GATE Exam > GATE Questions > A single point right handed turning tool is u...
Start Learning for Free
A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev and the uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edge is 10o. The back rake angle (in degrees) is _______
(Important - Enter only the numerical value in the answer)
Correct answer is '10'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A single point right handed turning tool is used for straight turning....
Turning operation,
i = inclination angle = 10o,
i = inclination angle = 10o,
Most Upvoted Answer
A single point right handed turning tool is used for straight turning....
Given information:
- Feed (f) = 0.25 mm/rev
- Uncut chip thickness (t₁) = 0.25 mm
- Inclination angle of the main cutting edge (α) = 10°
To find:
- Back rake angle (β)
Solution:
Step 1: Understand the terms:
- Feed (f): It is the distance the tool advances along the workpiece for each revolution of the workpiece.
- Uncut chip thickness (t₁): It is the thickness of the chip before it is cut by the tool.
- Inclination angle of the main cutting edge (α): It is the angle between the main cutting edge and the normal to the workpiece surface.
Step 2: Calculate the back rake angle:
The back rake angle (β) can be calculated using the following formula:
β = α - φ
Where φ is the inclination angle of the tool face.
In this case, we are given that the tool is a right-handed turning tool, which means the inclination angle of the tool face (φ) is zero degrees. Therefore,
β = α - φ
β = 10° - 0°
β = 10°
Step 3: Conclusion:
The back rake angle (β) is 10°.
- Feed (f) = 0.25 mm/rev
- Uncut chip thickness (t₁) = 0.25 mm
- Inclination angle of the main cutting edge (α) = 10°
To find:
- Back rake angle (β)
Solution:
Step 1: Understand the terms:
- Feed (f): It is the distance the tool advances along the workpiece for each revolution of the workpiece.
- Uncut chip thickness (t₁): It is the thickness of the chip before it is cut by the tool.
- Inclination angle of the main cutting edge (α): It is the angle between the main cutting edge and the normal to the workpiece surface.
Step 2: Calculate the back rake angle:
The back rake angle (β) can be calculated using the following formula:
β = α - φ
Where φ is the inclination angle of the tool face.
In this case, we are given that the tool is a right-handed turning tool, which means the inclination angle of the tool face (φ) is zero degrees. Therefore,
β = α - φ
β = 10° - 0°
β = 10°
Step 3: Conclusion:
The back rake angle (β) is 10°.
|
Explore Courses for GATE exam
|
|
Similar GATE Doubts
A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer?
Question Description
A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer?.
A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer?.
Solutions for A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE.
Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
Here you can find the meaning of A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer?, a detailed solution for A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? has been provided alongside types of A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A single point right handed turning tool is used for straight turning. The feed is 0.25 mm/rev andthe uncut chip thickness is found to be 0.25 mm. The inclination angle of the main cutting edgeis 10o. The back rake angle (in degrees) is _______(Important - Enter only the numerical value in the answer)Correct answer is '10'. Can you explain this answer? tests, examples and also practice GATE tests.
|
|
Explore Courses for GATE exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup