GATE Exam > GATE Questions > A batch of 11 resistors of 100 Q nominal valu...
Start Learning for Free
A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)
Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.
Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?
Correct answer is '0.810'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A batch of 11 resistors of 100 Q nominal value, when measured, gave th...
Output volt-ampere = 5 VA
Output resistance = 
For purely inductive load, δ = 0
then R = Rn + Io / Is (sin δ cos α + cos δ sin α)
V2 = 100 + sin 45° = 101 1 R — R
Ratio error = 
Phase angle error,
= 0.810 degree
When one turn was removed from the secondary, then
n = 99
Ratio error = 
and phase angle error,
= 0.810 degree
Most Upvoted Answer
A batch of 11 resistors of 100 Q nominal value, when measured, gave th...
Output volt-ampere = 5 VA
Output resistance = 
For purely inductive load, δ = 0
then R = Rn + Io / Is (sin δ cos α + cos δ sin α)
V2 = 100 + sin 45° = 101 1 R — R
Ratio error = 
Phase angle error,
= 0.810 degree
When one turn was removed from the secondary, then
n = 99
Ratio error = 
and phase angle error,
= 0.810 degree
|
Explore Courses for GATE exam
|
|
Similar GATE Doubts
A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer?
Question Description
A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer?.
A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? for GATE 2024 is part of GATE preparation. The Question and answers have been prepared according to the GATE exam syllabus. Information about A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? covers all topics & solutions for GATE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer?.
Solutions for A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? in English & in Hindi are available as part of our courses for GATE.
Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free.
Here you can find the meaning of A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer?, a detailed solution for A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? has been provided alongside types of A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A batch of 11 resistors of 100 Q nominal value, when measured, gave the following readings. (2002)Determine the % tolerance of the batch. 120Ω resistors are made using these 100Ω resistors having a tolerance of 3%. Determine the tolerance of the 120Ω resistors.Q. A 100/1 A, 5 VA UPF bar primary current transformer (CT), when measuring 100 A draws a magnetizing current of √2∠45A. Reference phasor is the flux in the core. Determine the ratio and phase errors of the CT. If one turn were removed from the secondary of the CT, then what would be its ratio and phase errors?Correct answer is '0.810'. Can you explain this answer? tests, examples and also practice GATE tests.
|
|
Explore Courses for GATE exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup