GATE Exam > GATE Questions > Match list-I with List-II and select the cor...
Start Learning for Free
Match list-I with List-II and select the correct answer using the codes given below the list:
List –I
(Material properties)
A) Ductility
B) Toughness
C) Endurance limit
D) Resistance to penetration
List-II
(Test to determine properties)
1) Impact test
2) Fatigue test
3) Tension test
4) Hardness test
- a)A3, B2, C1, D4
- b)A4, B2, C1, D3
- c)A3, B1, C2, D4
- d)A4, B1, C2, D3
Correct answer is option 'C'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
Match list-I with List-II and select the correct answer using the cod...
- Ductility is measured in a tensile test on UTM.
- Toughness is measured by an impact load on Charpy Izod test.
- Fatigue machine uses static, dynamic, and fatigue test to measure endurance.
- Rockwell hardness test is uses the principle of penetration fot checking hardness of metals.
Most Upvoted Answer
Match list-I with List-II and select the correct answer using the cod...
List-I(Material properties):
A) Ductility
B) Toughness
C) Endurance limit
D) Resistance to penetration
List-II(Test to determine properties):
1) Impact test
2) Fatigue test
3) Tension test
4) Hardness test
The correct answer is option C, i.e., A3, B1, C2, D4.
Explanation:
Ductility is the ability of a material to undergo plastic deformation without breaking. It is determined by conducting a tension test, where the material is subjected to an increasing load until it fractures. Therefore, ductility is determined by the tension test.
Toughness is the ability of a material to absorb energy up to fracture. It is determined by conducting an impact test, where a pendulum or hammer is dropped onto the material and the energy absorbed is measured. Therefore, toughness is determined by the impact test.
Endurance limit is the maximum stress below which a material can withstand an infinite number of cycles without failure. It is determined by conducting a fatigue test, where the material is subjected to cyclic loading until failure. Therefore, the endurance limit is determined by the fatigue test.
Resistance to penetration refers to the ability of a material to resist indentation or penetration by a harder material. It is determined by conducting a hardness test, where a hard indenter is pressed into the material and the depth or size of the indentation is measured. Therefore, resistance to penetration is determined by the hardness test.
Based on the above explanations, the correct matching between the material properties and the tests to determine them is as follows:
A) Ductility - Tension test (A3)
B) Toughness - Impact test (B1)
C) Endurance limit - Fatigue test (C2)
D) Resistance to penetration - Hardness test (D4)
Hence, the correct answer is option C, i.e., A3, B1, C2, D4.
A) Ductility
B) Toughness
C) Endurance limit
D) Resistance to penetration
List-II(Test to determine properties):
1) Impact test
2) Fatigue test
3) Tension test
4) Hardness test
The correct answer is option C, i.e., A3, B1, C2, D4.
Explanation:
Ductility is the ability of a material to undergo plastic deformation without breaking. It is determined by conducting a tension test, where the material is subjected to an increasing load until it fractures. Therefore, ductility is determined by the tension test.
Toughness is the ability of a material to absorb energy up to fracture. It is determined by conducting an impact test, where a pendulum or hammer is dropped onto the material and the energy absorbed is measured. Therefore, toughness is determined by the impact test.
Endurance limit is the maximum stress below which a material can withstand an infinite number of cycles without failure. It is determined by conducting a fatigue test, where the material is subjected to cyclic loading until failure. Therefore, the endurance limit is determined by the fatigue test.
Resistance to penetration refers to the ability of a material to resist indentation or penetration by a harder material. It is determined by conducting a hardness test, where a hard indenter is pressed into the material and the depth or size of the indentation is measured. Therefore, resistance to penetration is determined by the hardness test.
Based on the above explanations, the correct matching between the material properties and the tests to determine them is as follows:
A) Ductility - Tension test (A3)
B) Toughness - Impact test (B1)
C) Endurance limit - Fatigue test (C2)
D) Resistance to penetration - Hardness test (D4)
Hence, the correct answer is option C, i.e., A3, B1, C2, D4.
|
Explore Courses for GATE exam
|
|
Similar GATE Doubts
Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer?
Question Description
Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer?.
Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer?.
Solutions for Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE.
Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
Here you can find the meaning of Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer?, a detailed solution for Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? has been provided alongside types of Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice Match list-I with List-II and select the correct answer using the codes given below the list:List –I(Material properties)A) DuctilityB) ToughnessC) Endurance limitD) Resistance to penetrationList-II(Test to determine properties)1) Impact test2) Fatigue test3) Tension test4) Hardness testa)A3, B2, C1, D4b)A4, B2, C1, D3c)A3, B1, C2, D4d)A4, B1, C2, D3Correct answer is option 'C'. Can you explain this answer? tests, examples and also practice GATE tests.
|
|
Explore Courses for GATE exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup