GATE Exam  >  GATE Questions  >  A straight turning operation is carried out u... Start Learning for Free
A straight turning operation is carried out using a single point cutting tool on an AISI 1020 steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cutting edge angle of 60°. The uncut chip thickness (in mm) is _______
(Important - Enter only the numerical value in the answer) 
    Correct answer is between '0.08,0.12'. Can you explain this answer?
    Verified Answer
    A straight turning operation is carried out using a single point cutti...
    View all questions of this test
    Most Upvoted Answer
    A straight turning operation is carried out using a single point cutti...
    °. The cutting speed is 150 m/min. Determine the cutting time for a 500 mm long workpiece.

    To find the cutting time, we need to first calculate the spindle speed (N) using the cutting speed formula:

    Cutting speed = πDN/1000
    150 = πD*N/1000

    Rearranging the formula, we have:
    N = (150 * 1000) / (πD)
    N = 47746.84 / D

    Next, we can calculate the feed rate (f) using the formula:

    Feed rate = N * feed
    f = N * 0.2
    f = 0.2N

    Now, we can calculate the number of revolutions (R) required to machine the workpiece:

    R = Length / feed
    R = 500 / 0.2
    R = 2500

    Finally, we can calculate the cutting time (T) using the formula:

    T = R / N
    T = 2500 / N

    Substituting the value of N from earlier, we get:

    T = 2500 / (47746.84 / D)
    T = (2500 * D) / 47746.84

    Let's assume the diameter (D) of the steel rod is 50 mm.

    T = (2500 * 50) / 47746.84
    T = 2.62 seconds

    Therefore, the cutting time for a 500 mm long workpiece is approximately 2.62 seconds.
    Explore Courses for GATE exam

    Similar GATE Doubts

    A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer?
    Question Description
    A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer?.
    Solutions for A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE. Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
    Here you can find the meaning of A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer?, a detailed solution for A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? has been provided alongside types of A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice A straight turning operation is carried out using a single point cutting tool on an AISI 1020steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm. The tool has a side cuttingedge angle of 60°. The uncut chip thickness (in mm) is _______(Important - Enter only the numerical value in the answer)Correct answer is between '0.08,0.12'. Can you explain this answer? tests, examples and also practice GATE tests.
    Explore Courses for GATE exam
    Signup for Free!
    Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
    10M+ students study on EduRev