60 AutoDesk Inventor Tutorial: Copy Object Body Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

tutorial number 60 in Inventor in this
tutorial we're going to talk about the
next feature the copy object so let's
create some fast solid parts the screed
box here okay and on cylinder on the top
of it okay so now let's go to the copy
object as you notice it has many option
you have either to copy a face or body
and he the create a new you have
prepared geometry surface or composite
in this tutorial we're going to show how
to the difference between the surface
and the repaired geometry in this
tutorial you're going to use the
repaired geometry so now when you hover
over the body so you are able to select
the whole body and if you hold over face
you are able to select single faces so
now let's make it a body and we have
selected the repair geometry and it's a
lake this poor boy and now you it is not
seem but we have the placated bodies in
the same place and if you notice here
sold bodies we have two bodies
so let's control Z to show you here only
one solid and when we go to object body
repair geometry so have a look here
slick this body apply so we have two
solid bodies in the next tutorials we
could to use the move bodies show you
that there are two bodies on the same
place and in the second option in the
copy object is the face and if you
select the geometry
and face logically it is not body or
geometry the face solid body so if you
select that face and then apply so you
will notice you created a surface or
composite here so the necessary are we
going to show you the difference between
the geometry and the surface when you
are using this surface option