GATE Exam > GATE Questions > Circular arc on a part profile is being machi...
Start Learning for Free
Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:
--------------------------------
N60 G01 X 30 Y 55 Z – 5 F 50
N70 G02 X 50 Y 35 R 20
N80 G01 Z 5
--------------------------------
The coordinates of the centre of the circular arc are :
--------------------------------
N60 G01 X 30 Y 55 Z – 5 F 50
N70 G02 X 50 Y 35 R 20
N80 G01 Z 5
--------------------------------
The coordinates of the centre of the circular arc are :
- a)(30, 55)
- b)(50, 55)
- c)(50, 35)
- d)(30, 35)
Correct answer is option 'D'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
Circular arc on a part profile is being machined on a vertical CNC mil...
Most Upvoted Answer
Circular arc on a part profile is being machined on a vertical CNC mil...
Given:
CNC part program using metric units with absolute dimensions:
N60 G01 X 30 Y 55 Z 5 F 50
N70 G02 X 50 Y 35 R 20
N80 G01 Z 5
To find:
The coordinates of the center of the circular arc.
Solution:
The given CNC part program consists of three lines. Let's analyze each line to find the coordinates of the center of the circular arc.
Line N60:
G01 - This command specifies linear interpolation.
X 30 - This command moves the tool in the X-axis to the coordinate 30.
Y 55 - This command moves the tool in the Y-axis to the coordinate 55.
Z 5 - This command moves the tool in the Z-axis to the coordinate 5.
F 50 - This command sets the feed rate to 50.
So, the tool moves to the point (30, 55, 5) in three-dimensional space.
Line N70:
G02 - This command specifies circular interpolation in a clockwise direction.
X 50 - This command moves the tool in the X-axis to the coordinate 50.
Y 35 - This command moves the tool in the Y-axis to the coordinate 35.
R 20 - This command specifies the radius of the circular arc, which is 20.
The center of the circular arc can be found by moving 20 units perpendicular to the line joining the current position (30, 55, 5) and the target position (50, 35, 5). The direction of the movement is determined by the circular interpolation direction, which is clockwise (G02).
Since the target position is (50, 35, 5), the center of the circular arc is the point that is 20 units away from the line joining (30, 55, 5) and (50, 35, 5) in the clockwise direction.
Line N80:
G01 - This command specifies linear interpolation.
Z 5 - This command moves the tool in the Z-axis to the coordinate 5.
This line doesn't affect the coordinates of the center of the circular arc.
Final Answer:
The coordinates of the center of the circular arc are (30, 35). Therefore, the correct answer is option 'D'.
CNC part program using metric units with absolute dimensions:
N60 G01 X 30 Y 55 Z 5 F 50
N70 G02 X 50 Y 35 R 20
N80 G01 Z 5
To find:
The coordinates of the center of the circular arc.
Solution:
The given CNC part program consists of three lines. Let's analyze each line to find the coordinates of the center of the circular arc.
Line N60:
G01 - This command specifies linear interpolation.
X 30 - This command moves the tool in the X-axis to the coordinate 30.
Y 55 - This command moves the tool in the Y-axis to the coordinate 55.
Z 5 - This command moves the tool in the Z-axis to the coordinate 5.
F 50 - This command sets the feed rate to 50.
So, the tool moves to the point (30, 55, 5) in three-dimensional space.
Line N70:
G02 - This command specifies circular interpolation in a clockwise direction.
X 50 - This command moves the tool in the X-axis to the coordinate 50.
Y 35 - This command moves the tool in the Y-axis to the coordinate 35.
R 20 - This command specifies the radius of the circular arc, which is 20.
The center of the circular arc can be found by moving 20 units perpendicular to the line joining the current position (30, 55, 5) and the target position (50, 35, 5). The direction of the movement is determined by the circular interpolation direction, which is clockwise (G02).
Since the target position is (50, 35, 5), the center of the circular arc is the point that is 20 units away from the line joining (30, 55, 5) and (50, 35, 5) in the clockwise direction.
Line N80:
G01 - This command specifies linear interpolation.
Z 5 - This command moves the tool in the Z-axis to the coordinate 5.
This line doesn't affect the coordinates of the center of the circular arc.
Final Answer:
The coordinates of the center of the circular arc are (30, 35). Therefore, the correct answer is option 'D'.
Free Test
FREE
| Start Free Test |
Community Answer
Circular arc on a part profile is being machined on a vertical CNC mil...
D
|
Explore Courses for GATE exam
|
|
Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer?
Question Description
Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer?.
Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer?.
Solutions for Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE.
Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
Here you can find the meaning of Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer?, a detailed solution for Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? has been provided alongside types of Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice Circular arc on a part profile is being machined on a vertical CNC milling machine. CNC part program using metric units with absolute dimensions is listed below:--------------------------------N60 G01 X 30 Y 55 Z – 5 F 50N70 G02 X 50 Y 35 R 20N80 G01 Z 5--------------------------------The coordinates of the centre of the circular arc are :a)(30, 55)b)(50, 55)c)(50, 35)d)(30, 35)Correct answer is option 'D'. Can you explain this answer? tests, examples and also practice GATE tests.
|
|
Explore Courses for GATE exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup