17-Inventor Beginner Tutorial: Revolve Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

tutor 17 about revolt let's start with
the new part Creed and let's create a
sketch on the 2d sketch on the plane and
let's create rectangle now let's give it
some dimension let's make a distance
between origin to be 30 and this
distance to be clearly informed by and
now let's make another line to be
revolve line now let's go to 3d model
and choose the revolve and here in the
revolve menu you have the profile axes
and solids and here you have the output
to be solid or only surface so let's
first choose the profile and make this
profile to be extruded and for the axes
its shoes for example this stitch so it
will devolve around that line 3 again
make undo revolve on this profile and
the axis to be this edge will revolve
around that edge again if we
revolve it around that line which we
created so it will revolve around the
line and here in the options you have
full or angle or two between for example
if you specify an angle here the Raval
for 90 degrees here also you can't
change I get the food for example make
180 so it will revolve 180 so I going to
make it 270 so we have this default if
you change the service so you revolve
only the profile or inches so it will be
only a surface I'm going to keep it all
you know solid and here you have the
directions of revolving if almost the
same right in the extrude now going to
leave it just in the direction one press
ok
so this is almost all about the reform
in the next tutorial I'm going to have
to use the double cut