All Courses
Explore Courses UPSC Exam UPSC Test Series Free Notes EduRev Infinity Get the App Login Join for Free
Sign in Open App
CLAT Exam  >  CLAT Questions  >  The acid used in lead storage cells is &ndash... Start Learning for Free
SaveJoin the Discussion on the App
The acid used in lead storage cells is –
  • a)
    phosphoric acid  
  • b)
    hydrochloric acid  
  • c)
    nitric acid  
  • d)
    sulphuric acid
Correct answer is option 'D'. Can you explain this answer?
FREE This question is part of
Download PDF Attempt Test
Download PDF Attempt this Test
Verified Answer
The acid used in lead storage cells is –a)phosphoric acid b)hydr...
Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead storage battery. The electrodes of the cells in a lead storage battery consist of lead grids. The openings of the anodic grid is filled with spongy (porous) lead. The opehings of the cathodic grid is filled with lead dioxide (PBO2).
View all questions of this test
Most Upvoted Answer
The acid used in lead storage cells is –a)phosphoric acid b)hydr...
Sulfuric acid.
Attention CLAT Students!
To make sure you are not studying endlessly, EduRev has designed CLAT study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in CLAT.
< Previous Question Next Question >
Explore Courses for CLAT exam

Similar CLAT Doubts

Read the passage and answer the following question.The flip side of the agricultural bounty in Punjab — of foodgrain stock going waste — has again been flagged by the Comptroller and Auditor General of India, which has said in its report that the Punjab AgroFoodgrains Corporation Limited and Punjab State Warehousing Corporation allowed wheat worth Rs 607 crore to rot in four years owing to inadequate storage arrangements. The foodgrain was sufficient to feed all 1.36 crore beneficiaries under the atta-dal scheme for three months.Arrangement is made to store foodgrains in different ways, like in covered godowns, silos and on elevated plinths. There are rules stipulated for the storage. Fumigation and treatment of crops with pesticides have to be undertaken in the godowns whereas in the covered-at-plinth (CAP) storage system, wooden crates are used for dunnage and the stacks are covered with specially fabricated waterproof polythene covers and tied with ropes. Despite this, the vagaries of weather like unseasonal rain create problems. This arrangement is meant to be temporary. What compounds the problem is the slow movement of grains from the godowns — where they are mostly stored for the Central pool — to the designated destinations. With the other states also witnessing an increase in the production of crops, grain disposal takes time, exacerbated by the shortage of labour, transportation and packaging material like gunny bags. With the stock of previous years still not disposed of, the procurement of fresh grain stock and their storage becomes a tough task.Q.If the statements in the given passage are true, then which of the following would also be true?

DIRECTIONS for the question:Read the information given below and answer the question that follows.The floor of a workshop is in the shape of a square where four machines are in cells 1, 3, 5 and 7. In cell 9, in the centre, a robot is placed which supplies raw material to all the four machines.1. The finished product from cell 1 is passed to cell 2, cell 3 to cell 4, cell 5 to cell 6 and cell 7 to cell 8 through a conveyor belt. Every machine sends a signal to the robot, one second before it needs a material. The robot receives the signal without any time delay and supplies the material to respective machine and comes back. It takes one second each way.2. If there is more than one signal at a time, then it supplies material to the machine whose cell number is smaller as the cells are numbered as per the importance of their operations.3. When there are no signals from cells 1, 3, 5 or 7, the robot checks the availability of the finished goods in cell 2, 4, 6 and 8 without any time lag and brings them to cell 9 in 4 seconds (2 seconds each way)4. If there is a signal from cells 1, 3, 5 and 7 when the robot is bringing finished goods, they are executed after the robot comes back. If in those two seconds there are more than 2 signals, then they are executed in the sequence in which they were made and if made simultaneously, the one from the cell with a smaller number is executed first.5. There is a conveyor belt attached to the centre cell, which supplies the raw material and takes away the finished goods continuously. If a robot receives a signal in the beginning of the 1st, 3rd, 8th, 9th, second from cells 3, 1, 5 and 7 respectively and recognizes the availability of the finished good in cell 6 in the beginning of the seventh second, then answer the following questions.The time lag = (Time at which the robot delivers the raw material) – (Time at which the signal is sent by the cell) – 1Q. The time lag is maximum for a machine in which of the following cells in the first minute?

DIRECTIONS for the question:Read the information given below and answer the question that follows.The floor of a workshop is in the shape of a square where four machines are in cells 1, 3, 5 and 7. In cell 9, in the centre, a robot is placed which supplies raw material to all the four machines.1. The finished product from cell 1 is passed to cell 2, cell 3 to cell 4, cell 5 to cell 6 and cell 7 to cell 8 through a conveyor belt. Every machine sends a signal to the robot, one second before it needs a material. The robot receives the signal without any time delay and supplies the material to respective machine and comes back. It takes one second each way.2. If there is more than one signal at a time, then it supplies material to the machine whose cell number is smaller as the cells are numbered as per the importance of their operations.3. When there are no signals from cells 1, 3, 5 or 7, the robot checks the availability of the finished goods in cell 2, 4, 6 and 8 without any time lag and brings them to cell 9 in 4 seconds (2 seconds each way)4. If there is a signal from cells 1, 3, 5 and 7 when the robot is bringing finished goods, they are executed after the robot comes back. If in those two seconds there are more than 2 signals, then they are executed in the sequence in which they were made and if made simultaneously, the one from the cell with a smaller number is executed first.5. There is a conveyor belt attached to the centre cell, which supplies the raw material and takes away the finished goods continuously. If a robot receives a signal in the beginning of the 1st, 3rd, 8th, 9th, second from cells 3, 1, 5 and 7 respectively and recognizes the availability of the finished good in cell 6 in the beginning of the seventh second, then answer the following questions.The time lag = (Time at which the robot delivers the raw material) – (Time at which the signal is sent by the cell) – 1Q. The total waiting time in a cycle is defined as the sum of the time lags of all the machines in all the four cells. What is the total waiting time for the given cycle?

Top Courses for CLATView all

Top Courses for CLAT

The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer?
Question Description
The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? for CLAT 2024 is part of CLAT preparation. The Question and answers have been prepared according to the CLAT exam syllabus. Information about The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? covers all topics & solutions for CLAT 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer?.
Solutions for The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? in English & in Hindi are available as part of our courses for CLAT. Download more important topics, notes, lectures and mock test series for CLAT Exam by signing up for free.
Here you can find the meaning of The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer?, a detailed solution for The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? has been provided alongside types of The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice The acid used in lead storage cells is –a)phosphoric acid b)hydrochloric acid c)nitric acid d)sulphuric acidCorrect answer is option 'D'. Can you explain this answer? tests, examples and also practice CLAT tests.
Explore Courses for CLAT exam

Top Courses for CLAT

Explore Courses

Suggested Free Tests

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Get App
© EduRev
Education Revolution
Follow Us
Signup to see your scores go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup