32 AutoDesk Inventor beginner Tutorial: Spline; types and using Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

tutorial 32 inventor for beginner and
this tutorial are we going to talk about
the interesting tool the spline so let's
go make new the new 2d sketch and here
you see the a spline menu it has three
types so now let's start with the first
style the interpolation and that depends
on you your points for making your a
spline or shaping your a splines
so let's activate the interpolation type
of a spline and then you are able to
create your a spline so when you are
done you click on this okay
for your plate in turn so here you have
your a spline created for all five
points now if you notice each points has
handled where you are able to move it or
control its angle to the shape you want
and the supplied tool is an interesting
tool for the advanced sketching and
designing so it is very important to
know how to work with this tool
so let's go if you click on that line
you will see that handle here you are
able to move it and from the other point
you are able to change its direction so
again let's click on done
so you can't continue when you're
creating you a spline until you get you
shipped so this is one approach how to
control your supply the second approach
for controlling a spline is the
container or the control vertex so let's
activate that so you will notice that
your a spline will be contained in a
vertex edges that in case you want to
create your a spline and some close to
file or whatever also click a scale to
deactivate the plan and then you have
these points where you are able to click
and change the vertex if you have a
mirror with the solid wall and so the
wards provide you all you want option
for a spline only one type but from that
one type with right click you can choose
the vertex and do the same work and the
last type is the bridge curve from its
name so it's kind of an easy tool to
know but hard to get the exact shape you
want so let's make profile any type of
profile and then let's go to the bridge
to create a bridge to connect these two
profiles click on that line and this
interrupt line so you get your bridge or
you connected with this type of bridge
also you can
make it here on this line so you get
that bridge you are able to delete this