so let's choose the XY plane and
here we notice this icon which we can
create a sketch click on this and now we
are on the sketch environment and you
can notice here in the toolbar the
sketch menu is open and here we have the
different type of drawing tools so let's
choose line and here when you're drawing
you notice the dimensions so let's start
from the origin when you are drawing we
can see the dimension and the angle of
the line which are drawing so
so now when we finish drawing we can
make double click so now you can exit
the drawing mode and let's make another
sketch with the line and to exit from
the line drawing we just try to make
right click so I had to choose escape or
okay so now we are outside the line
drawing mode so let's again make line
and if we want to close the sketch we
can just go simply to the endpoint and
click on it or we can show you another
method by clicking on the right button
of the mouse and here you can choose
close so inventory will close this
sketch automatically if you click on the
right button of the mouse you can see
the line option in countries quickly and
make a line as you notice why drawing
you can see small icons which referring
to the relations and if we want to
choose the middle point of this line you
can just move the mouse until you see
the darker point which indicate the sin
the center of this line can choose it
and again if we
right Greg and close so if we make on
the right button of the mouse and choose
construction this time you will draw a
construction geometry which will be used
for example as a guiding reference and
if you choose the center line here you
can draw centre lines for sketchy one so
here you can and you can notice this
duty simple line so when you are done
with the to the sketching you can exit
the sketch by clicking on finish sketch
or right-click and finish to the sketch
so now we are outside the sketch mode