NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

NCERT Textbooks (Class 6 to Class 12)

Created by: Mohit Rajpoot

Class 11 : NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The document NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev is a part of the Class 11 Course NCERT Textbooks (Class 6 to Class 12).
All you need of Class 11 at this link: Class 11

NCERT QUESTION

(Organic chemistry)

Ques 12.1: What are hybridisation states of each carbon atom in the following compounds?

CH2=C=O, CH3CH=CH2, (CH3)2CO, CH2=CHCN, C6H6

Ans: (i) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

C–1 is sp2 hybridised.

C–2 is sp hybridised.

(ii) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

C–1 is sp3 hybridised.

C–2 is sp2 hybridised.

C–3 is sp2 hybridised.

(iii)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

C–1 and C–3 are sp3 hybridised.

C–2 is sp2 hybridised.

(iv) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

C–1 is sp2 hybridised.

C–2 is sp2 hybridised.

C–3 is sp hybridised.

(v) C6H6

All the 6 carbon atoms in benzene are sp2 hybridised.

Ques 12.2: Indicate the σ and π bonds in the following molecules:

C6H6, C6H12, CH2Cl2, CH= C = CH2, CH3NO2, HCONHCH3

Ans: (i) C6H6

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There are six C–C sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, six C–H sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, and three C=C pi (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev )resonating bonds in the given compound.

(ii) C6H12

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There are six C–C sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds and twelve C–H sigma ( NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev) bonds in the given compound.

(iii) CH2Cl2

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There two C–H sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds and two C–Cl sigma ( NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev) bonds in the given compound.

(iv) CH= C = CH2

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There are two C–C sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, four C–H sigma ( NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev) bonds, and two C=C pi (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds in the given compound.

(v) CH3NO2

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There are three C–H sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, one C–N sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bond, one N–O sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bond, and one N=O pi (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bond in the given compound.

(vi) HCONHCH3

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

There are two C–N sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, four C–H sigma (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bonds, one N–H sigma bond, and one C=O pi (NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev ) bond in the given compound.

Ques 12.3: Write bond line formulas for: 

Isopropyl alcohol,  2,3-Dimethyl butanal,  Heptan-4-one.

Ans: The bond line formulae of the given compounds are:

(a) Isopropyl alcohol

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) 2, 3–dimethyl butanal

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(c) Heptan–4–one

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ques 12.4: Give the IUPAC names of the following compounds:

(a)  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev  
 (b)   
NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev    

(c)  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev       
 (d)   
NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev   

(e)   NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev
(f)        Cl2CHCH2OH

 

Ans: (a)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

1–phenyl propane

(b)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

3–methylpentanenitrile

(c)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

2, 5–dimethyl heptane

(d)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

3–bromo–3–chloroheptane

(e)

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

3–chloropropanal

(f) Cl2CHCH2OH

2, 2–dichloroethanol

Ques 12.5: Which of the following represents the correct IUPAC name for the compounds concerned?

(a) 2,2-Dimethylpentane or 2-Dimethylpentane                     

(b) 2,4,7-Trimethyloctane or 2,5,7-Trimethyloctane

(c) 2-Chloro-4-methylpentane or 4-Chloro-2-methylpentane 

(d) But-3-yn-1-ol or But-4-ol-1-yne

Ans: (a) The prefix di in the IUPAC name indicates that two identical substituent groups are present in the parent chain. Since two methyl groups are present in the C–2 of the parent chain of the given compound, the correct IPUAC name of the given compound is 2, 2–dimethylpentane.

(b) Locant number 2, 4, 7 is lower than 2, 5, 7. Hence, the IUPAC name of the given compound is 2, 4, 7–trimethyloctane.

(c) If the substituents are present in the equivalent position of the parent chain, then the lower number is given to the one that comes first in the name according to the alphabetical order. Hence, the correct IUPAC name of the given compound is 2–chloro–4–methylpentane.

(d) Two functional groups – alcoholic and alkyne – are present in the given compound. The principal functional group is the alcoholic group. Hence, the parent chain will be suffixed with ol. The alkyne group is present in the C–3 of the parent chain. Hence, the correct IUPAC name of the given compound is But–3–yn–1–ol.

Ques 12.6: Draw formulas for the first five members of each homologous series beginning with the following compounds. 

(a) H–COOH
 (b) CH3COCH3 
 (c) H–CH=CH2

Ans: The first five members of each homologous series beginning with the given compounds are shown as follows:

(a)

H–COOH : Methanoic acid

CH3–COOH : Ethanoic acid

CH3–CH2–COOH : Propanoic acid

CH3–CH2–CH2–COOH : Butanoic acid

CH3–CH2–CH2–CH2–COOH : Pentanoic acid

(b)

CH3COCH3 : Propanone

CH3COCH2CH: Butanone

CH3COCH2CH2CH: Pentan-2-one

CH3COCH2CH2CH2CH: Hexan-2-one

CH3COCH2CH2CH2CH2CH: Heptan-2-one

(c)

H–CH=CH2 : Ethene

CH3–CH=CH: Propene

CH3–CH2–CH=CH2 : 1-Butene

CH3–CH2–CH2–CH=CH: 1-Pentene

CH3–CH2–CH2–CH2–CH=CH2 : 1-Hexene

Ques 12.7: Give condensed and bond line structural formulas and identify the functional group(s) present, if any, for :

(a) 2,2,4-Trimethylpentane                                          

(b) 2-Hydroxy-1,2,3-propanetricarboxylic acid

(c) Hexanedial

Ans: (a) 2, 2, 4–trimethylpentane

Condensed formula:

(CH3)2CHCH2C (CH3)3

Bond line formula:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) 2–hydroxy–1, 2, 3–propanetricarboxylic acid

Condensed Formula:

(COOH)CH2C(OH) (COOH)CH2(COOH)

Bond line formula:

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The functional groups present in the given compound are carboxylic acid (–COOH) and alcoholic (–OH) groups.

(c) Hexanedial

Condensed Formula:

(CHO) (CH2)4 (CHO)

Bond line Formula:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The functional group present in the given compound is aldehyde  (–CHO).

Ques 12.8: Identify the functional groups in the following compounds

(a)       NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                                

(b)   NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                                   

(c)  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev     

 

Ans: The functional groups present in the given compounds are:

(a) Aldehyde (–CHO),

Hydroxyl(–OH), 

Methoxy (–OMe),

C=C double bond NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) Amino (–NH2); primary amine,

Ester (-O-CO-), 

Triethylamine (N(C2H5)2); tertiary amine

(c) Nitro (–NO2),

C=C double bond 

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ques 12.9: Which of the two: O2NCH2CH2O or CH3CH2O is expected to be more stable and why?

Ans: NO2 group is an electron-withdrawing group. Hence, it shows –I effect. By withdrawing the electrons toward it, the NO2 group decreases the negative charge on the compound, thereby stabilising it. On the other hand, ethyl group is an electron-releasing group. Hence, the ethyl group shows +I effect. This increases the negative charge on the compound, thereby destabilising it. Hence, O2NCH2CH2O is expected to be more stable than CH3CH2O.

Ques 12.10: Explain why alkyl groups act as electron donors when attached to a π  system.

Ans: When an alkyl group is attached to a  π  system, it acts as an electron-donor group by the process of hyperconjugation. To understand this concept better, let us take the example of propene.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

In hyperconjugation, the sigma electrons of the C–H bond of an alkyl group are delocalised. This group is directly attached to an atom of an unsaturated system. The delocalisation occurs because of a partial overlap of a sp3s sigma bond orbital with an empty orbital of the π bond of an adjacent carbon atom.

The process of hyperconjugation in propene is shown as follows:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

This type of overlap leads to a delocalisation (also known as no-bond resonance) of the π electrons, making the molecule more stable.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ques 12.11: Draw the resonance structures for the following compounds. Show the electron shift using curved-arrow notation.

 

(a) C6H5OH  
 (b) C6H5NO2
 (c) CH3CH = CH – CHO

(d) C6H5CHO 
 (e) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev 
 (f) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ans: (a) The structure of C6H5OH is:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The resonating structures of phenol are represented as:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) The structure of C6H5NO2 is:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The resonating structures of nitro benzene are represented as:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(c) CH3CH = CH – CHO

The resonating structures of the given compound are represented as:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(d) The structure of C6H5CHO is:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The resonating structures of benzaldehyde are represented as:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(e) C6H5CH2

The resonating structures of the given compound are:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(f) CHCH = CH CH2

The resonating structures of the given compound are:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ques 12.12: What are electrophiles and nucleophiles? Explain with examples.

Ans: An electrophile is a reagent that takes away an electron pair. In other words, an electron-seeking reagent is called an electrophile (E+ ). Electrophiles are electron-deficient and can receive an electron pair.

CarbocationsNCERT Solutions - Organic Chemistry Class 11 Notes | EduRev and neutral molecules having functional groups such as carbonyl group   ( NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev) are examples of electrophiles.

A nulceophile is a reagent that brings an electron pair. In other words, a nucleus-seeking reagent is called a nulceophile (Nu:). For example: OH, NC, carbanions (R3C), etc.

Neutral molecules such as H2Ö and ammonia also act as nulceophiles because of the presence of a lone pair.

Ques 12.13: Identify the reagents shown in bold in the following equations as nucleophiles or electrophiles:

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ans: Electrophiles are electron-deficient species and can receive an electron pair. On the other hand, nucleophiles are electron-rich species and can donate their electrons.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Here, HO acts as a nucleophile as it is an electron-rich species, i.e., it is a nucleus-seeking species.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Here, CN acts as a nucleophile as it is an electron-rich species, i.e., it is a nucleus-seeking species.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Here, NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev acts as an electrophile as it is an electron-deficient species.

Ques 12.14: Classify the following reactions in one of the reaction type studied in this unit.

(a) CH3CH2Br + HS → CH3CH2SH +Br

(b) (CH3)2 C = CH2 + HCl → (CH3)2 ClC–CH3

(c) CH3CH2Br + HO → CH2 = CH2 + H2O Br

(d) (CH3)3 C – CH2 OH+ HBr → (CH3)2 CBrCH2CH3 + H2O

Ans: (a) It is an example of substitution reaction as in this reaction the bromine group in bromoethane is substituted by the –SH group.

(b) It is an example of addition reaction as in this reaction two reactant molecules combine to form a single product.

(c) It is an example of elimination reaction as in this reaction hydrogen and bromine are removed from bromoethane to give ethene.

(d) In this reaction, substitution takes place, followed by a rearrangement of atoms and groups of atoms.

Ques 12.15: What is the relationship between the members of following pairs of structures? Are they structural or geometrical isomers or resonance contributors?

(a)         NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                                        

(b)      NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev 

(c)       NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ans: (a) Compounds having the same molecular formula but with different structures are called structural isomers. The given compounds have the same molecular formula but they differ in the position of the functional group (ketone group).

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

In structure I, ketone group is at the C-3 of the parent chain (hexane chain) and in structure II, ketone group is at the C-2 of the parent chain (hexane chain). Hence, the given pair represents structural isomers.

(b) Compounds having the same molecular formula, the same constitution, and the sequence of covalent bonds, but with different relative position of their atoms in space are called geometrical isomers.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

In structures I and II, the relative position of Deuterium (D) and hydrogen (H) in space are different. Hence, the given pairs represent geometrical isomers.

(c) The given structures are canonical structures or contributing structures. They are hypothetical and individually do not represent any real molecule. Hence, the given pair represents resonance structures, called resonance isomers.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ques 12.16: For the following bond cleavages, use curved-arrows to show the electron flow and classify each as homolysis or heterolysis. Identify reactive intermediate produced as free radical, carbocation and carbanion.

(a)   NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                         

(b)       NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(c)   NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                               

(d)      NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ans: (a) The bond cleavage using curved-arrows to show the electron flow of the given reaction can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is an example of homolytic cleavage as one of the shared pair in a covalent bond goes with the bonded atom. The reaction intermediate formed is a free radical.

(b) The bond cleavage using curved-arrows to show the electron flow of the given reaction can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is an example of heterolytic cleavage as the bond breaks in such a manner that the shared pair of electrons remains with the carbon of propanone. The reaction intermediate formed is carbanion.

(c) The bond cleavage using curved-arrows to show the electron flow of the given reaction can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is an example of heterolytic cleavage as the bond breaks in such a manner that the shared pair of electrons remains with the bromine ion. The reaction intermediate formed is a carbocation.

(d) The bond cleavage using curved-arrows to show the electron flow of the given reaction can be represented as

  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is a heterolytic cleavage as the bond breaks in such a manner that the shared pair of electrons remains with one of the fragments. The intermediate formed is a carbocation.

Ques 12.17: Explain the terms Inductive and Electromeric effects. Which electron displacement effect explains the following correct orders of acidity of the carboxylic acids?

(a) Cl3CCOOH > Cl2CHCOOH > ClCH2COOH           
 (b) CH3CH2COOH > (CH3)2CHCOOH > (CH3)3C.COOH

Ans: Inductive effect

The permanent displacement of sigma (σ) electrons along a saturated chain, whenever an electron withdrawing or electron donating group is present, is called inductive effect.

Inductive effect could be +I effect or – I effect. When an atom or group attracts electrons towards itself more strongly than hydrogen, it is said to possess – I effect. For example,

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

When an atom or group attracts electrons towards itself less strongly than hydrogen, it is said to possess I effect. For example,

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Electrometric effect

It involves the complete transfer of the shared pair of π electrons to either of the two atoms linked by multiple bonds in the presence of an attacking agent. For example,

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Electrometric effect could be +E effect or – E effect.

+E effect: When the electrons are transferred towards the attacking reagent

– E effect: When the electrons are transferred away from the attacking reagent

(a) Cl3CCOOH > Cl2CHCOOH > ClCH2COOH

The order of acidity can be explained on the basis of Inductive effect (– I effect). As the number of chlorine atoms increases, the – I effect increases. With the increase in – I effect, the acid strength also increases accordingly.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) CH3CH2COOH > (CH3)2 CHCOOH > (CH3)3 C.COOH

The order of acidity can be explained on the basis of inductive effect ( I effect). As the number of alkyl groups increases, the +I effect also increases. With the increase in +I effect, the acid strength also increases accordingly.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ques 12.18: Give a brief description of the principles of the following techniques taking an example in each case.

(a) Crystallisation                   
 (b) Distillation                       
 (c) Chromatography

Ans: (a) Crystallisation

Crystallisation is one of the most commonly used techniques for the purification of solid organic compounds.

Principle: It is based on the difference in the solubilites of the compound and the impurities in a given solvent. The impure compound gets dissolved in the solvent in which it is sparingly soluble at room temperature, but appreciably soluble at higher temperature. The solution is concentrated to obtain a nearly saturated solution. On cooling the solution, the pure compound crystallises out and is removed by filtration.

For example, pure aspirin is obtained by recrystallising crude aspirin. Approximately 2 – 4 g of crude aspirin is dissolved in about 20 mL of ethyl alcohol. The solution is heated (if necessary) to ensure complete dissolution. The solution is then left undisturbed until some crystals start to separate out. The crystals are then filtered and dried.

(b) Distillation

This method is used to separate volatile liquids from non-volatile impurities or a mixture of those liquids that have a sufficient difference in their boiling points.

Principle: It is based on the fact that liquids having different boiling points vapourise at different temperatures. The vapours are then cooled and the liquids so formed are collected separately.

For example, a mixture of chloroform (b.p = 334 K) and aniline (b.p = 457 K) can be separated by the method of distillation. The mixture is taken in a round bottom flask fitted with a condenser. It is then heated. Chloroform, being more volatile, vaporizes first and passes into the condenser. In the condenser, the vapours condense and chloroform trickles down. In the round bottom flask, aniline is left behind.

(c) Chromatography

It is one of the most useful methods for the separation and purification of organic compounds.

Principle: It is based on the difference in movement of individual components of a mixture through the stationary phase under the influence of mobile phase.

For example, a mixture of red and blue ink can be separated by chromatography. A drop of the mixture is placed on the chromatogram. The component of the ink, which is less adsorbed on the chromatogram, moves with the mobile phase while the less adsorbed component remains almost stationary.

Ques 12.19: Describe the method, which can be used to separate two compounds with different solubilities in a solvent S.

Ans: Fractional crystallisation is the method used for separating two compounds with different solubilities in a solvent S. The process of fractional crystallisation is carried out in four steps.

(a) Preparation of the solution: The powdered mixture is taken in a flask and the solvent is added to it slowly and stirred simultaneously. The solvent is added till the solute is just dissolved in the solvent. This saturated solution is then heated.

(b) Filtration of the solution: The hot saturated solution is then filtered through a filter paper in a China dish.

(c) Fractional crystallisation: The solution in the China dish is now allowed to cool. The less soluble compound crystallises first, while the more soluble compound remains in the solution. After separating these crystals from the mother liquor, the latter is concentrated once again. The hot solution is allowed to cool and consequently, the crystals of the more soluble compound are obtained.

(d) Isolation and drying: These crystals are separated from the mother liquor by filtration. Finally, the crystals are dried.

Ques 12.20: What is the difference between distillation, distillation under reduced pressure and steam distillation ?

Ans: The differences among distillation, distillation under reduced pressure, and steam distillation are given in the following table.

 

Distillation

Distillation under reduced pressure

Steam distillation

 

 1.

It is used for the purification of compounds that are associated with non-volatile impurities or those liquids, which do not decompose on boiling. In other words, distillation is used to separate volatile liquids from non-volatile impurities or a mixture of those liquids that have sufficient difference in boiling points.

This method is used to purify a liquid that tends to decompose on boiling. Under the conditions of reduced pressure, the liquid will boil at a low temperature than its boiling point and will, therefore, not decompose.

It is used to purify an organic compound, which is steam volatile and immiscible in water. On passing steam, the compound gets heated up and the steam gets condensed to water. After some time, the mixture of water and liquid starts to boil and passes through the condenser. This condensed mixture of water and liquid is then separated by using a separating funnel.

2.

Mixture of petrol and kerosene is separated by this method.

Glycerol is purified by this method. It boils with decomposition at a temperature of 593 K. At a reduced pressure, it boils at 453 K without decomposition.

A mixture of water and aniline is separated by steam distillation.

 

 

Ques 12.21: Discuss the chemistry of Lassaigne’s test.

Ans: 

Lassaigne’s test

This test is employed to detect the presence of nitrogen, sulphur, halogens, and phosphorous in an organic compound. These elements are present in the covalent form in an organic compound. These are converted into the ionic form by fusing the compound with sodium metal.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The cyanide, sulphide, and halide of sodium formed are extracted from the fused mass by boiling it in distilled water. The extract so obtained is called Lassaigne’s extract. This Lassaigne’s extract is then tested for the presence of nitrogen, sulphur, halogens, and phosphorous.

(a) Test for nitrogen

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Chemistry of the test

In the Lassaigne’s test for nitrogen in an organic compound, the sodium fusion extract is boiled with iron (II) sulphate and then acidified with sulphuric acid. In the process, sodium cyanide first reacts with iron (II) sulphate and forms sodium hexacyanoferrate (II). Then, on heating with sulphuric acid, some iron (II) gets oxidised to form iron (III) hexacyanoferrate (II), which is Prussian blue in colour. The chemical equations involved in the reaction can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(b) Test for sulphur

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Chemistry of the test

In the Lassaigne’s test for sulphur in an organic compound, the sodium fusion extract is acidified with acetic acid and then lead acetate is added to it. The precipitation of lead sulphide, which is black in colour, indicates the presence of sulphur in the compound.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Chemistry of the test

The sodium fusion extract is treated with sodium nitroprusside. Appearance of violet colour also indicates the presence of sulphur in the compound.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

If in an organic compound, both nitrogen and sulphur are present, then instead of NaCN, formation of NaSCN takes place.

Na +C +N +S → NaSCN

This NaSCN (sodium thiocyanate) gives a blood red colour. Prussian colour is not formed due to the absence of free cyanide ions.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

(c) Test for halogens

  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Chemistry of the test

In the Lassaigne’s test for halogens in an organic compound, the sodium fusion extract is acidified with nitric acid and then treated with silver nitrate.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

If nitrogen and sulphur both are present in the organic compound, then the Lassaigne’s extract is boiled to expel nitrogen and sulphur, which would otherwise interfere in the test for halogens.

Ques 12.22: Differentiate between the principle of estimation of nitrogen in an organic compound by
 (i) Dumas method and (ii) Kjeldahl’s method.

Ans: In Dumas method, a known quantity of nitrogen containing organic compound is heated strongly with excess of copper oxide in an atmosphere of carbon dioxide to produce free nitrogen in addition to carbon dioxide and water. The chemical equation involved in the process can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The traces of nitrogen oxides can also be produced in the reaction, which can be reduced to dinitrogen by passing the gaseous mixture over a heated copper gauge. The dinitrogen produced is collected over an aqueous solution of potassium hydroxide. The volume of nitrogen produced is then measured at room temperature and atmospheric pressure.

On the other hand, in Kjeldahl’s method, a known quantity of nitrogen containing organic compound is heated with concentrated sulphuric acid. The nitrogen present in the compound is quantitatively converted into ammonium sulphate. It is then distilled with excess of sodium hydroxide. The ammonia evolved during this process is passed into a known volume of H2SO4. The chemical equations involved in the process are

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

The acid that is left unused is estimated by volumetric analysis (titrating it against a standard alkali) and the amount of ammonia produced can be determined. Thus, the percentage of nitrogen in the compound can be estimated. This method cannot be applied to the compounds, in which nitrogen is present in a ring structure, and also not applicable to compounds containing nitro and azo groups.

Ques 12.23: Discuss the principle of estimation of halogens, sulphur and phosphorus present in an organic compound.

Ans: Estimation of halogens

Halogens are estimated by the Carius method. In this method, a known quantity of organic compound is heated with fuming nitric acid in the presence of silver nitrate, contained in a hard glass tube called the Carius tube, taken in a furnace. Carbon and hydrogen that are present in the compound are oxidized to form COand H2O respectively and the halogen present in the compound is converted to the form of AgX. This AgX is then filtered, washed, dried, and weighed.

Let the mass of organic compound be m g.

Mass of AgX formed = m1 g

1 mol of Agx contains 1 mol of X.

Therefore,

Mass of halogen in m1 g of AgX NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Estimation of Sulphur

In this method, a known quantity of organic compound is heated with either fuming nitric acid or sodium peroxide in a hard glass tube called the Carius tube. Sulphur, present in the compound, is oxidized to form sulphuric acid. On addition of excess of barium chloride to it, the precipitation of barium sulphate takes place. This precipitate is then filtered, washed, dried, and weighed.

Let the mass of organic compound be m g.

Mass of BaSO4 formed = m1 g

1 mol of BaSO4 = 233 g BaSO4 = 32 g of Sulphur

Therefore, m1 g of BaSO4 contains NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Estimation of phosphorus

In this method, a known quantity of organic compound is heated with fuming nitric acid. Phosphorus, present in the compound, is oxidized to form phosphoric acid. By adding ammonia and ammonium molybdate to the solution, phosphorus can be precipitated as ammonium phosphomolybdate.

Phosphorus can also be estimated by precipitating it as MgNH4POby adding magnesia mixture, which on ignition yields Mg2P2O7.

Let the mass of organic compound be m g.

Mass of ammonium phosphomolybdate formed = m1 g

Molar mass of ammonium phosphomolybdate = 1877 g

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

If P is estimated as Mg2P2O7,

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ques 12.24: Explain the principle of paper chromatography.

Ans: In paper chromatography, chromatography paper is used. This paper contains water trapped in it, which acts as the stationary phase. On the base of this chromatography paper, the solution of the mixture is spotted. The paper strip is then suspended in a suitable solvent, which acts as the mobile phase. This solvent rises up the chromatography paper by capillary action and in the procedure, it flows over the spot. The components are selectively retained on the paper (according to their differing partition in these two phases). The spots of different components travel with the mobile phase to different heights. The paper so obtained (shown in the given figure) is known as a chromatogram.

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ques 12.25: Why is nitric acid added to sodium extract before adding silver nitrate for testing halogens?

Ans: While testing the Lassaigne’s extract for the presence of halogens, it is first boiled with dilute nitric acid. This is done to decompose NaCN to HCN and Na2S to H2S and to expel these gases. That is, if any nitrogen and sulphur are present in the form of NaCN and Na2S, then they are removed. The chemical equations involved in the reaction are represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

 

Ques 12.26: Explain the reason for the fusion of an organic compound with metallic sodium for testing nitrogen, sulphur and halogens.

Ans: Nitrogen, sulphur, and halogens are covalently bonded in organic compounds. For their detection, they have to be first converted to ionic form. This is done by fusing the organic compound with sodium metal. This is called “Lassaigne’s test”. The chemical equations involved in the test are

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Carbon, nitrogen, sulphur, and halogen come from organic compounds.

Ques 12.27: Name a suitable technique of separation of the components from a mixture of calcium sulphate and camphor.

Ans: The process of sublimation is used to separate a mixture of camphor and calcium sulphate. In this process, the sublimable compound changes from solid to vapour state without passing through the liquid state. Camphor is a sublimable compound and calcium sulphate is a non-sublimable solid. Hence, on heating, camphor will sublime while calcium sulphate will be left behind.

Ques 12.28: Explain, why an organic liquid vaporises at a temperature below its boiling point in its steam distillation?

Ans: In steam distillation, the organic liquid starts to boil when the sum of vapour pressure due to the organic liquid (p1) and the vapour pressure due to water (p2) becomes equal to atmospheric pressure (p), that is, pp1p2

Since p1p2, organic liquid will vapourise at a lower temperature than its boiling point.

Ques 12.29: Will CCl4 give white precipitate of AgCl on heating it with silver nitrate? Give reason for your answer. 

Ans: CClwill not give the white precipitate of AgCl on heating it with silver nitrate. This is because the chlorine atoms are covalently bonded to carbon in CCl4. To obtain the precipitate, it should be present in ionic form and for this, it is necessary to prepare the Lassaigne’s extract of CCl4.

Ques 12.30: Why is a solution of potassium hydroxide used to absorb carbon dioxide evolved during the estimation of carbon present in an organic compound?

Ans: Carbon dioxide is acidic in nature and potassium hydroxide is a strong base. Hence, carbon dioxide reacts with potassium hydroxide to form potassium carbonate and water as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Thus, the mass of the U-tube containing KOH increases. This increase in the mass of U-tube gives the mass of CO2 produced. From its mass, the percentage of carbon in the organic compound can be estimated.

Ques 12.31: Why is it necessary to use acetic acid and not sulphuric acid for acidification of sodium extract for testing sulphur by lead acetate test?

Ans: Although the addition of sulphuric acid will precipitate lead sulphate, the addition of acetic acid will ensure a complete precipitation of sulphur in the form of lead sulphate due to common ion effect. Hence, it is necessary to use acetic acid for acidification of sodium extract for testing sulphur by lead acetate test.

Ques 12.32: An organic compound contains 69% carbon and 4.8% hydrogen, the remainder being oxygen. Calculate the masses of carbon dioxide and water produced when 0.20 g of this substance is subjected to complete combustion.

Ans: Percentage of carbon in organic compound = 69 %

That is, 100 g of organic compound contains 69 g of carbon.

∴0.2 g of organic compound will contain  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRevNCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Molecular mass of carbon dioxide, CO2 = 44 g

That is, 12 g of carbon is contained in 44 g of CO2.

Therefore, 0.138 g of carbon will be contained in NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev = 0.506 g of CO2

Thus, 0.506 g of CO2 will be produced on complete combustion of 0.2 g of organic compound.

Percentage of hydrogen in organic compound is 4.8.

i.e., 100 g of organic compound contains 4.8 g of hydrogen.

Therefore, 0.2 g of organic compound will contain NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is known that molecular mass of water (H2O) is 18 g.

Thus, 2 g of hydrogen is contained in 18 g of water.

∴0.0096 g of hydrogen will be contained in NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev of water

Thus, 0.0864 g of water will be produced on complete combustion of 0.2 g of the organic compound.

Ques 12.33: A sample of 0.50 g of an organic compound was treated according to Kjeldahl’s method. The ammonia evolved was absorbed in 50 mL of 0.5 M H2SO4. The residual acid required 60 mL of 0.5 M solution of NaOH for neutralisation. Find the percentage composition of nitrogen in the compound.

Ans: Given that, total mass of organic compound = 0.50 g

60 mL of 0.5 M solution of NaOH was required by residual acid for neutralisation.

60 mL of 0.5 M NaOH solution NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev  H2SO= 30 mL of 0.5 M H2SO4

∴Acid consumed in absorption of evolved ammonia is (50–30) mL = 20 mL

Again, 20 mL of 0.5 MH2SO4 = 40 mL of 0.5 MNH3

Also, since 1000 mL of 1 MNH3 contains 14 g of nitrogen,

∴ 40 mL of 0.5 M NH3 will contain NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev = 0.28 g of N

Therefore, percentage of nitrogen in 0.50 g of organic compound NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev = 56 %

 

Ques 12.34: 0.3780 g of an organic chloro compound gave 0.5740 g of silver chloride in Carius estimation. Calculate the percentage of chlorine present in the compound.

Ans: Given that,

Mass of organic compound is 0.3780 g.

Mass of AgCl formed = 0.5740 g

1 mol of AgCl contains 1 mol of Cl.

Thus, mass of chlorine in 0.5740 g of AgCl

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

∴ Percentage of chlorine NCERT Solutions - Organic Chemistry Class 11 Notes | EduRevNCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Hence, the percentage of chlorine present in the given organic chloro compound is NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev.

Ques 12.35: In the estimation of sulphur by Carius method, 0.468 g of an organic sulphur compound afforded 0.668 g of barium sulphate. Find out the percentage of sulphur in the given compound.

Ans: Total mass of organic compound = 0.468 g [Given]

Mass of barium sulphate formed = 0.668 g [Given]

1 mol of BaSO4 = 233 g of BaSO4 = 32 g of sulphur

Thus, 0.668 g of BaSO4 contains NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev of sulphur = 0.0917 g of sulphur

Therefore, percentage of sulphur NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev  = 19.59 %

Hence, the percentage of sulphur in the given compound is 19.59 %.

Ques 12.36: In the organic compound CH2=CH–CH2–CH2–C≡CH, the pair of hydridised orbitals involved in the formation of: C2 – C3 bond is:

(a) sp – sp
 (b) sp – sp
 (c) sp2 – sp3
 (d) sp3– sp3

Ans: NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

In the given organic compound, the carbon atoms numbered as 1, 2, 3, 4, 5, and 6 are sp, sp, sp3sp3sp2, and sp2 hybridized respectively. Thus, the pair of hybridized orbitals involved in the formation of C2-C3 bond is sp – sp3.

Ques 12.37: In the Lassaigne’s test for nitrogen in an organic compound, the Prussian blue colour is obtained due to the formation of:

(a) Na4[Fe(CN)6
 (b) Fe4[Fe(CN)6]3                   
 (c) Fe2[Fe(CN)6
 (d) Fe3[Fe(CN)6]4

Ans: In the Lassaigne’s test for nitrogen in an organic compound, the sodium fusion extract is boiled with iron (II) sulphate and then acidified with sulphuric acid. In the process, sodium cyanide first reacts with iron (II) sulphate and forms sodium hexacyanoferrate (II). Then, on heating with sulphuric acid, some iron (II) gets oxidised to form iron (III) hexacyanoferrate (II), which is Prussian blue in colour. The chemical equations involved in the reaction can be represented as

 NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Hence, the Prussian blue colour is due to the formation of Fe4[Fe(CN)6]3.

Ques 12.38: Which of the following carbocation is most stable?

(a)  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                 

(b)  NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev               

(c)   NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev                 

(d) NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

Ans: NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev  is a tertiary carbocation. A tertiary carbocation is the most stable carbocation due to the electron releasing effect of three methyl groups. An increased +I effect by three methyl groups stabilizes the positive charge on the carbocation.

Ques 12.39: The best and latest technique for isolation, purification and separation of organic compounds is:

(a) Crystallisation                   
 (b) Distillation            
 (c) Sublimation           
 (d) Chromatography

Ans: Chromatography is the most useful and the latest technique of separation and purification of organic compounds. It was first used to separate a mixture of coloured substances.

Ques 12.40: The reaction:

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRevis classified as :

(a) electrophilic substitution    

(b) nucleophilic substitution    

(c) elimination             

(d) addition

Ans: NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

It is an example of nucleophilic substitution reaction. The hydroxyl group of KOH (OH) with a lone pair of itself acts as a nucleophile and substitutes iodide ion in CH3CH2I to form ethanol.

Dynamic Test

Content Category

Related Searches

shortcuts and tricks

,

MCQs

,

video lectures

,

Exam

,

past year papers

,

Sample Paper

,

practice quizzes

,

Objective type Questions

,

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

,

mock tests for examination

,

Viva Questions

,

Important questions

,

Free

,

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

,

Semester Notes

,

pdf

,

Extra Questions

,

Previous Year Questions with Solutions

,

Summary

,

NCERT Solutions - Organic Chemistry Class 11 Notes | EduRev

,

study material

,

ppt

;