BT I like Gujarati

Leaving answered  •  Sep 03, 2017 Class 10

• View Answers

Attach

Reply to Leaving Answer to Question

Hope is the United Arab Emirates Mars Mission, which is a space exploration project aimed at studying the Martian atmosphere and climate, as well as searching for signs of life on the red planet. The mission was launched on J... moreuly 19, 2020, and is expected to reach Mars in February 2021.

Heading: What is the United Arab Emirates Mars Mission?

The United Arab Emirates Mars Mission, also known as the Hope Mars Mission, is a space exploration project initiated by the United Arab Emirates to study the Martian atmosphere and climate. The mission is also aimed at searching for signs of life on the red planet.

Heading: When was the mission launched?

The mission was launched on July 19, 2020, from the Tanegashima Space Center in Japan. The launch was successful, and the spacecraft is currently on its way to Mars.

Heading: What are the objectives of the mission?

The objectives of the mission are to study the Martian atmosphere and climate and to search for signs of life on the red planet. The spacecraft is equipped with three scientific instruments that will enable it to gather data on the Martian atmosphere and weather patterns.

Heading: What are the scientific instruments on board the spacecraft?

The spacecraft is equipped with three scientific instruments, which are:

1. Emirates Mars Infrared Spectrometer (EMIRS) – This instrument will measure the temperature and dust content of the Martian atmosphere.

2. Emirates Mars Ultraviolet Spectrometer (EMUS) – This instrument will study the Martian upper atmosphere and the interactions between the atmosphere and solar radiation.

3. Emirates Mars Atmospheric Probe (EMAP) – This instrument will collect data on the Martian atmosphere and weather patterns by descending into the planet's atmosphere.

Heading: When is the spacecraft expected to reach Mars?

The spacecraft is expected to reach Mars in February 2021, after a journey of approximately seven months. Once it reaches Mars, the spacecraft will enter orbit around the planet and begin its scientific mission.

Sneha Singh answered  •  May 14, 2023 Class 10

• View Answers

Attach

Reply to Sneha Singh Answer to Question

लोकतंत्र के पक्ष में निमनलिखित तर्क दिए गए हैं। 1 लोकतांत्रिक शासन पद्धति दूसरों से बेहतर है क्यों कि इस सासन का स्वरुप अधिक जवाब देह वाला होता है। ... more 2.) लोकतंत्र बेहतर निर्राय लेने की संावना वो को बढ़ाता है। 3.) लोकतंत्र नागरिकों को समान दिला ता है। 4.) लोकतांत्रिक शासन बेवस्था में हमें अपनी गलती ठीक करने का मौका भी मिलता है

Vinod Singh answered  •  Feb 02, 2023 Class 10

• View Answers

Attach

Reply to Vinod Singh Answer to Question

Blood in insect is colourless because it doubts have haemoglobin

Parth Goyal answered  •  Jan 27, 2018 Class 10

• View Answers

Attach

Reply to Parth Goyal Answer to Question

May be start checkonsite

Shobhita Surya answered  •  Jan 31, 2018 Class 10

• View Answers

Attach

Reply to Shobhita Surya Answer to Question

Raj Chaudhary answered  •  Feb 25, 2020 Class 10

• View Answers

Attach

Reply to Raj Chaudhary Answer to Question

To find the value of \(a^2 b^2 ab\), we need to use the sum and product of roots formula.

According to the quadratic equation \(ax^2 + bx + c = 0\), the sum of roots is given by \(-\frac{b}{a}\) and the product of ... moreroots is given by \(\frac{c}{a}\).

In the given equation \(x^2 - 9x - 20 = 0\), the sum of roots is \(-\frac{-9}{1} = 9\) and the product of roots is \(\frac{-20}{1} = -20\).

So, we have \(a + b = 9\) and \(ab = -20\).

To find \(a^2 b^2\), we can square both sides of the equation \(ab = -20\). This gives \(a^2 b^2 = (-20)^2 = 400\).

Now, let's find \(ab\) by substituting the value of \(a + b\) in the equation \(ab = -20\). We have \(9b = -20\), which gives \(b = \frac{-20}{9}\).

Substituting the value of \(b\) in the equation \(a + b = 9\), we can solve for \(a\). We have \(a + \frac{-20}{9} = 9\), which gives \(a = \frac{161}{9}\).

Finally, we can substitute the values of \(a\), \(b\), and \(a^2 b^2\) in the expression \(a^2 b^2 ab\) to find the answer.

\(a^2 b^2 ab = \left(\frac{161}{9}\right)^2 \cdot \left(\frac{-20}{9}\right)^2 \cdot \left(\frac{161}{9}\right) = \frac{161^3 \cdot (-20)^2}{9^3}\).

After simplifying this expression, we get \(\frac{161^3 \cdot 400}{9^3} = 61\).

Therefore, the value of \(a^2 b^2 ab\) is 61, which corresponds to option C.

Sagar Sharma answered  •  Oct 17, 2023 Class 10

• View Answers

Attach

Reply to Sagar Sharma Answer to Question

Common Feature in Frogs and Rabbits: Hepatic Portal System

The hepatic portal system is a network of veins that carries blood from the digestive organs to the liver. It is found in both frogs and rabbits.
... more />Frogs and rabbits are both vertebrates and belong to the class Amphibia and Mammalia respectively. Although they belong to different classes, they share some common features.

The hepatic portal system is an important feature that is found in both frogs and rabbits. This system is responsible for carrying nutrient-rich blood from the digestive organs to the liver, where it is processed before being distributed to the rest of the body.

Other features that are unique to each class include:

- Renal portal system: This is a feature that is unique to amphibians such as frogs. It is a network of veins that carries blood from the hindlimbs and pelvic region to the kidneys for filtration.
- Jugular anastomosis: This is a feature that is unique to mammals such as rabbits. It is a network of veins that connects the two jugular veins, which are the major veins that carry deoxygenated blood back to the heart.
- Anterior abdominal vein: This is a feature that is unique to frogs. It is a large vein that runs along the ventral (belly) side of the body and carries blood from the lower part of the body to the heart.

In summary, while frogs and rabbits share some common features, they also have some unique features that distinguish them from each other. The hepatic portal system is a feature that is found in both frogs and rabbits and plays an important role in nutrient processing and distribution.

Neha Sarkar answered  •  May 14, 2023 Class 10

• View Answers

Attach

Reply to Neha Sarkar Answer to Question

Pratyay in Parikshak

Pratyay is a term used in Indian languages, including Hindi, to refer to an affix or suffix that is added to a word to modify its meaning. Parikshak, on the other hand, means "examiner" or "eva... moreluator." In the context of language, parikshak refers to someone who evaluates or examines the language skills of a person.

Types of Pratyay

There are various types of pratyay in Hindi and other Indian languages. Some of the common types are:

1. Varn Pratyay: These are the pratyay that are added to a word to change its pronunciation or spelling.

2. Vibhakti Pratyay: These pratyay indicate the grammatical case of a noun or pronoun in a sentence.

3. Kriya Pratyay: These pratyay are added to verbs to indicate tense, mood, or voice.

4. Samas Pratyay: These pratyay are added to join two or more words to form a compound word.

Importance of Pratyay in Parikshak

In language exams, a good understanding of pratyay is essential for students to score well. The examiner may ask questions related to pratyay, such as asking the student to identify the pratyay in a particular word or asking them to form a sentence using a specific pratyay.

Tips to Improve Pratyay Knowledge

1. Practice: Regular practice is crucial to improve one's knowledge of pratyay. Students should practice identifying and using pratyay in various contexts.

2. Read: Reading books, newspapers, and other materials in Hindi can help students improve their knowledge of pratyay and their usage.

3. Take help from teachers: Students can seek help from their language teachers to clarify their doubts related to pratyay.

In conclusion, pratyay is an essential component of Indian languages, and its understanding is crucial for language learners. Students should practice and improve their knowledge of pratyay to perform well in language exams.

Bhavya Desai answered  •  May 14, 2023 Class 10

• View Answers

Attach

Reply to Bhavya Desai Answer to Question

Calculation of Time of Concentration

- Time of concentration (Tc) = 28 min

Calculation of Maximum Depth of Rainfall

- Area of catchment (A) = 1.5 km2
- Runoff coefficient (C) = 0.42
... more- Maximum depth of rainfall (P) = (0.278*Tc*C)^(1/3)
- Substituting the given values, we get:
- P = (0.278*28*0.42)^(1/3) = 48 mm

Calculation of Peak Flow Rate

- Peak flow rate (Q) = (C*A*P)/Tc
- Substituting the given values, we get:
- Q = (0.42*1.5*48)/28 = 18 m3/s

Therefore, the correct answer is option 'D' (18 m3/s).

Mahi Patel answered  •  May 14, 2023 Class 10

• View Answers

Attach

Reply to Mahi Patel Answer to Question

The correct answer is option 'D' - Dawn.

Explanation:
Dawn is the time of the day just before the sunrise. It is the period when the sky begins to lighten and the sun is below the horizon but its rays illumina... morete the sky. It is the time when the world is peaceful and the birds begin to chirp.

Dawn is the opposite of dusk, which is the time just after sunset when the sky is still bright but the sun has disappeared below the horizon.

The time of dawn varies depending on the location and time of year. In some places, it can occur several hours before sunrise, while in others it may be just a few minutes before sunrise.

Importance of Dawn:
1. It is a time of peace and quiet when the world is still asleep.
2. It is the best time for meditation and reflection as the mind is fresh and clear.
3. It is a great time for photography as the light is soft and gentle.
4. It is a good time for exercise as the air is fresh and cool.

Conclusion:
Dawn is an important time of the day that marks the beginning of a new day. It is a time of peace, reflection, and new beginnings.

Rajeev Datta answered  •  May 14, 2023 Class 10

• View Answers

Attach

Reply to Rajeev Datta Answer to Question

Monograph vs Catalogue

When it comes to academic writing, two terms that are often used interchangeably are "monograph" and "catalogue". However, while both of these types of publications are similar in many... more ways, there are some key differences that set them apart.

Monograph

A monograph is a detailed and comprehensive study of a particular subject or topic. It is typically written by a single author or a small group of authors and is intended for an academic audience. Monographs can take many forms, including:

- Scholarly books
- Dissertations or theses
- Research reports
- White papers

Monographs are typically written in a very formal and scholarly style, and are often peer-reviewed before publication. They are intended to provide a deep and nuanced understanding of a particular subject, and may be used as reference works by other scholars in the field.

Catalogue

A catalogue, on the other hand, is a publication that lists and describes a collection of items. This could be anything from works of art to historical artifacts to books. Catalogues are intended to provide readers with a comprehensive overview of the items in the collection, and may include detailed descriptions, images, and other relevant information.

Catalogues can take many forms, including:

- Exhibition catalogues
- Library catalogues
- Auction catalogues
- Sales catalogues

Unlike monographs, catalogues are not typically intended to provide in-depth analysis or scholarship on a particular subject. Instead, they are meant to be a resource for people who are interested in the items in the collection.

Key Differences

While both monographs and catalogues are valuable resources for researchers and scholars, there are some key differences between the two:

- Monographs are focused on a particular topic or subject, while catalogues are focused on a collection of items.
- Monographs are typically written in a scholarly style, while catalogues may be more accessible to a general audience.
- Monographs are intended to provide in-depth analysis and scholarship, while catalogues are intended to provide a comprehensive overview of a collection of items.

In conclusion, while both monographs and catalogues are valuable resources in academic writing, they serve different purposes and are intended for different audiences. Monographs provide in-depth analysis and scholarship on a particular subject, while catalogues provide a comprehensive overview of a collection of items.

Bhaskar Yadav answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Bhaskar Yadav Answer to Question

Passage Analysis

moren: justify;">

Summary and Main Point

Pre-Thinking

This is an Inference question. The word “derived” indicates the correct answer will follow closely from what is directly stated in the passage, but it may not itself be explicitly stated in the passage. Select the answer choice that is most strongly bolstered by specific facts mentioned in the passage.

Answer Choices

A

The popularity of Tetra Pak in the packaging industry would increase manifold if the environmentally aware customers change their opinion about it.

Incorrect: Out of Scope

Although we do know that the environmentally aware customers dislike Tetra Pak, there is no information given to us regarding how their dislike affects the overall popularity of Tetra Pak in the packaging industry.

B

The complexity involved in the process of recycling Tetra Pak is the reason behind the material’s limited popularity with environmentally aware consumers.

Incorrect: Opposite

The author clearly states that the reason that Tetra Pak is not popular with the environmentally aware consumers is that they think it is NOT recyclable.

C

It is likely that developed countries, which use a lot more food packaging material than developing countries, have lower rates of food wastage than developing countries.

Incorrect: Out of Scope

There is no comparison given regarding the overall food wastage done by developed and developing countries. So, this information cannot be concluded from the passage

D

No biodegradable substance can be labelled as completely benign for the environment.

Incorrect: Out of Scope

The author says that people treat food as benign since it is biodegradable, but they do not consider the negative impact of food wastage. This information does not give us any reason to draw a generalized, extreme statement such as the one drawn in this choice.

E

In some cases, the recyclability of a material is not the overriding factor in determining its impact on the environment.

Correct

This statement can be derived from the following portion of the passage:

Irrespective of the recycling debate around it, Tetra Pak is a good environmental bet because it can extend the shelf life of milk up to nine months, reducing the need for refrigeration — and reducing the amount of milk that goes bad on retail shelves.  

Clearly, the author does not consider the recyclability of Tetra Pak as the most important factor in determining its impact on the environment.

Harmanjot Singh answered  •  Apr 14, 2020 Class 10

Passage Analysis

... more

Summary and Main Point

Pre-Thinking

This is an Inference question. The word “derived” indicates the correct answer will follow closely from what is directly stated in the passage, but it may not itself be explicitly stated in the passage. Select the answer choice that is most strongly bolstered by specific facts mentioned in the passage.

Answer Choices

A

The popularity of Tetra Pak in the packaging industry would increase manifold if the environmentally aware customers change their opinion about it.

Incorrect: Out of Scope

Although we do know that the environmentally aware customers dislike Tetra Pak, there is no information given to us regarding how their dislike affects the overall popularity of Tetra Pak in the packaging industry.

B

The complexity involved in the process of recycling Tetra Pak is the reason behind the material’s limited popularity with environmentally aware consumers.

Incorrect: Opposite

The author clearly states that the reason that Tetra Pak is not popular with the environmentally aware consumers is that they think it is NOT recyclable.

C

It is likely that developed countries, which use a lot more food packaging material than developing countries, have lower rates of food wastage than developing countries.

Incorrect: Out of Scope

There is no comparison given regarding the overall food wastage done by developed and developing countries. So, this information cannot be concluded from the passage

D

No biodegradable substance can be labelled as completely benign for the environment.

Incorrect: Out of Scope

The author says that people treat food as benign since it is biodegradable, but they do not consider the negative impact of food wastage. This information does not give us any reason to draw a generalized, extreme statement such as the one drawn in this choice.

E

In some cases, the recyclability of a material is not the overriding factor in determining its impact on the environment.

Correct

This statement can be derived from the following portion of the passage:

Irrespective of the recycling debate around it, Tetra Pak is a good environmental bet because it can extend the shelf life of milk up to nine months, reducing the need for refrigeration — and reducing the amount of milk that goes bad on retail shelves.  

Clearly, the author does not consider the recyclability of Tetra Pak as the most important factor in determining its impact on the environment.

• View Answers

Attach

Reply to Harmanjot Singh Answer to Question

This is a DS question on the concept of probability. So, we will apply the A-B-C approach that we have learnt for Probability questions within the 5-step framework that we universally apply f... moreor all DS questions.

 

Steps 1&2: Understand the question and draw inferences

We know that Alex makes n attempts to shoot the target.

We need to determine the probability that he shoots the target in each of the n attempts.

Let us follow the A-B-C  approach to answer this question.

Step A: Write Probability Event Equation

In order to do so, we should list all the events.

Event 1: Alex shoots the target in 1^st attempt

Event 2: Alex shoots the target in 2^nd attempt, and so on. . .

Event n: Alex shoots the target in nth attempt

Now, we should determine whether ‘AND’ or ‘OR’ applies.

The question statement asks about the probability of Alex shooting the target in everyattempt. So, he needs to shoot the target in the 1^st attempt AND in the 2^nd attempt and so on. . .

So, the Probability Event Equation will be:

P(Alexshootingthetargetineveryattempt)=P(Event1)×P(Event2)×...×P(Eventn)

 

Step B: Determine Probabilities of individual events

From the question statement, we do not know:

          i)         What is the probability of his shooting the target in every attempt

          ii)       Whether the probability of his shooting the target is equal for every attempt or different

So, let us assume that:

The probability of his shooting the target the first attempt = P₁

The probability of his shooting the target in the second attempt = P₂  . . .

The probability of his shooting the target in the nth attempt = P_n

Step C: Plug values of Individual Event Probabilities in the Event Equation

Thus, the Event Equation becomes:

P(Alexshootingthetargetineveryattempt)=P1×P2×...×Pn

.......Equation 1

The question asks us whether P(Alex shooting the target in every attempt) is greater than 0.50

In order to answer this question, we need to know the values of P₁, P₂  . . . P_n

Step 3: Analyze Statement 1 independently

Alex has 80% chance of hitting the target in every attempt that he makes

From this statement, we get:

P₁ = P₂ = . .  . P_n  = 0.80

So, Equation 1 becomes:

P(Alex shooting the target in each attempt) = 0.8× 0.8× 0.8...n times

P(Alexshootingthetargetineachattempt)=(0.8)n

Since we do not know the value of n, we will not be able to determine if

P(Alex shooting the target in each attempt ) >0.5

 Thus, Statement 1 alone is not sufficient to answer the question.

Step 4: Analyze Statement 2 independently

He makes 7 attempts in total

From this statement, we get n = 7

Thus, from Equation 1, we get:

 P(Alex shooting the target in each attempt) =P1×P2×...×P7

However, this statement gives us no clue about the values of P₁, P₂  . . . P₇

Thus, Statement 2 alone is clearly not sufficient to answer the question.

   Step 5: Analyze both statements together (if needed)

From Statement 1,

                P(Alex shooting the target in each attempt) =(0.8)n

From Statement 2,

n = 7

 By combining both statements, we get:

            P(Alex shooting the target in each attempt) =(0.8)7

From this equation, we will be able to determine the exact numerical value of the probability that Alex shoots the target in every attempt. Therefore, we will also be able to determine if this value is greater than 0.50 or not.

Thus, both statements together are sufficient to answer the question.

Answer: Option (C) 

 

Harmanjot Singh answered  •  Apr 10, 2020 Class 10

This is a DS question on the concept of probability. So, we will apply the A-B-C approach that we have learnt for Probability questions within the 5-step framework that we universally apply for all DS questions.

 

... more

Steps 1&2: Understand the question and draw inferences

We know that Alex makes n attempts to shoot the target.

We need to determine the probability that he shoots the target in each of the n attempts.

Let us follow the A-B-C  approach to answer this question.

Step A: Write Probability Event Equation

In order to do so, we should list all the events.

Event 1: Alex shoots the target in 1^st attempt

Event 2: Alex shoots the target in 2^nd attempt, and so on. . .

Event n: Alex shoots the target in nth attempt

Now, we should determine whether ‘AND’ or ‘OR’ applies.

The question statement asks about the probability of Alex shooting the target in everyattempt. So, he needs to shoot the target in the 1^st attempt AND in the 2^nd attempt and so on. . .

So, the Probability Event Equation will be:

P(Alexshootingthetargetineveryattempt)=P(Event1)×P(Event2)×...×P(Eventn)

 

Step B: Determine Probabilities of individual events

From the question statement, we do not know:

          i)         What is the probability of his shooting the target in every attempt

          ii)       Whether the probability of his shooting the target is equal for every attempt or different

So, let us assume that:

The probability of his shooting the target the first attempt = P₁

The probability of his shooting the target in the second attempt = P₂  . . .

The probability of his shooting the target in the nth attempt = P_n

Step C: Plug values of Individual Event Probabilities in the Event Equation

Thus, the Event Equation becomes:

P(Alexshootingthetargetineveryattempt)=P1×P2×...×Pn

.......Equation 1

The question asks us whether P(Alex shooting the target in every attempt) is greater than 0.50

In order to answer this question, we need to know the values of P₁, P₂  . . . P_n

Step 3: Analyze Statement 1 independently

Alex has 80% chance of hitting the target in every attempt that he makes

From this statement, we get:

P₁ = P₂ = . .  . P_n  = 0.80

So, Equation 1 becomes:

P(Alex shooting the target in each attempt) = 0.8× 0.8× 0.8...n times

P(Alexshootingthetargetineachattempt)=(0.8)n

Since we do not know the value of n, we will not be able to determine if

P(Alex shooting the target in each attempt ) >0.5

 Thus, Statement 1 alone is not sufficient to answer the question.

Step 4: Analyze Statement 2 independently

He makes 7 attempts in total

From this statement, we get n = 7

Thus, from Equation 1, we get:

 P(Alex shooting the target in each attempt) =P1×P2×...×P7

However, this statement gives us no clue about the values of P₁, P₂  . . . P₇

Thus, Statement 2 alone is clearly not sufficient to answer the question.

   Step 5: Analyze both statements together (if needed)

From Statement 1,

                P(Alex shooting the target in each attempt) =(0.8)n

From Statement 2,

n = 7

 By combining both statements, we get:

            P(Alex shooting the target in each attempt) =(0.8)7

From this equation, we will be able to determine the exact numerical value of the probability that Alex shoots the target in every attempt. Therefore, we will also be able to determine if this value is greater than 0.50 or not.

Thus, both statements together are sufficient to answer the question.

Answer: Option (C) 

 

• View Answers

Attach

Reply to Harmanjot Singh Answer to Question

Arrangements of CALCUTTA:
- The word CALCUTTA has 8 letters.
- The number of ways to arrange 8 letters is 8! = 40,320.
Arrangements of AMERICA:
- The word AMERICA has 7 letters.
- The number of ways t... moreo arrange 7 letters is 7! = 5,040.
Ratio of arrangements:
- The ratio of the number of arrangements of CALCUTTA to AMERICA is 40,320/5,040 = 8/1.
- Simplifying the ratio gives 2/1.
Therefore, the correct answer is option B) 2 : 1.

Nilanjan Saha answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Nilanjan Saha Answer to Question

1 statement - Eco>maths   eng>so.sci   po.sci>history

2 statement  So.sci>maths>history

so the list is eng>so.sci>eco>maths>po.sci>history

Hence the least preferred is HISTORY. 

Rajas Salpekar answered  •  Mar 24, 2019 Class 10

• View Answers

Attach

Reply to Rajas Salpekar Answer to Question

Introduction:
Aung San Suu Kyi is a Burmese politician, diplomat, and author who is a Nobel Peace Prize laureate. She fought for democracy in Myanmar, even under house arrest.

Determination:
... more>Aung San Suu Kyi's determination to fight for democracy in Myanmar was unwavering. Despite being under house arrest for 15 years, she continued to speak out against the military junta that had taken control of the country. She used her platform to advocate for human rights, freedom of speech, and democracy.

International Support:
Aung San Suu Kyi received international support from leaders, activists, and organizations around the world. The international community put pressure on the Burmese government to release her from house arrest and allow her to participate in the political process. This support gave her the strength to continue her fight for democracy.

Use of Media:
Despite being under house arrest, Aung San Suu Kyi was able to communicate with the world through the media. She gave interviews to foreign journalists, wrote articles and books, and used technology to share her message with the world.

Non-Violent Resistance:
Aung San Suu Kyi believed in non-violent resistance as a means of achieving political change. She encouraged her supporters to protest peacefully and to resist the government's attempts to suppress their rights. Her message of non-violence resonated with people around the world who admired her courage and determination.

Conclusion:
Aung San Suu Kyi was able to fight for democracy in Myanmar even under house arrest through her determination, international support, use of media, and commitment to non-violent resistance. Her legacy as a champion of democracy and human rights will continue to inspire people around the world to fight for justice and freedom.

Bhavya Desai answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Bhavya Desai Answer to Question

Introduction
Galvanometer is an instrument used to detect and measure small electric currents. Shunting is the process of adding a resistance in parallel with the galvanometer to reduce its sensitivity.

... more>Given
Resistance of galvanometer = 18 ohm
Deflection shown by galvanometer = 30 divisions
Shunt resistance = 12 ohm

Solution
When a shunt resistance is added in parallel with the galvanometer, the effective resistance of the circuit reduces. This reduces the sensitivity of the galvanometer and increases its range.

The current passing through the galvanometer and shunt resistance is the same. Let the current passing through the circuit be I.

Calculations
Effective resistance of the circuit = (Galvanometer resistance x Shunt resistance) / (Galvanometer resistance + Shunt resistance)
Effective resistance = (18 x 12) / (18 + 12)
Effective resistance = 7.2 ohm

The current passing through the circuit is given by Ohm's law:
I = V / R
where V is the voltage applied and R is the total resistance of the circuit.
Let the voltage applied be V.

Total resistance of the circuit = Galvanometer resistance + Shunt resistance
Total resistance = 18 + 12
Total resistance = 30 ohm

The current passing through the circuit is:
I = V / 30

When there is no shunt resistance, the current passing through the galvanometer is:
Ig = V / 18

The deflection shown by the galvanometer is directly proportional to the current passing through it. Therefore,
Deflection ∝ Current

Let the deflection shown by the galvanometer when no shunt resistance is used be D.

D ∝ Ig
D = k x Ig
where k is a constant of proportionality.

When a shunt resistance is added, the current passing through the galvanometer reduces. Let the deflection shown by the galvanometer when shunt resistance is used be Ds.

Ds ∝ I
Ds = k' x I
where k' is a constant of proportionality.

Since the current passing through the galvanometer and shunt resistance is the same,
Ig = I + Is
where Is is the current passing through the shunt resistance.

Using Ohm's law,
Is = (V / 12)

Therefore,
Ig = I + (V / 12)

The deflection shown by the galvanometer when shunt resistance is used is:
Ds = k' x (I + (V / 12))

Since the voltage applied is constant,
Ds = k'' x (I + 1)
where k'' is a constant of proportionality.

Comparing the two equations for deflection, we get:
Ds / D = (I + 1) / Ig

Substituting the values of Ig and I, we get:
Ds / D = (1 + (V / 12)) / (V / 18)

Putting the given values, we get:
Ds / D = (1 + (V / 12)) / (V / 18) = 0.6

Therefore, the deflection shown by the galvanometer when shunt resistance is used will be 0.6 times the deflection shown when no shunt resistance is

Devanshi Kaur answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Devanshi Kaur Answer to Question

Fictional portrayal of the Mafia in The Godfather trilogy. The prosecutor claims that the mobster sought refuge in Corleone due to its historical ties with the Mafia and its reputation as a stronghold for organized crime.

Anirban Das answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Anirban Das Answer to Question

The angular speed of a fly wheel making 120 revolution /minute is?

Pallavi Singh answered  •  Aug 27, 2019 Class 10

• View Answers

Attach

Reply to Pallavi Singh Answer to Question

'c' option

Prajwalit Gawali answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Prajwalit Gawali Answer to Question

Explanation:

Consignment Basis:
When goods are sent on consignment basis, the ownership of goods remains with the sender (consignor) until it is sold by the receiver (consignee). The consignee on... morely acts as a selling agent and earns a commission on the sale of goods.

Freight:
Freight is the cost incurred for transporting goods from one place to another. In this case, A paid a freight amounting to 1000 for transporting 1000 transistors from A to B.

Cartage:
Cartage is the cost incurred for transporting goods from the place of arrival to the final destination. In this case, A paid a cartage amounting to 100 for transporting 1000 transistors from the place of arrival to the final destination.

Total Cost:
The total cost incurred by A for sending 1000 transistors on consignment basis is as follows:
- Cost of 1000 transistors = 1000 * 80 = 80,000
- Freight = 1000
- Cartage = 100
- Total Cost = 80,000 + 1000 + 100 = 81,100

Conclusion:
In conclusion, A has sent 1000 transistors on consignment basis to B of Mumbai. The ownership of goods remains with A until it is sold by B. A has paid a freight amounting to 1000 and cartage 100 for transporting the goods. The total cost incurred by A for sending 1000 transistors on consignment basis is 81,100.

Devanshi Roy answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Devanshi Roy Answer to Question

1. Mountain building through severe folding of the earth

Diastrophism refers to the processes of deformation of the Earth's crust, including the formation of mountains. Severe folding of the earth's crust is a prim... moreary mechanism of diastrophism and is responsible for the creation of mountain ranges. Therefore, the process of mountain building through severe folding of the earth can be best associated with diastrophism.

Anand Chakraborty answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Anand Chakraborty Answer to Question

What is the main objective of NIESBUD?

• a)
  To provide technical consultancy services to small and medium enterprises.
• b)
  To develop standardized materials and processes for entrepreneurship training.
• c)
  To promote employment-oriented industries in urban areas.
• d)
  To provide market information for industrial enterprises.

Correct answer is option 'B'. Can you explain this answer?

Nivedita singh answered  •  Oct 17, 2023 Class 10

• View Answers

Attach

Reply to Nivedita singh Answer to Question

yaa u can get but with practicing more n more questions

Shobhita Surya answered  •  May 11, 2017 Class 10

• View Answers

Attach

Reply to Shobhita Surya Answer to Question

Role of Philosophers in the French Revolution

The French Revolution was a period of great social, political, and economic upheaval in France, which lasted from 1789 to 1799. During this time, a group of philosopher... mores played a significant role in shaping the ideas and ideals of the revolution. Here are some of the ways in which the philosophers contributed to the French Revolution:

Intellectual inspiration

The philosophers of the Enlightenment period, including Voltaire, Montesquieu, and Rousseau, provided the intellectual inspiration for the French Revolution. Their ideas about individual liberty, equality, and democracy influenced the leaders of the revolution and the people of France.

Challenging the Old Regime

The philosophers' ideas challenged the old regime, which was characterized by an absolute monarchy, aristocracy, and the Church's dominance. Their writings and speeches questioned the legitimacy of the existing social and political order, and called for reforms that would give more power to the people.

Promoting democratic principles

The philosophers promoted democratic principles, advocating for a government that would be based on the will of the people, rather than the arbitrary rule of the monarchy. They called for the establishment of a constitution that would guarantee individual rights, such as freedom of speech, religion, and the press.

Encouraging political activism

The philosophers encouraged political activism among the people, urging them to participate in civic life and fight for their rights. They believed that the people had the power to change their society and that they should use that power to demand reforms.

In conclusion, the philosophers played a significant role in the French Revolution by providing intellectual inspiration, challenging the old regime, promoting democratic principles, and encouraging political activism. Their ideas and ideals continue to influence modern democratic societies.

Nidhi Reddy answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Nidhi Reddy Answer to Question

Explain the functions of SEBI?

Aman answered  •  Mar 12, 2019 Class 10

• View Answers

Attach

Reply to Aman Answer to Question

Its a definition so what do you wanna know?

Nikita Singh answered  •  Jan 03, 2020 Class 10

• View Answers

Attach

Reply to Nikita Singh Answer to Question

The value of the property obtained after deducting the amount of yearly repairs from the gross income is known as rateable value.

Explanation:

The rateable value of a property is an importa... morent concept in real estate and property valuation. It is used to determine the amount of property tax or rates that need to be paid by the property owner. The rateable value is calculated by subtracting the amount of yearly repairs from the gross income of the property.

Why is it called rateable value?

The term "rateable value" is derived from the fact that property taxes or rates are often calculated as a percentage of the rateable value of the property. The rateable value serves as a basis for determining the tax liability of the property owner.

Components of rateable value:

1. Gross income: The gross income of a property refers to the total income generated by the property over a specific period of time. This includes the rental income from tenants, any additional income from amenities or services, and any other sources of revenue.

2. Yearly repairs: Yearly repairs refer to the expenses incurred in maintaining and repairing the property on an annual basis. This includes costs for regular maintenance, repairs, and replacements of any damaged or worn-out components of the property.

Calculation of rateable value:

The rateable value is calculated by subtracting the amount of yearly repairs from the gross income of the property. This calculation represents the net income or value of the property after deducting the expenses associated with repairs.

Rateable value = Gross income - Yearly repairs

Significance of rateable value:

The rateable value is used by local authorities or municipalities to assess the property tax or rates that need to be paid by the property owner. It helps in determining the fair and equitable tax liability based on the income-generating potential and maintenance costs of the property.

In conclusion, the rateable value of a property is the value obtained after deducting the amount of yearly repairs from the gross income. It serves as the basis for calculating property taxes or rates and helps in determining the fair tax liability for property owners.

Sharmila Gupta answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Sharmila Gupta Answer to Question

Requirements for Production of Goods and Services

There are several requirements for the production of goods and services, which are essential for the smooth functioning of the economy. These requirements include:<... morebr />
1. Land: Land is a crucial factor of production that is required for the production of goods and services. It includes natural resources such as water, minerals, forests, and agricultural land. For example, agricultural land is used for the production of crops, and forests provide wood for the production of paper.

2. Labor: Labor refers to the human effort that is required for the production of goods and services. It includes both skilled and unskilled workers who are involved in the production process. For example, a factory worker who assembles a car is a skilled laborer, while a farmer who harvests crops is an unskilled laborer.

3. Capital: Capital refers to the machinery, equipment, and tools that are required for the production process. These resources are used to produce goods and services more efficiently. For example, a construction company may use heavy machinery such as bulldozers and cranes to build a skyscraper.

4. Entrepreneurship: Entrepreneurship refers to the ability to take risks and innovate in order to create new products and services. Entrepreneurs are responsible for identifying new business opportunities and bringing them to market. For example, Steve Jobs was an entrepreneur who founded Apple and created innovative products such as the iPhone.

Conclusion

The production of goods and services requires the combination of land, labor, capital, and entrepreneurship. These factors of production are essential for the smooth functioning of the economy and the creation of new products and services that improve people's lives.

Kritika Bose answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Kritika Bose Answer to Question

The diameter of the concrete flag post varies from 200mm at the base and 100mm at the top. if the height of the post os 8m and a horizontal load of 500N is acting at top?

Samten Zangmo answered  •  Oct 17, 2023 Class 10

• View Answers

Attach

Reply to Samten Zangmo Answer to Question

S Chand for science

Lavish Jain answered  •  Jun 30, 2018 Class 10

• View Answers

Attach

Reply to Lavish Jain Answer to Question

we get it from nature it doesn't stops at nyt

Ayushi Gill answered  •  May 28, 2017 Class 10

• View Answers

Attach

Reply to Ayushi Gill Answer to Question

Answer:

Forces of tension and compression in pre-stressed concrete remain unchanged but lever arm changes with the moment. This can be explained as follows:

Forces of tension and compression in pre-stres... moresed concrete:

- Pre-stressed concrete is a type of reinforced concrete in which high-strength steel strands or tendons are tensioned before the concrete is cast.
- The tensioned tendons are anchored to the concrete at the ends and are then released, causing them to exert a compressive force on the concrete.
- This compression counteracts the tensile stresses that occur when the concrete is subjected to external loads, such as the weight of a building or bridge.

Lever arm in pre-stressed concrete:

- The lever arm is the distance between the force and the point where it is applied.
- In pre-stressed concrete, the lever arm changes with the moment, which is the tendency of a force to cause rotation around a point.
- When a moment is applied to a pre-stressed concrete member, such as a beam or slab, the lever arm changes as the point of application of the force moves closer or further away from the point of rotation.
- This change in lever arm affects the distribution of stresses within the member and can lead to cracking or failure if not properly accounted for in the design.

Conclusion:

In conclusion, forces of tension and compression in pre-stressed concrete remain unchanged, but the lever arm changes with the moment. This change in lever arm must be taken into account in the design of pre-stressed concrete members to ensure their safety and durability.

Neha Basak answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Neha Basak Answer to Question

Introduction:
The ocean is the most stable ecosystem among the given options. It is a vast, interconnected system that provides a stable environment for numerous organisms to thrive. Let's explore the reasons why ... morethe ocean is considered the most stable ecosystem.

1. Biodiversity:
The ocean is home to a diverse range of organisms. It supports a wide variety of species, including phytoplankton, zooplankton, fish, marine mammals, and coral reefs. This high biodiversity helps in maintaining a stable ecosystem by creating complex food webs and nutrient cycles.

2. Constant Temperature:
The ocean has a large heat capacity, which means it can absorb and store a significant amount of heat. As a result, the temperature of the ocean remains relatively stable compared to other ecosystems. This stability in temperature provides a consistent environment for marine organisms to live in.

3. Water Circulation:
Ocean currents play a crucial role in maintaining the stability of the ecosystem. They distribute heat, nutrients, and oxygen throughout the ocean, creating favorable conditions for marine life. The circulation patterns help regulate temperature, salinity, and nutrient availability, ensuring the stability of the ecosystem.

4. Buffering Effect:
The ocean acts as a buffer against changes in the surrounding environment. It absorbs excess carbon dioxide from the atmosphere, thereby mitigating the impacts of climate change. Additionally, the high concentration of dissolved ions in seawater helps maintain a stable pH level, providing a suitable habitat for marine organisms.

5. Longevity:
The ocean has existed for millions of years and has evolved to sustain life over long periods. Its stability can be attributed to the resilience of marine organisms and their ability to adapt to changing conditions. This longevity allows for the development of intricate ecological relationships and ensures the overall stability of the ecosystem.

Conclusion:
In conclusion, the ocean is the most stable ecosystem due to its high biodiversity, constant temperature, water circulation, buffering effect, and longevity. These factors work together to create a balanced and resilient environment that supports a wide range of marine life.

Anand Chakraborty answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Anand Chakraborty Answer to Question

Trial Balance of Green and Co as on 30th June 2008

Explanation

A trial balance is a statement that lists all the ledger accounts and their balances to check the accuracy of accounting records. It is prepared at the end of an accounting period, usually monthly, quarterly, or annually.

The trial balance of Green and Co as on 30th June 2008 is a list of all the ledger accounts with their debit and credit balances. It is used to ensure that the total debits equal the total credits, indicating that the accounting records are accurate and complete.

Trial Balance

• Cash in hand - Debit balance of $5,000


• Bank overdraft - Credit balance of $10,000


• Accounts receivable - Debit balance of $20,000


• Accounts payable - Credit balance of $15,000


• Inventory - Debit balance of $25,000


• Land and building - Debit balance of $100,000


• Machinery - Debit balance of $50,000


• Capital - Credit balance of $150,000


• Sales - Credit balance of $75,000


• Purchases - Debit balance of $45,000


• Salaries and wages - Debit balance of $30,000


• Rent - Debit balance of $5,000

Conclusion

The trial balance of Green and Co as on 30th June 2008 shows that the total debits equal the total credits, indicating that the accounting records are accurate and complete. It is an important tool for accountants to ensure the accuracy of financial statements and to identify any errors or omissions in the accounting records.

Aman Chaudhary answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Aman Chaudhary Answer to Question

 पिता की पत्नी – माँ, माँ का भाई – मामा, मामा का पुत्र – ममेरा भाई

 अत: रोहित अनिल का ममेरा भाई है |

Prateek Banerjee answered  •  Jul 20, 2019 Class 10

• View Answers

Attach

Reply to Prateek Banerjee Answer to Question

Explanation:

The concentration of a solution is defined as the amount of solute present in a given volume of solution. It is usually expressed in terms of molarity (M) or molality (m). Molarity is the number... more of moles of solute per liter of solution, while molality is the number of moles of solute per kilogram of solvent.

1M solⁿ:
1M solⁿ refers to a solution that contains 1 mole of solute per liter of solution. This means that there is a high concentration of solute in the solution. The capital "M" in 1M solⁿ stands for molarity, which is a measure of the concentration of a solution.

1m solⁿ:
1m solⁿ refers to a solution that contains 1 millimole of solute per liter of solution. This means that there is a lower concentration of solute in the solution. The lower case "m" in 1m solⁿ stands for millimolarity, which is a less commonly used unit of concentration.

Which one is more concentrated?
1M solⁿ is more concentrated than 1m solⁿ. This is because 1M solⁿ contains 1000 times more solute than 1m solⁿ. In other words, 1M solⁿ is 1000 times more concentrated than 1m solⁿ.

Conclusion:
In summary, the concentration of a solution is a measure of the amount of solute present in a given volume of solution. Molarity and millimolarity are two common units of concentration, with molarity being the more commonly used unit. 1M solⁿ is more concentrated than 1m solⁿ, with 1M solⁿ containing 1000 times more solute than 1m solⁿ.

Abhay Sengupta answered  •  May 15, 2023 Class 10

• View Answers

Attach

Reply to Abhay Sengupta Answer to Question

Components of Human Development Index (HDI)

The Human Development Index (HDI) is a composite measure of human development that takes into account various aspects of well-being and progress. It consists of three components:

1. Health: This component considers life expectancy at birth as an indicator of overall health and well-being. It reflects the average number of years a newborn is expected to live, which is influenced by factors such as access to quality healthcare, nutrition, and sanitation. Higher life expectancy indicates better health outcomes and is an important dimension of development.

2. Educational attainment: This component measures the level of education in a society by considering two indicators: mean years of schooling and expected years of schooling. Mean years of schooling depict the average number of years of education that individuals aged 25 and older have received, while expected years of schooling represent the number of years a child of school-going age is expected to receive education. Education is crucial for personal development, social mobility, and economic opportunities.

3. Standard of living: This component is measured by Gross National Income (GNI) per capita, which reflects the economic well-being of individuals. GNI per capita considers the overall income generated within a country, including income from both domestic and foreign sources, and divides it by the population. It provides an indication of the resources available to individuals for meeting their basic needs, accessing goods and services, and improving their quality of life.

Attributes of Regional or National Developmental Aspirations or Goals

Regional or national developmental aspirations and goals vary across different countries and regions, depending on their specific needs, priorities, and socio-economic conditions. However, some common attributes can be identified:

1. Eradication of poverty: A common developmental aspiration is to reduce and ultimately eradicate poverty. This involves ensuring access to basic necessities such as food, water, shelter, and healthcare for all individuals. Poverty alleviation programs, social safety nets, and sustainable economic growth are key strategies employed to achieve this goal.

2. Quality education and skill development: Many countries prioritize the improvement of their education systems to provide quality education and skill development opportunities to their population. This includes enhancing access to education, improving educational infrastructure, and promoting lifelong learning to foster human capital development.

3. Sustainable economic growth: Developmental aspirations often include the promotion of sustainable economic growth that is inclusive and environmentally friendly. This involves fostering entrepreneurship, attracting investments, diversifying the economy, and creating employment opportunities to improve the standard of living and reduce income inequality.

4. Infrastructure development: Enhancing infrastructure is a crucial goal for many countries as it facilitates economic activities, connectivity, and social development. This may involve investments in transportation networks, energy systems, communication technologies, and urban development to improve living conditions and ensure equitable access to resources and services.

5. Healthcare and well-being: Ensuring access to quality healthcare services, improving public health infrastructure, and addressing health disparities are common developmental goals. This includes reducing infant mortality rates, improving maternal health, combating diseases, and promoting preventive healthcare measures.

6. Social inclusion and equality: Many countries aspire to achieve social inclusion and equality by reducing discrimination, promoting gender equality, empowering marginalized groups, and ensuring

Amrita Sengupta answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Amrita Sengupta Answer to Question

The correct answer is B.

Let T1:Event that doctor came by train

T2:Event that doctor came by Bus

T3:Event that doctor came by scooter

T4:Event that doctor came by other means of transport

L :Event that doctor arrives late.

Probability if doctor comes by train if he is late

Madhurima Rane answered  •  May 30, 2020 Class 10

The correct answer is B.

Let T1:Event that doctor came by train

T2:Event that doctor came by Bus

T3:Event that doctor came by scooter

T4:Event that doctor came by other means of transport

L :Event that doctor arrives late.

Probability if doctor comes by train if he is late

• View Answers

Attach

Reply to Madhurima Rane Answer to Question

The options are missing from the question. Could you please provide the options?

Stuti Patel answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Stuti Patel Answer to Question

The First industrial Revolution had far-reaching effects in Britain. Later, similar changes occurred in European countries and in the USA. These were to have a major impact on the society and economy of those countries and also on the rest of the world.

Bhupesh answered  •  Apr 09, 2020 Class 10

• View Answers

Attach

Reply to Bhupesh Answer to Question

The current order of priority in settlement of liabilities and capital upon dissolution is as follows:

1. Expense incurred on realization of assets such as commission, cartage, brokerage etc. (a)
2. All outsid... moree creditors (b)
3. Balances in Capital Accounts of partners (c)
4. Partner (d)

Bhargavi Roy answered  •  Oct 18, 2023 Class 10

• View Answers

Attach

Reply to Bhargavi Roy Answer to Question

By Gauss divergence theorem

The correct answer is: 226.194

Aryan Choudhary answered  •  Sep 21, 2019 Class 10

By Gauss divergence theorem

The correct answer is: 226.194

• View Answers

Attach

Reply to Aryan Choudhary Answer to Question

8

Shobhita Surya answered  •  May 28, 2017 Class 10

• View Answers

Attach

Reply to Shobhita Surya Answer to Question