GATE Exam > GATE Questions > A transmission line with a characteristic imp...
Start Learning for Free
A transmission line with a characteristic impedance of 100 Ω is used to match a
50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and
1GHz, the length of the transmission line can be approximately
50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and
1GHz, the length of the transmission line can be approximately
- a)82.5 cm
- b)1.05m
- c)1.58 cm
- d)1.75m
Correct answer is option 'C'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A transmission line with a characteristic impedance of 100 Ω is ...
Option (C) is correct.
Most Upvoted Answer
A transmission line with a characteristic impedance of 100 Ω is ...
Ohms is a type of cable or wire used to transmit electrical signals over long distances. It is designed to match the impedance of the source and load devices, allowing for efficient transmission of signals without reflections or loss of power.
The characteristic impedance of 100 Ohms means that the cable is designed to have a consistent impedance throughout its length, which helps to minimize signal distortion and ensure proper signal transmission.
Transmission lines with a characteristic impedance of 100 Ohms are commonly used in various applications, including telecommunications, data transmission, and audio/video transmission. They can be found in Ethernet cables, coaxial cables, and other types of cables used in electronics and telecommunications systems.
It is important to note that the characteristic impedance of a transmission line should match the impedance of the devices it is connected to in order to achieve optimal signal transmission. Mismatched impedance can lead to signal reflections, signal loss, and other issues.
The characteristic impedance of 100 Ohms means that the cable is designed to have a consistent impedance throughout its length, which helps to minimize signal distortion and ensure proper signal transmission.
Transmission lines with a characteristic impedance of 100 Ohms are commonly used in various applications, including telecommunications, data transmission, and audio/video transmission. They can be found in Ethernet cables, coaxial cables, and other types of cables used in electronics and telecommunications systems.
It is important to note that the characteristic impedance of a transmission line should match the impedance of the devices it is connected to in order to achieve optimal signal transmission. Mismatched impedance can lead to signal reflections, signal loss, and other issues.
|
Explore Courses for GATE exam
|
|
A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer?
Question Description
A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer?.
A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer?.
Solutions for A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE.
Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
Here you can find the meaning of A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer?, a detailed solution for A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? has been provided alongside types of A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A transmission line with a characteristic impedance of 100 Ω is used to match a50 Ω section to a 200 Ω section. If the matching is to be done both at 429MHz and1GHz, the length of the transmission line can be approximatelya)82.5 cmb)1.05mc)1.58 cmd)1.75mCorrect answer is option 'C'. Can you explain this answer? tests, examples and also practice GATE tests.
|
|
Explore Courses for GATE exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup