12-Inventor Beginner Tutorial: Modify Menu in Sketch; move; scale; trim etc Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

this is tutele number 12 and we going to
continue talking about the sketch menu
the modify part let's start a new sketch
and here we have the modify section move
copy your head trim extend spread scale
stretch opposite I'm going to use them
quickly I'll give you an idea how to use
them so let's first start making a
circle somewhere and this activate the
move and select you select what you want
to move let's select this circle
reference point where you going to move
I'm going to use the origin so you can
see how you are moving your circle done
and now for the copy it making many
copies from your sketch let's activate
and select the circle select the point
where to the reference point for copying
I make the origin so make many copies of
this circle
and now for the retail you can rotate
the sketchy one so silly this is select
for example all of the activities lick
select pour and reference and the center
point for rotating I'm choosing the
origin so here you can put it your
sketches done you entered it just one
part with it I select one this center
point origin rotate done and then trim
it is unimportant the fashion so trim is
for cutting the exceed lines or so let's
activate the trail and just move over
these extra lines so yeah ten so lets
you stream again with two lines you have
one line here and this to a second line
let's trim this exceed part of this line
trim and choose that part then you are
trimming if you want to dream more so
choose this so this is how you use trim
for extend for example if you have two
lines let's draw two lines are not
crossing second line if you want to
connect them we need to extend them to
list choose extend let's extend this one
and again extend this one
yes shoes this one is extended to the
next profile even you can extend it more
but I'm gonna just to cross this line
with this line to on go to your stream
drink this part so now you have the
extend and for the scale you can make
another copy from your sketch but with a
different scale so let's silly this
choose point where to scale so I'm
making it made a bigger or smaller done
and for the stretch you can select what
you want to stretch and point where to
stretch your part done pop said put me
another profile from an existing profile
so let's make offset inside or outside
here is it and most-used two months from
this menu is the trim the offset so I
hope this quick tutorial is useful and
see you in the next tutorials
you