42 AutoDesk Inventor beginner Tutorial: Emboss Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

tutorial 42 in Inventor the next feature
in the 3d model menu is imposed after
coil and now we're going to show you how
to use this nice feature or function the
impose is to creating some kind of
pattern that shown in the surfaces so
let's start making a sketch which we
wanted to make projecting 3d project
from that so let's make difference plan
so let's insert this reference plan and
make a sketch on it from the text as we
learned in the previous tutorial and
center it okay so when you are done
click escape to the activity text move
it to the place you want finish sketch
and let's activate the impose feature
you have three different types of the
impose either to have it showing pattern
or groove cut it inside the material and
here you have the directions and the
depth how you want it so for example now
let's see where is the direction what
before the direction we have to select
the profile which we want to impose and
here you see the arrow of the direction
we should have in the other side so here
you can change the direction and the
depth
you can make it one millimeter through
millimeter and here we have it to be in
the phone face okay
and here you have imposed surface or
sketch so let's make it on the other way
to make it cut it inside the material
just change to be this icon second one
okay and here we have so just hide the
plan so you created this nice piece or
meter