13-Inventor Beginner Tutorial: Extrude; types; edit feature Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

welcome to tutorial 13 after we gave you
the basic skill in sketching in the
previous lessons so now it's time to
move to the 3d model section so now the
3d model section continue contain the 3d
shapes and enter many options here we go
to use them in the next tutorials in
this lesson we're going to discuss about
the extrude
so let's first create to the sketch
choose one of these planes
let's make any close profile let's make
the circle
and it skips on constraint as we learn
in the previous lessons this stream key
okay so now after finishing this sketch
we can go to 3d model and extrude this
close profile so this window is appeared
to us here you have the option of
extrusion here you have the distance of
extrusion you can change it from here
for example 20 or from shortcut menu
here for example so now we have extruded
this close to five thirty millimeter and
if you notice here in the this menu you
have the extrusion if you want to read
it the extrusion just double click or
right click Edit feature and here you
can again change the distance extrusion
and there are other extrusion types if
you want to change the direction you
just simply click on this icon if you
want to make a symmetric extrusion it
will be in this symmetric or asymmetry
you can make two different extrusion for
example you can just drag this arrow up
and down so you can change the direction
of the first direction and here also you
can change the the extrusion of the
second direction
please just add some values not again
it's he did feature or is extrude here
now let's add the second to be 25 and
then press ok