UPSC Exam  >  UPSC Notes  >  NCERT Video Summary: Class 6 to Class 12 (English)  >  Chapter Notes: Sources of Energy

Sources of Energy Class 10 Notes Science

Introduction

  • Energy comes in different forms and one form can be converted into another.
  • A source of energy is one which provide adequate amount of energy in a convenient form over a long period of time.

Need of energy

  • For making food
  • For lightning
  • For transport
  • For running machines
  • For industrial activities and agricultural work

Qualities of a Good Source of Energy

(i) Which would do a large amount of work per unit mass.
(ii) Cheap and easily available.
(iii) Easy to store and transport.
(iv) Safe to handle and use.
(v) Does not cause environmental pollution.


  • Fuels: The materials which are burnt to produce heat energy are known as fuels.
    Example: wood, coal, LPG, kerosene.
  • Characteristics of a Good Fuel
    • High calorific value (give more heat per unit mass).
    • Burn without giving out any smoke or harmful gases.
    • Proper ignition temperature.
    • Cheap and easily available.
    • Easy to handle, safe to transport.
    • Convenient to store.
    •  Burn smoothly.

Sources of Energy

Sources of Energy Class 10 Notes Science

Conventional Sources of Energy

  • Sources of energy which are known to most of the people.
    Example: fossil fuels, bio mass etc.

Fossil Fuels

  • Fuels developed from the fossils e.g., coal, petroleum.
  • Take millions of years to form.
  • Available in very limited amount.
  • These are non-renewable sources of energy.
  • India has about 6% share in the world reserved coal, that may last 250 years more at the present rate of consumption.

Pollution Caused by Fossil Fuels

  • Released oxides of carbon, nitrogen and sulphur (acidic in nature) which causes acid rain that damages trees, plants, reduces fertility of soil.
  • Produces large amount of CO2 in the atmosphere which causes green house effect leading to excessive heating of the earth.

Controlling Pollution Caused by Fossil Fuels

  • Increasing the efficiency of the combustion process.
  • Using various techniques to reduce the escape of harmful gases and ashes into the surroundings.

Thermal Power Plants 

Sources of Energy Class 10 Notes Science

  • A power plant which uses heat energy to generate electricity.
  • Burning of fossil fuels produces steam to run turbines.
  • Set up (power plants) near the coal and oil fields to minimize the cost of transportation and production.
  • Transmission of electricity is more efficient.

Hydro Power Plants

  • Convert the potential energy of falling water into electricity.
  • Hydro power plants are associated with Dams.
  • Around 25% of our country’s energy requirement is met by Hydro Power plants.

Advantages of Hydro power plants

  • No environmental pollution.
  • Flowing water is a renewable source of electric energy.
  • Construction of dams prevents flooding of rivers, provide water for irrigation.

Disadvantages of Hydro Power Plants

  • Large areas of agricultural land, a vast variety of flora and fauna, human settlements get submerged in the water of reservoir formed by the dam.
  • Large ecosystems are destroyed.
  • Vegetation that submerged under water rots under anaerobic conditions and produces large amount of methane which is a green house gas.
  • Creates the problems of satisfactory rehabilitation of displaced people.

Sources of Energy Class 10 Notes Science

Biomass

  • The dead parts of plants and trees and the waste materials of animals and man are called Biomass.

(i) Wood: It is a biomass and used as a fuel for a long time.

Disadvantages of using wood as fuel

  • Produces a lot of smoke on burning.
  • Do not produce much heat.
  • Thus by improvement in technology we can improve the efficiency of traditional sources of energy.
    For example: wood can be converted into much better fuel called charcoal.

(ii) Charcoal: When wood is burnt in limited supply of air, then water and other volatile materials gets removed and charcoal is formed.

  • Wood on limited supply of Oxygen gas get converted into Charcoal.

Charcoal is better fuel than wood because

  • It has higher calorific value than wood.
  • Does not produce smoke while burning.
  • It is a compact fuel, easy to handle and convenient to use.

(iii) Cowdung: It is biomass but it is not good to burn cow dung directly as fuel because :

  • produces lot of smoke.
  • cowdung does not burn completely, produces lot of ash as residue.
  • low calorific value.
  • by making bio gas (or gobar gas) from cow dung, we get a smokeless fuel.

(iv) Bio gas: It is produced in a biogas plant.

  • Anaerobic micro organisms decomposes the complex compound of the cow dung+water slurry.
  • It takes few day for the decomposition process and generate gases like methane, CO2, hydrogen and hydrogen sulphide.
  • Bio gas is stored in the gas tank above the digester from which they are drawn through pipes for use.
    Sources of Energy Class 10 Notes Science

Advantages of Bio gas

  • It is an excellent fuel as it contains upto 75% methane (CH4 ).
  • It burns without smoke.
  • Leaves no residue like ash in wood & coal burning.
  • Heating capacity is high.
  • It is also used for lighting.
  • Slurry left behind is used as excellent manure rich in nitrogen and phosphorus.
  • Safe and efficient method of waste disposal.

(v) Wind energy

  • Unequal heating of the landmass and water bodies by solar radiations generate air movement and causes wind to blow.
    Sources of Energy Class 10 Notes Science
  • Uses of kinetic energy generated by wind energy
    • to generate electricity by turning the rotor of the turbine.
    • to lift water from the well.
    • to run the flour mills.
    • The output of a single wind mill is quite small so a number of windmills are erected over a large area called wind energy farm.
    • The minimum wind speed for wind mill to serve as a source of energy is 15-20 KmPH.
  • Advantages of wind energy
    • Eco-friendly.
    • Efficient source of renewable energy.
    • No recurring expenses for production of electricity.
  • Disadvantages of wind energy
    • Wind energy farms need large area of land.
    • Difficulty in getting regular wind speed of 15-20 KmPH.
    • Initial cost of establishing wind energy farm is very high.
    • High level of maintenance of blades of wind mill.
  • Denmark is called the ‘Country of Winds’.
  • India is ranked 5 th in harnessing wind energy for the production of electricity.
  • In India largest wind energy farm has been established near Kanyakumari in Tamil Nadu and it generates 380 MW of electricity.

Alternate or Non-conventional Sources of Energy

  • Day by day, our demand for energy increases, so there is a need for another source of energy.

Reasons for alternate sources of energy

  • The fossil fuel reserves in the earth are limited which may get exhausted soon if we use them at the current rate.
  • Reduce the pressure on fossil fuels making them last for a much longer time.
  • To reduce the pollution level and to save the environment.

(i) Solar Energy

  • Sun is the ultimate source of energy.
  • Energy obtained from the sun is called solar energy.
    Solar constant = 1.4 KJ/s/m2
  • Outer edge of the earth receives solar energy equal to 1.4 KJ/s/m2 or 1.4 KW/m[... 1 KJ/s = 1 KW]

Solar energy devices:
(i) Solar cooker
(ii) Solar water heater
(iii) Solar cells

Geothermal Energy

  • ‘Geo’ means ‘earth’ and ‘thermal’ means ‘heat’.
  • Geothermal energy is the heat energy from hot rocks present inside the earth.
  • When underground water comes in contact with ‘hot spot’, steam is generated. Steam trapped in rocks is routed through pipes to a turbine and used to generate electricity.

Advantages of Geothermal energy

  • Economical to use geothermal energy.
  • Does not cause any pollution.

Limitations of Geothermal energy

  • Geothermal energy is not available everywhere.
  • Deep drilling in the earth to obtain geothermal energy is very difficult and expensive.
  • In New Zealand and USA, there are no. of power plants based on geothermal energy are operational.

Nuclear Energy

  • The energy released during a nuclear reaction is called nuclear energy.
  • It can be obtained by two types of nuclear reactions:
    (i) Nuclear fission
    (ii) Nuclear fusion

Nuclear Fission

  • ‘Fission’ means split up.
  • The process in which the heavy nucleus of a radioactive atom (such as uranium, plutonium or thorium) split up into smaller nuclei when bombarded with low energy neutrons, is called nuclear fission.
  • A tremendous amount of energy is produced.
  • U-235 is used as a fuel in nuclear reactor in form of uranium rods.

Working of Nuclear Fission

  • In a nuclear reactor self sustaining chain reaction releases energy at a controlled rate, which is used to produce steam and further generate electricity.

Major Nuclear Power Plants
(i) Tarapur (Maharashtra)
(ii) Rana Pratap Sagar (Rajasthan)
(iii) Kalpakkam (Tamil Nadu)
(iv) Narora (U. P.)
(v) Kakrapar (Gujrat)
(vi) Kaiga (Karnataka)


Nuclear Fusion

  • When two nuclei of light elements (like hydrogen) combine to form a heavy nucleus (like helium) and tremendous amount of energy is released is called nuclear fusion.
    Sources of Energy Class 10 Notes Science
  • Very-very high temperature and pressure is needed for fusion.
  • Hydrogen bomb is based on this phenomenon.
  • Nuclear fusion is the source of energy in the sun and other stars.

Advantage of Nuclear Fusion

  • Production of large amount of useful energy from a very small amount of nuclear fuel.
  • Does not produce green house gases like CO2.

Limitations of Nuclear Fusion

  • Environmental contamination due to improper nuclear waste storage and its disposal.
  • Risk of accidental leakage of harmful radiations.
  • High cost of installation.
  • Limited availability of nuclear fuel.

Environmental Consequences

  • Exploiting any source of energy disturbs the environment in some way or the other. 
  • The source we would choose depends upon following the factors:
    (i) Ease of extracting energy from the source.
    (ii) Cost of extracting energy from the source.
    (iii) Efficiency of technology available to extract energy.
    (iv) The environmental damage caused by using that source.
  • In other words, no source of energy is said to be pollution free. Some source are cleaner than the other.
    For example, solar cells may be pollution free but the assembly of the device would have cause some environmental damage.

Non-renewable Sources of Energy: Sources that will get depleted some day.

For example: Fossil fuel
Renewable Sources of Energy: Energy sources that can be regenerated and that will last for ever.
For example: Wind energy, water energy.

The document Sources of Energy Class 10 Notes Science is a part of the UPSC Course NCERT Video Summary: Class 6 to Class 12 (English).
All you need of UPSC at this link: UPSC
476 videos|360 docs

Top Courses for UPSC

FAQs on Sources of Energy Class 10 Notes Science

1. What are the different sources of energy?
Ans. The different sources of energy include fossil fuels (such as coal, oil, and natural gas), renewable energy sources (such as solar, wind, hydro, geothermal, and biomass), and nuclear energy.
2. How do fossil fuels generate energy?
Ans. Fossil fuels generate energy by burning them in power plants or engines. The heat produced from the combustion process is then used to generate steam, which drives turbines connected to generators. These generators produce electricity.
3. What are the advantages of renewable energy sources?
Ans. Renewable energy sources have several advantages. They are sustainable, meaning they can be replenished naturally. They produce lower greenhouse gas emissions compared to fossil fuels, reducing the impact on climate change. Renewable energy sources also promote energy independence and create new job opportunities.
4. What are the disadvantages of using fossil fuels for energy?
Ans. Using fossil fuels for energy has several disadvantages. They are non-renewable, meaning they will eventually run out. Fossil fuels also contribute to air pollution and greenhouse gas emissions, leading to climate change. Extraction and transportation of fossil fuels can also have negative environmental impacts.
5. How does nuclear energy work?
Ans. Nuclear energy is generated through a process called nuclear fission. During this process, the nucleus of an atom is split, releasing a large amount of energy in the form of heat. This heat is then used to generate steam, which drives turbines connected to generators, producing electricity. Nuclear power plants use uranium or plutonium as fuel for the fission process.
Explore Courses for UPSC exam

Top Courses for UPSC

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Sources of Energy Class 10 Notes Science

,

mock tests for examination

,

pdf

,

ppt

,

Important questions

,

Extra Questions

,

study material

,

Sources of Energy Class 10 Notes Science

,

Objective type Questions

,

Semester Notes

,

past year papers

,

video lectures

,

Exam

,

Previous Year Questions with Solutions

,

Free

,

practice quizzes

,

Viva Questions

,

shortcuts and tricks

,

Summary

,

Sample Paper

,

MCQs

,

Sources of Energy Class 10 Notes Science

;