The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer?

Explore Courses UPSC Exam UPSC Test Series Free Notes EduRev Infinity

Open App

GATE Exam > GATE Questions > The lining of a box-type furnace is made up o...

Join the Discussion on the App

The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m^-2, and heat flow is along x-direction, the thermal contact resistance (W^-1.m².K) between refractory and steel is _____________

Correct answer is between '0.42,0.44'. Can you explain this answer?

FREE This question is part of

Metallurgical Engineering - MT 2016 GATE Paper (Practice Test)

Attempt Test

Attempt this Test

View all answers Start learning for free

< Previous Question Next Question >

Explore Courses for GATE exam

Similar GATE Doubts

Water flows through a tube of 3 cm internal diameter and length 20 m, The outside surface of the tube is heated electrically so that it is subjected to uniform heat flux circumferentially and axially. The mean inlet and exit temperatures of the water are 10°C and 70°C, respectively. The mass flow rate of the water is 720 kg/h. Disregard the thermal resistance of the tube wall. The internal heat transfer coefficient is 1697 W/m2K. Take specific heat Cp of water as 4.179 kJ/kgK. The inner surface temperature at the exit section of the tube is __________ °C (round off to one decimal plac e). Correct answer is '85.7'. Can you explain this answer?

View answer

Heat transfer through a composite wall is shown in figure. Both the sections of the wall haveequal thickness (l). The conductivity of one section is k and that of the other is 2k. The leftface of the wall is at 600 K and the right face is at 300 K. The interface temperature Ti (in K)of the composite wall is _______ Correct answer is between '399,401'. Can you explain this answer?

View answer

A composite wall is made of fourdifferent materials of construction in the fashion shown below.The resistance (in K/W) of each of the sections of the wall is indicated in the diagramThe overall resistance (in K/W, rounded off to the first decimal plac e) of the composite wallin the direction of heat flow, is___Imp : you should answer only the numeric value Correct answer is '3.9'. Can you explain this answer?

View answer

An electrical resistance strain gauge of resistance 120Ω has a gauge factor of 2. It is bonded to a steel specimen (modulus of elasticity, E = 2 * 1011 N/m2) for measuring strain. Estimate: (2002)(

View answer

The temperature of the coolant oil bath for a transformer is monitored using the circuit shown. It contains a thermistor with a temperature-dependent resistance, Rthermistor = 2(1 + αT) kΩ. Where T is the temperature in °C. The temperature coefficient α, is –(4 ± 0.25) %/°C. Circuit parameters: R1 = 1 kΩ, R2 = 1.3 kΩ, R3 = 2.6 kΩ. The error in the output signal (in V. rounded off lo 2 decimal places) at 150° C is ________. Correct answer is '0.04'. Can you explain this answer?

View answer

The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer?

Share with a Friend

Answer this doubt

Question Description
The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer?.

Solutions for The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE. Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.

Here you can find the meaning of The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer?, a detailed solution for The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? has been provided alongside types of The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice The lining of a box-type furnace is made up of a refractory layer and steel plate as shown in the figure. Steady state temperature at the surface of the refractory is 1273 K and that at the outer steel surface is 473 K. If the steady-state heat flux through the refractory-steel plate composite is 1600 W.m-2, and heat flow is along x-direction, the thermal contact resistance (W-1.m2.K) between refractory and steel is _____________Correct answer is between '0.42,0.44'. Can you explain this answer? tests, examples and also practice GATE tests.

Explore Courses for GATE exam